Nissan Leaf. Manual — part 1265
VTL-10
< PERIODIC MAINTENANCE >
IN-CABIN MICROFILTER
6. Pull out in-cabin microfilter (1) from heating and cooling unit
assembly, and then remove in-cabin microfilter through bottom
of glove box.
CAUTION:
If the filter is deformed/damaged when removing, replace it
with a new one. Deformed/damaged filter may deteriorate
the dust collecting performance.
INSTALLATION
Note the following items, and then install in the reverse order of removal.
NOTE:
When installing in-cabin microfilter, visually check the operation through glove box mask opening.
CAUTION:
When installing, handle the filter with extreme care to avoid deforming/damaging.
JPIIA1846ZZ
VENTILATION SYSTEM
VTL-11
< SYSTEM DESCRIPTION >
C
D
E
F
G
H
J
K
L
M
A
B
VTL
N
O
P
SYSTEM DESCRIPTION
VENTILATION SYSTEM
System Description
INFOID:0000000010120488
DESCRIPTION
Ventilation system is controlled by the A/C auto amp. Refer to
(WITH HEAT PUMP)
OUTLETS AND AIR MIX RATIO
Front
Rear
JMIIA2034ZZ
AWIIA1660ZZ
MODE/
DEF setting
Air mix ratio (%)
Ventilator
Foot
Defroster
Left side
(1)
Left center
(2)
Right center
(3)
Right side
(4)
Front right
(5)
Front left
(6)
Rear left
(7)
Rear right
(7)
Front
(8)
Side
(9)
25
25
25
25
–
–
–
–
–
–
15
15
15
15
14
14
6
6
–
–
7.5
–
–
7.5
22.5
22.5
10
10
10
10
7.5
–
–
7.5
16
16
6.5
6.5
20
20
7.5
–
–
7.5
–
–
–
–
42.5
42.5
VTL-12
< REMOVAL AND INSTALLATION >
DUCTS AND GRILLES
REMOVAL AND INSTALLATION
DUCTS AND GRILLES
Exploded View
INFOID:0000000010120489
FRONT
CENTER VENTILATOR GRILLE
1.
Side defroster duct 2 LH
(Instrument side panel LH)
2.
Side defroster duct 1 LH
3.
Side ventilator duct LH
4.
Side defroster grille LH
5.
Instrument panel assembly
6.
Side ventilator grille LH
7.
Cluster lid C
8.
Center ventilator grille LH
9.
Center ventilator grille RH
10. Side ventilator grille RH
11. Side defroster grille RH
12. Side ventilator duct RH
13. Side defroster duct 2 RH
(Instrument side panel RH)
14. Foot duct RH
15. Foot duct LH
16. Heating and cooling unit assembly
17. Side defroster duct 1 RH
18. Center ventilator duct
19. Front defroster duct
Pawl
Metal clip
JPIIA1797ZZ
DUCTS AND GRILLES
VTL-13
< REMOVAL AND INSTALLATION >
C
D
E
F
G
H
J
K
L
M
A
B
VTL
N
O
P
CENTER VENTILATOR GRILLE : Removal and Installation
INFOID:0000000010120490
REMOVAL
1. Remove cluster lid C. Refer to
IP-17, "Removal and Installation"
2. Disengage pawls, and then remove center ventilator grille (1)
from cluster lid C.
INSTALLATION
Install in the reverse order of removal.
SIDE VENTILATOR GRILLE
SIDE VENTILATOR GRILLE : Removal and Installation
INFOID:0000000010120491
REMOVAL
Driver side
1. Remove instrument mask LH. Refer to
IP-17, "Removal and Installation"
.
2. Remove instrument side panel LH. Refer to
INT-25, "INSTRUMENT SIDE PANEL : Removal and Installa-
3. Remove front pillar garnish LH. Refer to
INT-26, "FRONT PILLAR GARNISH : Removal and Installation"
.
4. Remove instrument lower panel LH. Refer to
IP-17, "Removal and Installation"
5. Disengage side ventilator grille LH (1) pawls and metal clips.
6. Disconnect switch connector, and then remove side ventilator grille LH from instrument panel assembly.
Passenger side
1. Remove instrument mask RH. Refer to
IP-17, "Removal and Installation"
2. Remove instrument side panel RH. Refer to
INT-25, "INSTRUMENT SIDE PANEL : Removal and Installa-
3. Remove front pillar garnish RH. Refer to
INT-26, "FRONT PILLAR GARNISH : Removal and Installation"
: Pawl
JPIIA1822ZZ
: Pawl
: Metal clip
JPIIA1892ZZ
Нет комментариевНе стесняйтесь поделиться с нами вашим ценным мнением.
Текст