Nissan Pathfinder. Manual — part 615
EXL-148
< REMOVAL AND INSTALLATION >
HAZARD SWITCH
HAZARD SWITCH
Removal and Installation
INFOID:0000000009175410
REMOVAL
1. Remove cluster lid C. Refer to
IP-22, "CLUSTER LID C : Removal and Installation"
2. Release the pawls (A) and remove the hazard switch (1) from
cluster lid C (2).
:Pawl
INSTALLATION
Installation is in the reverse order of removal.
ALLIA1191ZZ
REAR COMBINATION LAMP
EXL-149
< REMOVAL AND INSTALLATION >
C
D
E
F
G
H
I
J
K
M
A
B
EXL
N
O
P
REAR COMBINATION LAMP
Exploded View
INFOID:0000000009175411
Removal and Installation
INFOID:0000000009175412
REAR COMBINATION LAMP
Removal
1. Release clips using a suitable tool and remove rear combination lamp bolt cover.
2. Remove rear combination lamp bolts.
3. Pull rear combination lamp rearward.
4. Disconnect the harness connector from the rear combination lamp and remove.
Installation
Installation is in the reverse order of removal.
REAR TURN SIGNAL LAMP BULB
WARNING:
Do not touch bulb by hand while it is lit or right after being turned OFF. Burning may result.
CAUTION:
• Do not touch glass surface of the bulb with bare hands or allow oil or grease to get on it to prevent
damage to bulb.
• Do not leave the bulb out of the lamp reflector for a long time because dust, moisture, smoke, etc.
may affect the performance of the lamp.
Removal
1. Remove the rear combination lamp. Refer to
EXL-149, "Removal and Installation"
2. Rotate the rear turn signal lamp socket counterclockwise and remove.
3. Remove the bulb from rear turn signal bulb socket.
Installation
Installation is in the reverse order of removal.
STOP/TAIL LAMP BULB
WARNING:
Do not touch bulb by hand while it is lit or right after being turned OFF. Burning may result.
CAUTION:
• Do not touch glass surface of the bulb with bare hands or allow oil or grease to get on it to prevent
damage to bulb.
1.
Rear combination lamp
2.
Rear combination lamp bolt cover
A. Bolt
AWLIA2031ZZ
EXL-150
< REMOVAL AND INSTALLATION >
REAR COMBINATION LAMP
• Do not leave the bulb out of the lamp reflector for a long time because dust, moisture, smoke, etc.
may affect the performance of the lamp.
Removal
1. Remove the rear combination lamp. Refer to
EXL-149, "Removal and Installation"
2. Rotate the stop/tail lamp socket counterclockwise and remove.
3. Remove the bulb from stop/tail lamp bulb socket.
Installation
Installation is in the reverse order of removal.
SIDE MARKER LAMP BULB
WARNING:
Do not touch bulb by hand while it is lit or right after being turned OFF. Burning may result.
CAUTION:
• Do not touch glass surface of the bulb with bare hands or allow oil or grease to get on it to prevent
damage to bulb.
• Do not leave the bulb out of the lamp reflector for a long time because dust, moisture, smoke, etc.
may affect the performance of the lamp.
Removal
1. Remove the rear combination lamp. Refer to
EXL-149, "Removal and Installation"
2. Rotate the side marker lamp socket counterclockwise and remove.
3. Remove the bulb from side marker bulb socket.
Installation
Installation is in the reverse order of removal.
HIGH-MOUNTED STOP LAMP
EXL-151
< REMOVAL AND INSTALLATION >
C
D
E
F
G
H
I
J
K
M
A
B
EXL
N
O
P
HIGH-MOUNTED STOP LAMP
Removal and Installation
INFOID:0000000009175413
REMOVAL
1. Remove rear spoiler. Refer to
EXT-41, "Removal and Installation"
.
INSTALLATION
Installation is in the reverse order of removal.
HIGH-MOUNTED STOP LAMP BULB
The high-mounted stop lamp bulb is LED and is serviced as part of the high-mounted stop lamp. Refer to
Нет комментариевНе стесняйтесь поделиться с нами вашим ценным мнением.
Текст