Nissan Pathfinder. Manual — part 1025
SE-98
< REMOVAL AND INSTALLATION >
SECOND ROW SEATS
1. Slide the LH seat to the full forward position and slide the RH seat to the full rearward position.
2. Remove outer finisher (LH) (1).
: Pawl
: Clip
3. Pull seat belt buckle through bottom of RH seat cushion.
4. Disconnect the harness connectors from the RH seat cushion heater (if equipped) and release the har-
ness from attachments.
NOTE:
Take note of harness routing and attachment location for correct installation.
5. Remove the support strut at bottom.
6. Remove seat cushion pivot bolt (
), then the RH seat cushion
(1).
Installation
Installation is in the reverse order of removal.
Seat Cushion Release Cable
INFOID:0000000009727782
LH SEAT
Removal
1. Remove the LH seat cushion. Refer to
.
2. Release pawls and remove the recline finisher (center) (1).
: Pawl
3. Release clip.
: Clip
4. Remove screws (
) and lift seat cushion latch finisher (2) to
remove.
: Metal clip
ALJIA0852ZZ
ALJIA0853ZZ
ALJIA0854ZZ
SECOND ROW SEATS
SE-99
< REMOVAL AND INSTALLATION >
C
D
E
F
G
H
I
K
L
M
A
B
SE
N
O
P
5. Remove the seat cushion release cable (1) from seat cushion
latch (2).
6. Release (
) the seat cushion release cable (1) from the seat
frame assembly (3).
CAUTION:
Note the cable routing for correct installation,
7. Release cable end (A) and remove seat cushion release cable.
Installation
Installation is in reverse order of removal.
CAUTION:
Route cables correctly for proper function.
RH SEAT
Removal
1. Remove RH seat cushion. Refer to
2. Remove the recline lever.
a. Remove snap ring (2) upward using a suitable tool.
b. Remove recline lever (3).
3. Remove screw (
) and the seat cushion outer finisher (RH) (1).
: Pawl
: Metal clip
4. Remove screws (
) and lift seat cushion latch finisher (1) to
remove.
: Metal clip
ALJIA1109ZZ
AWJIA0956ZZ
ALJIA0856ZZ
SE-100
< REMOVAL AND INSTALLATION >
SECOND ROW SEATS
5. Release (
) the seat cushion release cable (1) from the seat
frame assembly (3).
CAUTION:
Note the cable routing for correct installation.
a. Remove the seat cushion release cable (1) from the seat cush-
ion latch (2).
b. Separate the cushion release cable (1) from the seat frame
assembly (3).
c.
Release cable end (A) and remove seat cushion release cable
(1).
Installation
Installation is in reverse order of removal.
CAUTION:
Route cables correctly for proper function.
Seat Slide Release Cable
INFOID:0000000009727783
LH SEAT
Removal
1. Remove LH seat cushion. Refer to
.
2. Release pawls and remove the recline finisher (center) (1).
: Pawl
3. Release clip.
: Clip
4. Remove screws (
) and lift the seat cushion latch finisher (2) to
remove.
: Metal clip
ALJIA0876ZZ
ALJIA0854ZZ
SECOND ROW SEATS
SE-101
< REMOVAL AND INSTALLATION >
C
D
E
F
G
H
I
K
L
M
A
B
SE
N
O
P
5. Remove the seat slide release cable (1) from both RH side (A)
and LH side (B) of seat frame assembly.
a. Release (
) the seat slide release cable (1) from the seat frame
assembly.
CAUTION:
Note the cable routing for correct installation.
b. Release (
) the seat slide release cable (1).
c. Separate the seat slide release cable (1) from the seat frame
assembly (2).
d. Release cable end (A).
• RH side shown, LH side similar.
: Front
6. Separate the seat cushion release cable (3) from the seat slide
release cable (2).
: Front
7. Release cable end (B) and position the seat cushion release
cable (3) aside.
8. Separate the seat slide release cable (2) from the seat frame
assembly (1).
9. Remove the seat slide release cable end (A) and the seat slide
release cable.
Installation
Installation is in reverse order of removal.
CAUTION:
Route cables correctly for proper function.
RH SEAT
Removal
1. Remove RH seat cushion. Refer to
ALJIA1110ZZ
ALJIA1111ZZ
ALJIA0859ZZ
Нет комментариевНе стесняйтесь поделиться с нами вашим ценным мнением.
Текст