Nissan Qashqai J11. Manual — part 1778
PERSONAL LAMP
INL-77
< REMOVAL AND INSTALLATION >
C
D
E
F
G
H
I
J
K
M
A
B
INL
N
O
P
PERSONAL LAMP
Exploded View
INFOID:0000000010430933
Removal and Installation
INFOID:0000000010430934
REMOVAL
CAUTION:
Disconnect the battery negative terminal or remove power circuit fuse when performing the operation
for preventing electric leakage. Refer to
INL-3, "Precautions for Removing Battery Terminal"
1.
Disengage personal lamp assembly fixing metal clips using a
remover tool (A).
2.
Disconnect harness connector, and then remove personal lamp assembly.
INSTALLATION
Personal lamp base
Bulb
Lens
: Pawl
: Metal clip
: Vehicle front
JMLIA5188ZZ
: Metal clip
JMLIA5194ZZ
INL-78
< REMOVAL AND INSTALLATION >
PERSONAL LAMP
Install in the reverse order of removal.
Replacement
INFOID:0000000010430935
PERSONAL LAMP BULB
CAUTION:
• Disconnect the battery negative terminal or remove power circuit fuse when performing the opera-
tion for preventing electric leakage. Refer to
INL-3, "Precautions for Removing Battery Terminal"
• Never touch the glass surface of the bulb with bare hands or allow oil or grease to get on it for pre-
venting damage to the bulb.
• The surface of the bulb is very hot just after the lamp is turned OFF. Never touch the glass surface of
the bulb with bare hands for preventing burns.
• Leaving the bulb removed from housing for a long period of time can deteriorate performance of the
lens and reflector (due to dirt or clouding). Always prepare a new bulb and have it on hand when
replacing the bulb.
1.
Remove personal lamp assembly. Refer to
INL-77, "Removal and Installation"
2.
Disengage lens fixing pawls using a remover tool, and then
remove lens.
3.
Remove bulb.
: Pawl
JMLIA5195ZZ
LUGGAGE ROOM LAMP
INL-79
< REMOVAL AND INSTALLATION >
C
D
E
F
G
H
I
J
K
M
A
B
INL
N
O
P
LUGGAGE ROOM LAMP
Exploded View
INFOID:0000000010430936
Removal and Installation
INFOID:0000000010430937
REMOVAL
CAUTION:
Disconnect the battery negative terminal or remove power circuit fuse when performing the operation
for preventing electric leakage. Refer to
INL-3, "Precautions for Removing Battery Terminal"
1.
Apply protective tape (A) to rear pillar finisher LH of surface for
protecting it from damage.
Shade
Bulb
Lens
: Pawl
: Vehicle front
JMLIA5189ZZ
JMLIA5196ZZ
INL-80
< REMOVAL AND INSTALLATION >
LUGGAGE ROOM LAMP
2.
Disengage luggage room lamp assembly fixing pawl using a
remover tool (A).
3.
Disconnect harness connector, and then remove luggage room lamp assembly.
INSTALLATION
Install in the reverse order of removal.
Replacement
INFOID:0000000010430938
LUGGAGE ROOM LAMP BULB
CAUTION:
• Disconnect the battery negative terminal or remove power circuit fuse when performing the opera-
tion for preventing electric leakage. Refer to
INL-3, "Precautions for Removing Battery Terminal"
• Never touch the glass surface of the bulb with bare hands or allow oil or grease to get on it for pre-
venting damage to the bulb.
• The surface of the bulb is very hot just after the lamp is turned OFF. Never touch the glass surface of
the bulb with bare hands for preventing burns.
• Leaving the bulb removed from housing for a long period of time can deteriorate performance of the
lens and reflector (due to dirt or clouding). Always prepare a new bulb and have it on hand when
replacing the bulb.
1.
Remove luggage room lamp assembly. Refer to
INL-79, "Removal and Installation"
.
2.
Remove lens fixing pawls, and then remove lens.
3.
Remove bulb.
: Pawl
JMLIA5197ZZ
: Pawl
JMLIA5247ZZ
Нет комментариевНе стесняйтесь поделиться с нами вашим ценным мнением.
Текст