Nissan Pathfinder. Manual — part 975
COMPONENT PARTS
RF-5
< SYSTEM DESCRIPTION >
C
D
E
F
G
H
I
J
L
M
A
B
RF
N
O
P
SYSTEM DESCRIPTION
COMPONENT PARTS
MOONROOF
MOONROOF : Component Parts Location
INFOID:0000000009176273
MOONROOF : Component Description
INFOID:0000000009176274
AWKIA2054ZZ
1.
BCM
(view with combination meter removed)
2.
Moonroof switch
3.
Moonroof motor assembly (view with
headliner removed)
4.
Front door lock assembly LH (key
cylinder switch)
5.
Front door switch LH (RH similar)
6.
Combination meter
Component
Function
BCM
Supplies the power supply to moonroof motor assembly.
Moonroof switch
Transmits tilt up/down & slides open/close operation signal to moonroof motor assembly.
Moonroof motor assembly
The moonroof motor and CPU are integrated into one unit that enables tilt up/down & slide open/
close by moonroof switch operation.
RF-6
< SYSTEM DESCRIPTION >
COMPONENT PARTS
SUNSHADE
SUNSHADE : Component Parts Location
INFOID:0000000009176275
SUNSHADE : Component Description
INFOID:0000000009176276
Front door switch
Detects door open/close condition and transmits to BCM.
Combination meter
Transmits vehicle speed signal to moonroof motor assembly.
Component
Function
1.
BCM
(view with combination meter removed)
2.
Sunshade switch
3.
Sunshade motor assembly
(view with headliner removed)
4.
Front door lock assembly LH (key cylin-
der switch)
5.
Front door switch LH (RH similar)
AWKIA2055ZZ
Component
Function
BCM
Supplies power to the sunshade motor assembly.
Sunshade motor assembly
The sunshade motor is activated with a signal from the sunshade switch.
COMPONENT PARTS
RF-7
< SYSTEM DESCRIPTION >
C
D
E
F
G
H
I
J
L
M
A
B
RF
N
O
P
Sunshade switch
Transmits switch operation signal to the sunshade motor assembly.
Front door switches
Detects door open/close condition and transmits to BCM.
Component
Function
RF-8
< SYSTEM DESCRIPTION >
SYSTEM
SYSTEM
MOONROOF
MOONROOF : System Diagram
INFOID:0000000009176277
MOONROOF
MOONROOF : System Description
INFOID:0000000009176278
MOONROOF SYSTEM
INPUT/OUTPUT SIGNAL CHART
MOONROOF OPERATION
• Moonroof motor assembly operates with the power supply that is output from BCM while ignition switch is
ON or retained power is operating.
• Tilt up/down & slide open/close signals from moonroof switch enable the moonroof motor to move.
• Moonroof motor assembly receives a vehicle speed signal from combination meter and controls the moon-
roof motor torque of tilt down at the time of high speed operation.
AUTO OPERATION
Moonroof AUTO feature makes it possible to slide open and slide closed or tilt up and tilt down the moonroof
without holding the moonroof switch in the slide open/tilt down or slide close/tilt up position.
RETAINED POWER OPERATION
• Retained power operation is an additional power supply function that enables the moonroof system to oper-
ate for 45 seconds after the ignition switch is turned off and the front doors remain closed.
Retained power function cancel conditions
AWKIA1975GB
Item
Input signal to moonroof motor assem-
bly
Moonroof motor function
Actuator
Moonroof switch
Moonroof switch signal (tilt down or
slide open)
Receives signal and moves
the moonroof assembly to the
correct position.
Moonroof motor
Moonroof switch signal (tilt up or slide
close)
Combination meter
Vehicle speed signal
Receives speed signal and de-
termines the amount of torque
the motor requires.
BCM
RAP signal
Retained power after the key is
turned off and the front doors
stay closed.
Нет комментариевНе стесняйтесь поделиться с нами вашим ценным мнением.
Текст