Nissan Pathfinder. Manual — part 1185
INPUT SPEED SENSOR
TM-199
< REMOVAL AND INSTALLATION >
[CVT: RE0F10E]
C
E
F
G
H
I
J
K
L
M
A
B
TM
N
O
P
INPUT SPEED SENSOR
Exploded View
INFOID:0000000009177660
Removal and Installation
INFOID:0000000009177661
REMOVAL
1. Remove the battery tray. Refer to
PG-92, "Removal and Installation"
.
2. Remove the starter motor. Refer to
STR-20, "Removal and Installation"
.
3. Disconnect the harness connector from the input speed sensor
(1).
4. Remove the input speed sensor bolt, then the input speed sen-
sor (1).
5. Remove the O-ring (2) from the input speed sensor (1).
CAUTION:
Do not reuse O-ring.
INSTALLATION
Installation is in the reverse order of removal.
CAUTION:
• Do not reuse O-ring.
• Apply Genuine NISSAN CVT Fluid NS-3 to the O-ring.
Inspection and Adjustment
INFOID:0000000009177662
INSPECTION AFTER INSTALLATION
Check for CVT fluid leakage. Refer to
.
ADJUSTMENT AFTER INSTALLATION
Input speed sensor
O-ring
Transaxle assembly
: Always replace after every disassembly.
: N·m (kg-m, in-lb)
: Apply CVT fluid
JSDIA4131GB
ALDIA0362ZZ
TM-200
< REMOVAL AND INSTALLATION >
[CVT: RE0F10E]
INPUT SPEED SENSOR
Adjust CVT fluid level. Refer to
PRIMARY SPEED SENSOR
TM-201
< REMOVAL AND INSTALLATION >
[CVT: RE0F10E]
C
E
F
G
H
I
J
K
L
M
A
B
TM
N
O
P
PRIMARY SPEED SENSOR
Exploded View
INFOID:0000000009177663
Removal and Installation
INFOID:0000000009177664
REMOVAL
1. Disconnect the negative battery terminal. Refer to
PG-90, "Removal and Installation"
2. Remove the front fender protector side cover (LH). Refer to
EXT-28, "FENDER PROTECTOR : Removal
3. Disconnect the harness connector from primary speed sensor
(1).
4. Remove the primary speed sensor bolt, then the primary speed
sensor (1).
5. Remove the O-ring (2) from the primary speed sensor (1).
CAUTION:
Do not reuse O-ring.
INSTALLATION
Installation is in the reverse order of removal.
CAUTION:
• Do not reuse O-ring.
• Apply Genuine NISSAN CVT Fluid NS-3 to the O-ring.
Inspection and Adjustment
INFOID:0000000009177665
INSPECTION AFTER INSTALLATION
Check for CVT fluid leakage. Refer to
.
Transaxle assembly
Primary speed sensor
O-ring
: Always replace after every disassembly.
: N·m (kg-m, in-lb)
: Apply CVT fluid
JSDIA3620GB
ALDIA0361ZZ
TM-202
< REMOVAL AND INSTALLATION >
[CVT: RE0F10E]
PRIMARY SPEED SENSOR
ADJUSTMENT AFTER INSTALLATION
Adjust CVT fluid level. Refer to
Нет комментариевНе стесняйтесь поделиться с нами вашим ценным мнением.
Текст