Nissan Note E12. Manual — part 701
FRONT WASHER NOZZLE AND TUBE
WW-55
< REMOVAL AND INSTALLATION >
C
D
E
F
G
H
I
J
K
M
A
B
WW
N
O
P
FRONT WASHER NOZZLE AND TUBE
Exploded View
INFOID:0000000009606306
WASHER NOZZLE
WASHER NOZZLE : Removal and Installation
INFOID:0000000009606285
REMOVAL
1. Remove cowl top cover. Refer to
EXT-23, "Removal and Installation"
.
2. Disconnect front washer tube from front washer nozzle (1).
3. Place cowl top cover (2) up side down and release front washer
nozzle pawl (A) using a suitable tool to remove.
INSTALLATION
Installation is in the reverse order of removal.
CAUTION:
After installation, adjust the nozzle spray pattern. Refer to
WW-56, "WASHER NOZZLE : Adjustment"
.
1.
Front washer nozzle (RH)
2.
Front washer tube
3.
Front washer motor
4.
Washer tank
5.
Front washer nozzle (LH)
A.
To rear washer
B.
Washer pump seal
Clip
ALLIA1306ZZ
AWLIA2161ZZ
WW-56
< REMOVAL AND INSTALLATION >
FRONT WASHER NOZZLE AND TUBE
WASHER NOZZLE : Adjustment
INFOID:0000000009606286
If washer nozzle (1) spray pattern is not within specification, adjust
using a suitable tool (A).
WASHER TUBE
WASHER TUBE : Removal and Installation
INFOID:0000000009606287
REMOVAL
1. Remove fender protector (RH). Refer to
EXT-24, "Removal and Installation"
.
2. Remove front washer tube from washer pump.
3. Remove cowl top cover. Refer to
EXT-23, "Removal and Installation"
.
4. Release the clips that retain the front washer tube to the vehicle body using a suitable tool and remove.
1.
Windshield glass
2.
Black printed area line
3.
Front washer nozzle (LH/RH)
A.
Center line
B.
509.7 mm (20.07 in)
C.
215.7 mm (8.49 in)
D.
614.5 mm (24.19 in)
E.
329.1 mm (12.96 in)
F.
41.0 mm (1.61 in)
G.
379.6 mm (14.94 in)
H.
161.1 mm (6.34 in)
J.
58.6 mm (2.31 in)
K.
58.0 mm (2.28 in)
M.
142.0 mm (5.59 in)
N.
365.9 mm (14.41 in)
O.
54.7 mm (2.15 in)
P.
492.5 mm (19.39 in)
Q.
652.2 mm (25.68 in)
R.
174.3 mm (6.86 in)
S.
520.7 mm (20.50 in)
ALLIA1307ZZ
JMLIA1327ZZ
FRONT WASHER NOZZLE AND TUBE
WW-57
< REMOVAL AND INSTALLATION >
C
D
E
F
G
H
I
J
K
M
A
B
WW
N
O
P
INSTALLATION
Installation is in the reverse order of removal.
WASHER TUBE : Inspection
INFOID:0000000009606329
INSPECTION
Check that air can pass through the nozzle (1) by blowing into the
nozzle and that air cannot flow in the opposite direction.
O: Air can flow
X: Air cannot flow
JMLIA1326ZZ
WW-58
< REMOVAL AND INSTALLATION >
FRONT WIPER ARM
FRONT WIPER ARM
Exploded View
INFOID:0000000009606288
Removal and Installation
INFOID:0000000009606289
REMOVAL
1. Open hood.
2. Operate wiper to move it to the auto stop position.
3. Remove wiper arm cap.
4. Remove wiper arm nut and wiper arm.
INSTALLATION
1. Clean wiper arm mount as shown. This will reduce the possibility
of wiper arm looseness.
2. Operate wiper motor to move the wiper to the auto stop position.
3. Adjust the front wiper blade position. Refer to
.
1.
Wiper arm cap (LH/RH)
2.
Wiper arm (LH)
3.
Wiper blade (LH)
4.
Wiper arm (RH)
5.
Wiper blade (RH)
6.
Front wiper drive
ALLIA1310ZZ
ELH0717D
Нет комментариевНе стесняйтесь поделиться с нами вашим ценным мнением.
Текст