Nissan Rogue. Manual — part 701

EVAP CANISTER

FL-19

< REMOVAL AND INSTALLATION >

C

D

E

F

G

H

I

J

K

L

M

A

FL

N

P

O

EVAP CANISTER

Exploded View

INFOID:0000000011279622

Removal and Installation

INFOID:0000000011279623

NOTE:

The EVAP canister vent control valve and EVAP control system pressure sensor can be removed without

removing the EVAP canister.

REMOVAL

1. Disconnect the EVAP control system pressure sensor harness connector and the EVAP canister vent con-

trol valve harness connector.

2. Remove EVAP canister filter (1) and place aside (

).

3. Disconnect the EVAP canister purge hose, the EVAP vent line, and the EVAP canister vent control valve

hose.

4. Remove the EVAP canister bolt.
5. Remove the EVAP canister from the vehicle.
6. Remove EVAP control system pressure sensor and EVAP canister vent control valve (if necessary).

INSTALLATION

Installation is in the reverse order of removal.

1. EVAP control system pressure sensor 2. O-ring

3.

EVAP canister

4. EVAP canister vent control valve

5. EVAP canister vent control valve hose 6.

EVAP vent line

7. EVAP canister purge hose

8. Clamp

9.

EVAP canister protector

Front

AWBIA2258ZZ

(2) : EVAP canister

: Front

ALBIA1221ZZ

FL-20

< REMOVAL AND INSTALLATION >

EVAP CANISTER

Inspection

INFOID:0000000011279624

Check EVAP canister as follows:
1. Block port (B).
2. Blow air into port (A) and check that it flows freely out of port (C).
3. Release blocked port (B).
4. Apply vacuum pressure to port (B) and check that vacuum pres-

sure exists at the ports (A) and (C).

5. Block port (A) and (B).
6. Apply pressure to port (C) and check that there is no leakage.

JMBIA0961ZZ

EVAP CANISTER VENT CONTROL VALVE

FL-21

< REMOVAL AND INSTALLATION >

C

D

E

F

G

H

I

J

K

L

M

A

FL

N

P

O

EVAP CANISTER VENT CONTROL VALVE

Exploded View

INFOID:0000000011279625

Removal and Installation

INFOID:0000000011279626

NOTE:

The EVAP canister vent control valve can be removed without removing the EVAP canister.

REMOVAL

1. Disconnect EVAP canister vent control valve hose from EVAP canister vent control valve.
2. Disconnect EVAP canister vent control valve harness connector.
3. Turn EVAP canister vent control valve counterclockwise.

4. Remove the EVAP canister vent control valve and O-ring.

INSTALLATION

Installation is in the reverse order of removal.

CAUTION:

Do not reuse O-ring.

1. EVAP control system pressure sensor 2. O-ring

3.

EVAP canister

4. EVAP canister vent control valve

5. EVAP canister vent control valve hose 6.

EVAP vent line

7. EVAP canister purge hose

8. Clamp

9.

EVAP canister protector

Front

AWBIA2258ZZ

(A)

: Lock

(B)

: Unlock

ALBIA0794ZZ

FL-22

< REMOVAL AND INSTALLATION >

EVAP CONTROL SYSTEM PRESSURE SENSOR

EVAP CONTROL SYSTEM PRESSURE SENSOR

Exploded View

INFOID:0000000011279627

Removal and Installation

INFOID:0000000011279628

NOTE:

The EVAP canister system pressure sensor can be removed without removing the EVAP canister.

REMOVAL

1. Disconnect EVAP canister purge hose from EVAP canister.
2. Disconnect EVAP control system pressure sensor.
3. Remove EVAP control system pressure sensor and O-ring.

INSTALLATION

Installation is in the reverse order of removal.

CAUTION:

Do not reuse O-ring.

1. EVAP control system pressure sensor 2. O-ring

3.

EVAP canister

4. EVAP canister vent control valve

5. EVAP canister vent control valve hose 6.

EVAP vent line

7. EVAP canister purge hose

8. Clamp

9.

EVAP canister protector

Front

AWBIA2258ZZ