Nissan Pathfinder. Manual — part 135
AV
A/C AND AV SWITCH ASSEMBLY
AV-367
< REMOVAL AND INSTALLATION >
[MID AUDIO WITH BOSE]
C
D
E
F
G
H
I
J
K
L
M
B
A
O
P
A/C AND AV SWITCH ASSEMBLY
Removal and Installation
INFOID:0000000009763203
REMOVAL
1. Remove cluster lid C lower. Refer to
IP-22, "CLUSTER LID C LOWER : Removal and Installation"
2. Remove the A/C and AV switch assembly lower screws.
3. Release upper pawls and remove A/C and AV switch assembly.
INSTALLATION
Installation is in the reverse order of removal.
AV-368
< REMOVAL AND INSTALLATION >
[MID AUDIO WITH BOSE]
STEERING SWITCH
STEERING SWITCH
Exploded View
INFOID:0000000009174622
Removal and Installation
INFOID:0000000009174623
REMOVAL
NOTE:
The steering switches are serviced as an assembly.
1. Remove steering wheel. Refer to
ST-44, "Removal and Installation"
.
2. Release pawls and remove steering wheel rear finisher (1) from
steering wheel (2).
3. Remove steering switches screws.
4. Remove steering switches (1) from steering wheel (2).
INSTALLATION
Installation is in the reverse order of removal.
1.
Steering switches
2.
Steering wheel
3.
Steering wheel rear finisher
ALOIA0025ZZ
ALOIA0026ZZ
ALOIA0027ZZ
AV
DISPLAY UNIT
AV-369
< REMOVAL AND INSTALLATION >
[MID AUDIO WITH BOSE]
C
D
E
F
G
H
I
J
K
L
M
B
A
O
P
DISPLAY UNIT
Exploded View
INFOID:0000000009763205
Removal and Installation
INFOID:0000000009763204
REMOVAL
1. Remove cluster lid D. Refer to
IP-24, "Removal and Installation"
2. Remove the display unit screws, then pull out the display unit and bracket.
3. Disconnect the harness connector from the display unit and remove.
4. Remove the display unit bracket screws and the display unit from the display unit bracket (if necessary).
INSTALLATION
Installation is in the reverse order of removal.
1.
Display unit
2.
Display unit bracket
A. Display unit bracket screws
ALNIA1430ZZ
AV-370
< REMOVAL AND INSTALLATION >
[MID AUDIO WITH BOSE]
HEADREST DISPLAY UNIT
HEADREST DISPLAY UNIT
Removal and Installation
INFOID:0000000009174626
REMOVAL
CAUTION:
• Do not press on the panel surface of display (glass area).
• Do not press or pull out the movable part of display.
1. Remove the headrest trim retainer (A).
2. Remove the headrest display harness and upper tube screws
(A), then remove headrest display unit bolts (B).
3. Remove the headrest display escutcheon and headrest display.
a. Insert a suitable tool (A) between lower side of headrest display
escutcheon (1) and headrest trim (2) and pull out lower side of
escutcheon.
b. Pull out headrest display escutcheon (1) to the position that pawl
is visible and disengage pawl.
: Pawl
c.
Pull out lower side of headrest display escutcheon from headrest.
JMJIA4069ZZ
JMJIA4070ZZ
JMJIA4071ZZ
AWNIA2554ZZ
Нет комментариевНе стесняйтесь поделиться с нами вашим ценным мнением.
Текст