Nissan Pathfinder. Manual — part 614
EXL-144
< REMOVAL AND INSTALLATION >
FRONT FOG LAMP
FRONT FOG LAMP
Exploded View
INFOID:0000000009175405
Removal and Installation
INFOID:0000000009175406
FRONT FOG LAMP
Removal
1. Partially remove the fender protector. Refer to
EXT-28, "FENDER PROTECTOR : Removal and Installa-
2. Disconnect the harness connector(s) from the front fog lamp and daytime running lamp (if equipped).
3. Remove bolts and front fog lamp.
Installation
Installation in the reverse order of removal.
CAUTION:
After installation, perform fog lamp aiming adjustment. Refer to
.
FRONT FOG LAMP BULB
WARNING:
Do not touch bulb by hand while it is lit or right after being turned off. Burning may result.
CAUTION:
• Do not touch glass surface of the bulb with bare hands or allow oil or grease to get on it to prevent
damage to bulb.
• Do not leave the bulb out of the lamp reflector for a long time because dust, moisture, smoke, etc.
may affect the performance of the lamp.
Removal
1. Partially remove the front fender protector. Refer to
EXT-28, "FENDER PROTECTOR : Removal and
.
1.
Front bumper fascia
2.
Front fog lamp bracket (LH)
3. Front fog lamp (LH/RH)
4.
Front fog lamp bulb
5.
Front fog lamp bracket (RH)
A. Bolts
ALLIA1252ZZ
FRONT FOG LAMP
EXL-145
< REMOVAL AND INSTALLATION >
C
D
E
F
G
H
I
J
K
M
A
B
EXL
N
O
P
2. Disconnect the harness connector (A) from the front fog lamp.
3. Rotate bulb (1) counterclockwise and remove.
Installation
Installation is in the reverse order of removal.
DAYTIME LAMP BULB (CANADA ONLY)
WARNING:
Do not touch bulb by hand while it is lit or right after being turned off. Burning may result.
CAUTION:
• Do not touch glass surface of the bulb with bare hands or allow oil or grease to get on it to prevent
damage to bulb.
• Do not leave the bulb out of the lamp reflector for a long time because dust, moisture, smoke, etc.
may affect the performance of the lamp.
Removal
1. Partially remove the front fender protector. Refer to
EXT-28, "FENDER PROTECTOR : Removal and
.
2. Disconnect the harness connector (A) from the daytime lamp
bulb (1).
3. Rotate bulb (1) counterclockwise and remove.
Installation
Installation is in the reverse order of removal.
AWLIA2050ZZ
AWLIA2050ZZ
EXL-146
< REMOVAL AND INSTALLATION >
OPTICAL SENSOR
OPTICAL SENSOR
Exploded View
INFOID:0000000009175407
Removal and Installation
INFOID:0000000009175408
REMOVAL
1. Remove the instrument panel tweeter grille (RH) using a suitable tool.
2. Disconnect the harness connector from the optical sensor.
3. Release pawls and remove the optical sensor from the instrument panel tweeter grille (RH).
INSTALLATION
Installation is in the reverse order of removal.
1.
Optical sensor
2.
Instrument panel tweeter grille (RH) 3.
Optical sensor harness connec-
tor
4.
Instrument panel tweeter (RH) 5.
Instrument panel
ALLIA0900ZZ
LIGHTING & TURN SIGNAL SWITCH
EXL-147
< REMOVAL AND INSTALLATION >
C
D
E
F
G
H
I
J
K
M
A
B
EXL
N
O
P
LIGHTING & TURN SIGNAL SWITCH
Removal and Installation
INFOID:0000000009175409
The lighting and turn signal switch is integrated into the combination switch and is replaced as an assembly.
Нет комментариевНе стесняйтесь поделиться с нами вашим ценным мнением.
Текст