Nissan Pathfinder. Manual — part 136
AV
HEADREST DISPLAY UNIT
AV-371
< REMOVAL AND INSTALLATION >
[MID AUDIO WITH BOSE]
C
D
E
F
G
H
I
J
K
L
M
B
A
O
P
CAUTION:
Be careful not to damage pawls on upper side headrest display escutcheon.
d. Pull downward and remove headrest display escutcheon (1) and
headrest display unit (2) by pulling them out and removing pins
on upper side of display.
e. Disconnect inner harness connector.
f.
Press headrest display escutcheon to the headrest display unit side. Disconnect pawls on upper side and
remove headrest display escutcheon.
4. Remove the headrest display harness upper tube from headrest trim.
INSTALLATION
Installation is in the reverse order of removal.
JMJIA4233ZZ
AV-372
< REMOVAL AND INSTALLATION >
[MID AUDIO WITH BOSE]
BOSE SPEAKER AMP
BOSE SPEAKER AMP
Removal and Installation
INFOID:0000000009174627
REMOVAL
1. Disconnect the negative battery terminal. Refer to
PG-90, "Removal and Installation"
2. Remove third row seat. Refer to
SE-107, "Removal and Installation"
3. Remove Bose speaker amp screws (A).
4. Disconnect the harness connectors (B) from the Bose speaker
amp. and remove.
INSTALLATION
Installation is in the reverse order of removal.
ALNIA0918ZZ
AV
FRONT DOOR SPEAKER
AV-373
< REMOVAL AND INSTALLATION >
[MID AUDIO WITH BOSE]
C
D
E
F
G
H
I
J
K
L
M
B
A
O
P
FRONT DOOR SPEAKER
Exploded View
INFOID:0000000009763207
Removal and Installation
INFOID:0000000009763206
REMOVAL
1. Remove the front door finisher. Refer to
INT-15, "Removal and Installation"
2. Remove the front door speaker bolts.
3. Pull out the front door speaker from the speaker bracket.
4. Disconnect the harness connector from front door speaker and remove.
5. Remove the speaker bracket bolts and the speaker bracket from front door (if necessary).
INSTALLATION
Installation is in the reverse order of removal.
ALNIA1329ZZ
1. Speaker bracket bolt
2. Front door speaker
3. Speaker bolt
4. Speaker bracket
AV-374
< REMOVAL AND INSTALLATION >
[MID AUDIO WITH BOSE]
FRONT TWEETER
FRONT TWEETER
Removal and Installation
INFOID:0000000009174630
REMOVAL
1. Remove the front pillar finisher (1). Refer to
PILLAR FINISHER : Removal and Installation"
2. Remove the two screws and the front tweeter (2).
INSTALLATION
Installation is in the reverse order of removal.
JSNIA3786ZZ
Нет комментариевНе стесняйтесь поделиться с нами вашим ценным мнением.
Текст