Nissan Leaf. Manual — part 1266
VTL-14
< REMOVAL AND INSTALLATION >
DUCTS AND GRILLES
4. Remove screw (A) from side ventilator grille RH (1).
5. Apply protective tape (A) on the part to protect it from damage.
6. Disengage side ventilator grille RH (1) pawls using a suitable
tool (A).
7. Remove side ventilator grille RH from instrument panel assembly.
INSTALLATION
Install in the reverse order of removal.
SIDE DEFROSTER GRILLE
SIDE DEFROSTER GRILLE : Removal and Installation
INFOID:0000000010120492
REMOVAL
1. Remove side defroster duct 1. Refer to
VTL-16, "SIDE DEFROSTER DUCT : Removal and Installation -
2. Remove screws (A), and then remove side defroster grille (1)
from instrument panel assembly.
JPIIA1824ZZ
1.
: Side ventilator grille RH
JMIIA2123ZZ
: Pawl
JPIIA1839ZZ
JPIIA1825ZZ
DUCTS AND GRILLES
VTL-15
< REMOVAL AND INSTALLATION >
C
D
E
F
G
H
J
K
L
M
A
B
VTL
N
O
P
INSTALLATION
Install in the reverse order of removal.
CENTER VENTILATOR DUCT
CENTER VENTILATOR DUCT : Removal and Installation
INFOID:0000000010120493
REMOVAL
1. Remove front defroster nozzle. Refer to
VTL-15, "FRONT DEFROSTER DUCT : Removal and Installa-
2. Remove screws (A), and then remove center ventilator duct (1)
from instrument panel assembly.
INSTALLATION
Install in the reverse order of removal.
SIDE VENTILATOR DUCT
SIDE VENTILATOR DUCT : Removal and Installation
INFOID:0000000010120494
REMOVAL
1. Remove instrument panel assembly. Refer to
IP-17, "Removal and Installation"
.
2. Remove screws (A), and then remove side ventilator duct (1) from the vehicle.
INSTALLATION
Install in the reverse order of removal.
FRONT DEFROSTER DUCT
FRONT DEFROSTER DUCT : Removal and Installation
INFOID:0000000010120495
REMOVAL
1. Remove side defroster duct 1. Refer to
VTL-16, "SIDE DEFROSTER DUCT : Removal and Installation -
JPIIA1826ZZ
JPIIA1827ZZ
VTL-16
< REMOVAL AND INSTALLATION >
DUCTS AND GRILLES
2. Remove screws (A), and then remove front defroster duct (1)
from instrument panel assembly.
INSTALLATION
Install in the reverse order of removal.
SIDE DEFROSTER DUCT
SIDE DEFROSTER DUCT : Removal and Installation - Side Defroster Duct 1
INFOID:0000000010120496
REMOVAL
Driver side
1. Remove instrument panel assembly. Refer to
IP-17, "Removal and Installation"
.
2. Remove screws (A), and then remove side defroster duct 1 (1)
from instrument panel assembly.
Passenger side
1. Remove instrument panel assembly. Refer to
IP-17, "Removal and Installation"
.
2. Remove screws (A) and harness clip (B), and then remove side
defroster duct 1 (1) from instrument panel assembly.
INSTALLATION
Install in the reverse order of removal.
SIDE DEFROSTER DUCT : Removal and Installation - Side Defroster Duct 2
INFOID:0000000010120497
REMOVAL
Remove instrument side panel. Refer to
INT-25, "INSTRUMENT SIDE PANEL : Removal and Installation"
.
JPIIA1828ZZ
JPIIA1829ZZ
JPIIA1830ZZ
DUCTS AND GRILLES
VTL-17
< REMOVAL AND INSTALLATION >
C
D
E
F
G
H
J
K
L
M
A
B
VTL
N
O
P
INSTALLATION
Install in the reverse order of removal.
FOOT DUCT
FOOT DUCT : Removal and Installation
INFOID:0000000010120498
DANGER:
Since hybrid vehicles and electric vehicles contain a high voltage battery, there is the risk of
electric shock, electric leakage, or similar accidents if the high voltage component and vehicle are
handled incorrectly. Be sure to follow the correct work procedures when performing inspection and
maintenance.
WARNING:
• Be sure to remove the service plug in order to disconnect the high voltage circuits before perform-
ing inspection or maintenance of high voltage system harnesses and parts.
• The removed service plug must always be carried in a pocket of the responsible worker or placed in
the tool box during the procedure to prevent the plug from being connected by mistake.
• Be sure to wear insulating protective equipment consisting of glove, shoes, face shield and glasses
before beginning work on the high voltage system.
• Never allow workers other than the responsible person to touch the vehicle containing high voltage
parts. To keep others from touching the high voltage parts, these parts must be covered with an insu-
lating sheet except when using them. Refer to
GI-34, "High Voltage Precautions"
CAUTION:
Never bring the vehicle into the READY status with the service plug removed unless otherwise
instructed in the Service Manual. A malfunction may occur if this is not observed.
REMOVAL
WARNING:
Disconnect the high voltage. Refer to
GI-33, "How to Disconnect High Voltage"
.
1. Check voltage in high voltage circuit. (Check that condenser are discharged.)
a. Lift up the vehicle and remove the Li-ion battery under covers. Refer to
b. Disconnect high voltage harness connector and PTC heater harness connector from front side of Li-ion
battery. Refer to
EVB-181, "Removal and Installation"
.
c. Measure voltage between high voltage harness connector terminals and PTC heater harness connector
terminals.
DANGER:
Touching high voltage components without using the appropriate protective equipment will
cause electrocution.
CAUTION:
For voltage measurements, use a tester which can measure to 500 V or higher.
REMOVAL
Standard
: 5 V or less
JPCIA0296ZZ
Нет комментариевНе стесняйтесь поделиться с нами вашим ценным мнением.
Текст