Nissan Pathfinder. Manual — part 1026
SE-102
< REMOVAL AND INSTALLATION >
SECOND ROW SEATS
2. Remove the recline lever.
a. Remove snap ring (2) upward using a suitable tool.
b. Remove recline lever (3).
3. Remove screw (
) and the seat cushion outer finisher (RH) (1).
: Pawl
: Metal clip
4. Remove screws (
) and lift seat cushion latch finisher (1) to
remove.
: Metal clip
5. Remove two screws and the rear finisher.
6. Remove the seat slide release cable (1) or (2) as necessary,
from the seat frame assembly (3).
a. Release (
) the seat slide release cable (1).
CAUTION:
Note the cable routing for correct installation.
b. Separate the seat slide release cable (1) from the seat frame
assembly (3).
c.
Release cable end (A) and remove the seat slide release cable
(1)
Installation
Installation is in reverse order of removal.
CAUTION:
Route cables correctly for proper function.
Recline Release Cable Assembly
INFOID:0000000009727784
LH SEAT
Removal
AWJIA0956ZZ
ALJIA0856ZZ
ALJIA0869ZZ
SECOND ROW SEATS
SE-103
< REMOVAL AND INSTALLATION >
C
D
E
F
G
H
I
K
L
M
A
B
SE
N
O
P
1. Remove the LH seat seatback. Refer to
.
NOTE:
It is not necessary to separate the seatback trim from the seatback pad.
2. Remove screws (A).
3. Release (
) the recline release cable assembly from the seat
frame assembly.
CAUTION:
Note the cable routing for correct installation.
4. Remove the support finishers (2) and (3).
5. Remove the recline release cable assembly (1) from the RH
side.
6. Remove the recline release cable assembly (1) from the LH
side.
Installation
Installation is in the reverse order of removal.
CAUTION:
Route cables correctly for proper function.
RH SEAT
Removal
1. Remove the RH seat seatback. Refer to
.
NOTE:
It is not necessary to separate the seatback trim from the seatback pad.
2. Remove the support finisher.
ALJIA0878ZZ
ALJIA0877ZZ
SE-104
< REMOVAL AND INSTALLATION >
SECOND ROW SEATS
3. Remove the recline release cable assembly screws (A).
4. Release (
) the recline release cable assembly (1) from the
seat frame assembly.
CAUTION:
Note the cable routing for correct installation.
5. Remove the recline release cable assembly (1) from routing
guide (B).
6. Remove the recline release cable assembly end (C) and the
recline release cable assembly (1).
Installation
Installation is in the reverse order of removal.
CAUTION:
Route cables correctly for proper function.
EZ Entry Cable
INFOID:0000000009727785
LH SEAT
Removal
1. Remove LH seat seatback. Refer to
.
NOTE:
It is not necessary to separate the seatback trim from the seatback pad.
2. Remove support finishers (2) and (3).
3. Remove EZ entry cable (1) from routing guides (
).
CAUTION:
Note the cable routing for correct installation
4. Remove the EZ entry cable (1) from the RH side.
5. Remove the EZ entry cable (1) from the LH side.
6. Remove the EZ entry cable.
ALJIA0881ZZ
ALJIA0879ZZ
SECOND ROW SEATS
SE-105
< REMOVAL AND INSTALLATION >
C
D
E
F
G
H
I
K
L
M
A
B
SE
N
O
P
Installation
Installation is in the reverse order of removal.
CAUTION:
Route cables correctly for proper function.
RH SEAT
Removal
1. Remove the RH seatback. Refer to
.
NOTE:
It is not necessary to separate the seatback trim from the seatback pad.
2. Remove the support finisher.
3. Remove the EZ entry cable (3) from the routing guide (C).
CAUTION:
Note the cable routing for correct installation.
4. Release (
) the EZ entry cable (3) from the seat frame assem-
bly.
5. Remove the track tilt release cable (2) from the seat frame
assembly (1) and release cable end (A).
6. Remove cable end (B) and the EZ entry cable (3).
Installation
Installation is in the reverse order of removal.
CAUTION:
Route cables correctly for proper function.
RH Seat Track Tilt Release Cable
INFOID:0000000009727786
Removal
1. Remove the RH seat seatback. Refer to
.
NOTE:
It is not necessary to separate the seatback trim from the seatback pad.
ALJIA0882ZZ
Нет комментариевНе стесняйтесь поделиться с нами вашим ценным мнением.
Текст