Nissan Qashqai J11. Manual — part 1527
SUNSHADE SWITCH
RF-19
< DTC/CIRCUIT DIAGNOSIS >
C
D
E
F
G
H
I
J
L
M
A
B
RF
N
O
P
Is the inspection result normal?
YES
>> GO TO 4.
NO
>> Repair or replace harness or connector.
4.
CHECK SUNSHADE SWITCH
Check sunshade switch.
Refer to
Is the inspection result normal?
YES
>> Check intermittent incident. Refer to
GI-44, "Intermittent Incident"
.
NO
>> Replace sunshade switch. Refer to
RF-35, "Removal and Installation"
.
Component Inspection
INFOID:0000000010286641
1.
CHECK SUNSHADE SWITCH
1.
Turn ignition switch OFF.
2.
Disconnect sunshade switch connector.
3.
Check continuity sunshade switch terminals under the following conditions.
Is the inspection result normal?
YES
>> INSPECTION END
NO
>> Replace sunshade switch. Refer to
RF-35, "Removal and Installation"
.
Sunshade switch
Ground
Continuity
Connector
Terminal
R16
2
Existed
Terminal
Condition
Continuity
1
2
Sunshade switch
Open position
Existed
Other than the above
Not existed
3
Close position
Existed
Other than the above
Not existed
RF-20
< SYMPTOM DIAGNOSIS >
SUNSHADE DOES NOT OPERATE PROPERLY
SYMPTOM DIAGNOSIS
SUNSHADE DOES NOT OPERATE PROPERLY
Description
INFOID:0000000010286642
Sunshade does not operate normally.
• Sunshade does not slide.
• Judder occurs during sliding operation of sunshade.
• Sliding operation of sunshade is slow.
Diagnosis Procedure
INFOID:0000000010286643
1.
CHECK SUNSHADE MECHANISM
Check the following.
• Operation malfunction caused by sunshade mechanism deformation, pinched harness or other foreign
materials.
• Operation malfunction and interference with other parts by poor installation.
Is the inspection result normal?
YES
>> GO TO 2.
NO
>> Repair or replace the malfunctioning parts.
2.
CHECK SUNSHADE MOTOR ASSEMBLY POWER SUPPLY AND GROUND CIRCUIT
Check sunshade motor assembly power supply and ground circuit.
Refer to
RF-16, "SUNSHADE MOTOR ASSEMBLY : Diagnosis Procedure"
Is the inspection result normal?
YES
>> GO TO 3.
NO
>> Repair or replace the malfunctioning parts.
3.
CHECK SUNSHADE SWITCH
Check sunshade switch.
Refer to
RF-18, "Component Function Check"
Is the inspection result normal?
YES
>> Check intermittent incident. Refer to
GI-44, "Intermittent Incident"
.
NO
>> Repair or replace the malfunctioning parts.
AUTO OPERATION DOES NOT OPERATE
RF-21
< SYMPTOM DIAGNOSIS >
C
D
E
F
G
H
I
J
L
M
A
B
RF
N
O
P
AUTO OPERATION DOES NOT OPERATE
Description
INFOID:0000000010286644
Auto operation does not operate
• Auto operation of sunshade does not operate.
• Sunshade stops halfway.
• Anti-pinch function operates.
Diagnosis Procedure
INFOID:0000000010286645
1.
CHECK SUNSHADE MECHANISM
Check the following.
• Operation malfunction caused by sunshade mechanism deformation, pinched harness or other foreign
materials.
• Operation malfunction and interference with other parts by poor installation.
Is the inspection result normal?
YES
>> GO TO 2.
NO
>> Repair or replace the malfunctioning parts.
2.
PERFORM INITIALIZATION PROCEDURE
Perform initialization procedure.
Refer to
.
Is the inspection result normal?
YES
>> Check intermittent incident. Refer to
GI-44, "Intermittent Incident"
.
NO
>> Replace sunshade motor assembly. Refer to
RF-30, "Removal and Installation"
.
RF-22
< SYMPTOM DIAGNOSIS >
SUNSHADE DOES NOT OPERATE ANTI-PINCH FUNCTION
SUNSHADE DOES NOT OPERATE ANTI-PINCH FUNCTION
Diagnosis Procedure
INFOID:0000000010286646
1.
PERFORM INITIALIZATION PROCEDURE
Perform initialization procedure.
Refer to
.
Is the inspection result normal?
YES
>> INSPECTION END
NO
>> Check intermittent incident. Refer to
GI-44, "Intermittent Incident"
.
Нет комментариевНе стесняйтесь поделиться с нами вашим ценным мнением.
Текст