Nissan Pathfinder. Manual — part 1027
SE-106
< REMOVAL AND INSTALLATION >
SECOND ROW SEATS
2. Release (
) the track tilt release cable (1) from the seat frame
assembly.
CAUTION:
Note the cable routing for correct installation.
3. Remove the track tilt release cable (1) from the seat frame
assembly (2) and release cable ends (A).
4. Remove the track tilt release cable (1).
Installation
Installation is in the reverse order of removal.
CAUTION:
Route cables correctly for proper function.
ALJIA0880ZZ
THIRD ROW SEATS
SE-107
< REMOVAL AND INSTALLATION >
C
D
E
F
G
H
I
K
L
M
A
B
SE
N
O
P
THIRD ROW SEATS
Exploded View
INFOID:0000000009727787
Removal and Installation
INFOID:0000000009727788
CAUTION:
• Before removal and installation, use shop cloths to protect parts from damage.
• During removal and installation, an assistant is required to protect against injury or damage.
REMOVAL
1. Release the pawls and remove the seat bolt finishers.
2. Remove the seat front bolts.
3. Pull the seatback release lever and fold down the seatbacks (LH/RH).
4. Remove the storage box. Refer to
INT-33, "STORAGE BOX : Removal and Installation"
5. Remove the four bolts, then remove the jack and jack bracket as an assembly.
1.
Seatback release lever and cable
(LH/RH)
2.
Seatback release lever finisher (LH/
RH)
3.
Headrest (LH)
4.
Headrest (RH)
5.
Headrest holders (RH)
6.
Headrest holders (LH)
7.
Seatback trim (RH)
8.
Seatback pad (RH)
9.
Seatback trim (LH)
10. Seatback pad (LH)
11. Seat cushion trim
12. Seat cushion pad
13. Seat belt buckle (RH)
14. Seat hinge finisher (center)
15. Seat bolt finisher
16. Seat belt buckle (LH)
17. Seat frame assembly
18. Seat hinge finisher (LH)
19. Seatback board (LH)
20. Seatback pull strap (LH)
21. Seatback cargo hook
22. Tether anchor finisher
23. Seatback pull strap (RH)
24. Seatback board (RH)
25. Seatback hinge finisher (RH)
AWJIA1017ZZ
SE-108
< REMOVAL AND INSTALLATION >
THIRD ROW SEATS
6. Release the clip (A) and remove the rear side cover (1).
LH side shown, RH side similar
: Front
7. Remove the two seat belt buckle anchor bolts. Refer to
8. Remove the seat rear bolts.
9. Remove the third row seat from the vehicle.
INSTALLATION
Installation is in the reverse order of removal.
NOTE:
• When installing the third row seat, tighten the bolts in the order
shown.
• Tighten the seat bolts to specification. Refer to
.
ALJIA0839ZZ
AWJIA1016ZZ
FRONT SEAT
SE-109
< UNIT DISASSEMBLY AND ASSEMBLY >
C
D
E
F
G
H
I
K
L
M
A
B
SE
N
O
P
UNIT DISASSEMBLY AND ASSEMBLY
FRONT SEAT
Exploded View
INFOID:0000000009727789
DRIVER SEAT WITH CLIMATE CONTROL
AWJIA0997ZZ
Нет комментариевНе стесняйтесь поделиться с нами вашим ценным мнением.
Текст