Nissan Qashqai J11. Manual — part 2036
MWI-80
< REMOVAL AND INSTALLATION >
COMBINATION METER
REMOVAL AND INSTALLATION
COMBINATION METER
Removal and Installation
INFOID:0000000010330004
REMOVAL
1.
Disconnect the negative battery terminal. refer to
2.
Remove the cluster lid A. Refer to
.
3.
Remove screws (A), from the combination meter (1).
4.
Release the clips and remove the combination meter (1) from
the instrument panel.
: Clips
5.
Disconnect the harness connectors from the combination meter
and remove.
INSTALLATION
Installation is in the reverse order of removal.
ALNIA1607ZZ
ALNIA1608ZZ
MWI
THE AMBIENT TEMPERATURE DISPLAY IS INCORRECT
MWI-81
< SYMPTOM DIAGNOSIS >
C
D
E
F
G
H
I
J
K
L
M
B
A
O
P
THE AMBIENT TEMPERATURE DISPLAY IS INCORRECT
Description
INFOID:0000000010330001
• The ambient air temperature display flashes and the ambient air temperature is not displayed.
• The displayed air ambient temperature is higher than the actual temperature.
• The displayed air ambient temperature is lower than the actual temperature.
Diagnosis Procedure
INFOID:0000000010330002
1.
CHECK AMBIENT SENSOR SIGNAL CIRCUIT
Check the ambient sensor signal circuit. Refer to
Is the inspection result normal?
YES
>> GO TO 2.
NO
>> Repair harness or connector.
2.
CHECK AMBIENT SENSOR
Perform a unit check for the ambient sensor. Refer to
MWI-74, "Component Inspection"
Is the inspection result normal?
YES
>> Replace combination meter.
NO
>> Replace ambient sensor. Refer to
MWI-82
< UNIT DISASSEMBLY AND ASSEMBLY >
COMBINATION METER
UNIT DISASSEMBLY AND ASSEMBLY
COMBINATION METER
Exploded View
INFOID:0000000010330006
Disassembly and Assembly
INFOID:0000000010330007
CAUTION:
• Do not touch the display, pointer, inside of combination meter or the printed area of the dial during
disassembly or assembly.
• Keep away from magnetic sources.
• Do not damage the combination meter lens.
DISASSEMBLY
1.
Remove the combination meter. Refer to
MWI-80, "Removal and Installation"
2.
Release pawls and remove the combination meter lens.
ASSEMBLY
Assembly is in the reverse order of disassembly.
1.
Combination meter
2.
Combination meter lens
Pawl
ALNIA1609ZZ
MWI
THE METER CONTROL SWITCH IS INOPERATIVE
MWI-83
< SYMPTOM DIAGNOSIS >
C
D
E
F
G
H
I
J
K
L
M
B
A
O
P
THE METER CONTROL SWITCH IS INOPERATIVE
Description
INFOID:0000000010435901
The meter control switches are inoperative when pressed.
Diagnosis Procedure
INFOID:0000000010435902
1.
CHECK METER CONTROL SWITCH SIGNAL
Check the meter control switch signal. Refer to
Is the inspection result normal?
YES
>> GO TO 2.
NO
>> Repair or replace harness or connector.
2.
CHECK METER CONTROL SWITCH
Check the meter control switch. Refer to
MWI-76, "Component Inspection"
Is the inspection result normal?
YES
>> Replace combination meter. Refer to
MWI-86, "Removal and Installation"
NO
>> Replace meter control switch. Refer to
MWI-87, "Removal and Installation"
.
Нет комментариевНе стесняйтесь поделиться с нами вашим ценным мнением.
Текст