Nissan Qashqai J11. Manual — part 1715
FRONT COMBINATION LAMP
EXL-161
< REMOVAL AND INSTALLATION >
[LED HEADLAMP]
C
D
E
F
G
H
I
J
K
M
A
B
EXL
N
O
P
Removal and Installation
INFOID:0000000010338851
CAUTION:
Disconnect the battery negative terminal or remove power circuit fuse when performing the operation
for preventing electric leakage. Refer to
EXL-8, "Precautions for Removing Battery Terminal"
.
REMOVAL
1.
Remove front bumper fascia. Refer to
EXT-19, "Removal and Installation"
.
2.
Remove front combination lamp assembly mounting bolts.
3.
Pull out front combination lamp assembly forward the vehicle.
4.
Disconnect front combination lamp assembly harness connectors.
5.
Remove front combination lamp assembly.
INSTALLATION
Note the following item, and then install in the reverse order of removal.
CAUTION:
After installation, perform aiming adjustment. Refer to the following:
• LHD MODELS: Refer to
.
Front turn signal lamp bulb
Front turn signal lamp bulb socket
Front combination lamp bracket
Front combination lamp housing
JMLIA5092ZZ
EXL-162
< REMOVAL AND INSTALLATION >
[LED HEADLAMP]
FRONT COMBINATION LAMP
• RHD MODELS: Refer to
Replacement
INFOID:0000000010431361
CAUTION:
• Disconnect the battery negative terminal or remove power circuit fuse when performing the opera-
tion for preventing electric leakage. Refer to
EXL-8, "Precautions for Removing Battery Terminal"
.
• After installing the bulb, install the bulb socket securely for watertightness.
• Never touch the glass of bulb directly by hand. Keep grease and other oily matters away from it.
• Never touch bulb by hand while it is lit or right after being turned OFF.
• Never leave bulb out of lamp reflector for a long time because dust, moisture smoke, etc. may affect
the performance of lamp. When replacing bulb, be sure to replace it with new one.
HEADLAMP BULB (HI)
CAUTION:
Replacement of a single part is not possible due to the adoption of LED bulb. for replacement, replace
front combination lamp as a set.
HEADLAMP BULB (LO)
CAUTION:
Replacement of a single part is not possible due to the adoption of LED bulb. for replacement, replace
front combination lamp as a set.
DAYTIME RUNNING LIGHT/ PARKING LAMP BULB
CAUTION:
Replacement of a single part is not possible due to the adoption of LED bulb. for replacement, replace
front combination lamp as a set.
FRONT TURN SIGNAL LAMP BULB
LH side
1.
Remove air duct. Refer to the following.
• HRA2DDT: Refer to
EM-23, "Removal and Installation"
EM-147, "Removal and Installation"
• K9K: Refer to
EM-279, "Removal and Installation"
• R9M: Refer to
EM-380, "Removal and Installation"
.
2.
Rotate front turn signal lamp bulb socket counterclockwise and unlock it.
3.
Remove front turn signal lamp bulb socket from front combination lamp housing.
4.
Remove front turn signal lamp bulb from turn signal lamp bulb socket.
RH side
1.
Rotate front turn signal lamp bulb socket counterclockwise and unlock it.
2.
Remove front turn signal lamp bulb socket from front combination lamp housing.
3.
Remove front turn signal lamp bulb from turn signal lamp bulb socket.
Disassembly and Assembly
INFOID:0000000010338853
DISASSEMBLY
1.
Remove front combination lamp bracket mounting screws, and then remove front combination lamp
bracket from front combination lamp housing.
2.
Disconnect front combination lamp harness connectors.
3.
Rotate front turn signal lamp bulb socket counterclockwise and unlock it.
4.
Remove front turn signal lamp bulb socket from front combination lamp housing.
5.
Remove front turn signal lamp bulb from front turn signal lamp bulb socket.
ASSEMBLY
Note the following item, and then install in the reverse order of removal.
CAUTION:
• After installing the bulb, install the bulb socket securely watertightness.
• After installation, perform aiming adjustment. Refer to following.
- LHD models: Refer to
FRONT COMBINATION LAMP
EXL-163
< REMOVAL AND INSTALLATION >
[LED HEADLAMP]
C
D
E
F
G
H
I
J
K
M
A
B
EXL
N
O
P
- RHD models: Refer to
EXL-156, "RHD : Aiming Adjustment Procedure"
.
EXL-164
< REMOVAL AND INSTALLATION >
[LED HEADLAMP]
FRONT FOG LAMP
FRONT FOG LAMP
Exploded View
INFOID:0000000010338858
Removal and Installation
INFOID:0000000010338859
CAUTION:
Disconnect the battery negative terminal or remove power circuit fuse when performing the operation
for preventing electric leakage. Refer to
EXL-8, "Precautions for Removing Battery Terminal"
.
REMOVAL
1.
Remove front fender protector to make work space. Refer to
EXT-32, "Removal and Installation"
.
2.
Disconnect front fog lamp harness connector.
3.
Remove front fog lamp fixing bolt, and then remove front fog lamp.
INSTALLATION
Note the following item, and then install in the reverse order of removal.
NOTE:
After installation, perform aiming adjustment. Refer to
EXL-158, "Aiming Adjustment Procedure"
Replacement
INFOID:0000000010338860
CAUTION:
Front bumper fascia
Front bumper finisher
Front fog lamp
Front fog lamp bulb
: N·m (kg-m, in-lb)
JMLIA5093GB
Нет комментариевНе стесняйтесь поделиться с нами вашим ценным мнением.
Текст