Nissan Qashqai J11. Manual — part 1311
PREPARATION
DLK-513
< PREPARATION >
[TYPE 4]
C
D
E
F
G
H
I
J
L
M
A
B
DLK
N
O
P
PREPARATION
PREPARATION
Commercial Service Tools
INFOID:0000000010435118
Tool name
Description
Engine ear
Locating the noise
Remover tool
Remove the clips, pawls, and metal clips
Power tool
SIIA0995E
PIIB7923J
PIIB1407E
DLK-514
< SYSTEM DESCRIPTION >
[TYPE 4]
COMPONENT PARTS
SYSTEM DESCRIPTION
COMPONENT PARTS
Component Parts Location
INFOID:0000000010435119
Component Description
INFOID:0000000010435120
1.
Power window main switch
(door lock/unlock switch)
2.
BCM
Refer to
SYSTEM : Component Parts Loca-
tion"
3.
Combination meter
4.
Front power window switch (passen-
ger side) (door lock and unlock
switch)
5.
Door lock assembly
6.
Door switch
7.
Back door lock assembly
8.
Back door opener switch
JMKIB3273ZZ
Item
Function
Back door lock assembly
Opens the back door with the back door open signal from BCM.
BCM
BCM detects the vehicle status according to signals from each door switch and
each outside/inside key antenna. BCM transmits drive signal to door lock actuator
when BCM receives operation signal from remote keyless entry receiver and each
switch.
Refer to
BCS-6, "BODY CONTROL SYSTEM : Component Parts Location"
for de-
tailed installation location.
Combination meter
• Performs operation method guide and warning with buzzer.
• Transmits vehicle seep signal to CAN communication line.
Door lock actuator
• Inputs locks/unlocks signal from BCM and locks/unlocks each door.
• Integrated in each door lock assembly.
Door lock and unlock switch
Transmits door lock/unlock operation to BCM.
Door switch
Detects door open/close condition.
Keyfob
Transmits button operation to remote keyless entry receiver.
Key switch
Key switch detects that ignition key is inserted into the ignition key cylinder, and
then transmits the signal to BCM.
POWER DOOR LOCK SYSTEM
DLK-515
< SYSTEM DESCRIPTION >
[TYPE 4]
C
D
E
F
G
H
I
J
L
M
A
B
DLK
N
O
P
POWER DOOR LOCK SYSTEM
System Diagram
INFOID:0000000010435121
System Description
INFOID:0000000010435122
DOOR LOCK FUNCTION
Door Lock and Unlock Switch
• The door lock and unlock switch (driver side) is built into power window main switch.
• The door lock and unlock switch (passenger side) is built into front power window switch (passenger side).
• Interlocked with the locking operation of door lock and unlock switch, door lock actuators of all doors are
locked.
• Interlocked with the unlocking operation of door lock and unlock switch, door lock actuators of all doors actu-
ator are unlocked.
Unlock Sensor
• BCM locks all doors or unlocks all doors, when driver door lock knob is operated.
• With the mechanical key inserted in the door key cylinder on driver side, turning it to lock position, locks door
lock actuator of all doors.
• With the mechanical key inserted in the door key cylinder on driver side, turning it to unlock position, unlocks
door lock actuator of all doors.
Operation Condition
If all of the following conditions are satisfied, door lock and unlock operation is performed using the door lock
and unlock switch.
*
1
: While door lock and unlock switch is pressed in the lock direction during this state, combination meter buzzer sounds and warns.
*
2
: When this item becomes OK according to keyfob ID verification, door lock/unlock operation is allowed.
KEY REMINDER FUNCTION
• While ignition key is inserted in ignition key cylinder and driver door is open, door is not locked when door
lock and unlock switch is pressed in the lock direction. This prevents keyfob from being left in the vehicle.
• While door lock and unlock switch is pressed in the lock direction, combination meter buzzer sounds and
warns.
DOOR LOCK STATUS INDICATOR OPERATION
JMKIB2483GB
Door lock and unlock switch operation
Operation condition
LOCK
• Ignition Key is removed from ignition key cylinder and closed driver
side door*
1
• Doors other than drivers door are closed*
1
• Door are not locked by keyfob*
2
• Door lock that is requested is not auto door lock*
2
UNLOCK
Door are not locked by keyfob*
2
DLK-516
< SYSTEM DESCRIPTION >
[TYPE 4]
POWER DOOR LOCK SYSTEM
The door lock status indicator indicates door lock status under the following condition.
UNLOCK LINK FUNCTION
When driver door or passenger door is opened using the override function, all doors are unlocked.
Unlock function operates when driver door or passenger door is open while all of the following conditions are
satisfied.
NOTE:
When anti-hijack function is activated, only the applicable door is unlocked.
Indicator operation
Ignition position
Door status
Lock operation
ON (30 minutes timer)
OFF
All doors are closed and door
is locked
Door lock and unlock switch
ON
ON
All doors are closed and door
is locked
Door lock and unlock switch
ON (1 minute timer)
OFF
All doors are closed and door
is locked
Keyfob or auto door lock func-
tion
ON
ON
All doors are closed and door
is locked
Keyfob or auto door lock func-
tion
ON
→
OFF
–
(All doors are closed
→
any
door is open) or (All doors are
locked
→
any door is un-
locked)
–
ON (timer is running)
→
ON
(timer is stop)
OFF
→
ON
–
–
ON
→
ON (30 minutes timer)
ON
→
OFF
–
Door lock and unlock switch
ON
→
ON (1 minute timer)
ON
→
OFF
–
Keyfob or auto door lock func-
tion
Operation condition
• Doors are locked by door lock/unlock switch or by automatic lock/unlock function
• Driver or passenger door switch is switched from OFF to ON
• Anti-hijack function is not activated
• Vehicle speed is 5 km/h (3 MPH) or less
Нет комментариевНе стесняйтесь поделиться с нами вашим ценным мнением.
Текст