Nissan Pathfinder. Manual — part 616
EXL-152
< REMOVAL AND INSTALLATION >
BACK-UP LAMP
BACK-UP LAMP
Exploded View
INFOID:0000000009175414
Removal and Installation
INFOID:0000000009175415
BACK-UP LAMP
Removal
1. Remove back door lower finisher. Refer to
INT-35, "BACK DOOR LOWER FINISHER : Removal and
.
2. Disconnect the harness connector from the back-up lamp.
3. Remove back-up lamp nuts and remove.
Installation
Installation is in the reverse order of removal.
BACK-UP LAMP BULB
WARNING:
Do not touch bulb by hand while it is lit or right after being turned off. Burning may result.
CAUTION:
• Do not touch glass surface of the bulb with bare hands or allow oil or grease to get on it to prevent
damage to bulb.
• Do not leave the bulb out of the lamp reflector for a long time because dust, moisture, smoke, etc.
may affect the performance of the lamp.
Removal
1. Remove back door trim access panel.
2. Rotate back-up lamp socket counterclockwise and remove.
3. Remove back-up lamp bulb from bulb socket.
Installation
Installation is in the reverse order of removal.
1.
Back-up lamp
A. Nut
Stud
AWLIA2194ZZ
LICENSE PLATE LAMP
EXL-153
< REMOVAL AND INSTALLATION >
C
D
E
F
G
H
I
J
K
M
A
B
EXL
N
O
P
LICENSE PLATE LAMP
Exploded View
INFOID:0000000009175416
Removal and Installation
INFOID:0000000009175417
LICENSE PLATE LAMP
Removal
1. Remove back door outer finisher. Refer to
EXT-43, "Removal and Installation"
2. Release pawls using a suitable tool and remove license plate lamp.
Installation
Installation is in the reverse order of removal.
LICENSE PLATE LAMP BULB
Removal
WARNING:
Do not touch bulb by hand while it is lit or right after being turned off. Burning may result.
CAUTION:
• Do not touch glass surface of the bulb with bare hands or allow oil or grease to get on it to prevent
damage to bulb.
• Do not leave the bulb out of the lamp reflector for a long time because dust, moisture, smoke, etc.
may affect the performance of the lamp.
1. Remove back door lower finisher. Refer to
INT-35, "BACK DOOR LOWER FINISHER : Removal and
.
2. Disconnect the harness connector from the license plate lamp.
1.
License plate lamp harness
2.
License plate lamp socket
3.
License plate lamp bulb
4.
License plate lamp gasket
5.
License plate lamp
AWLIA2195ZZ
EXL-154
< REMOVAL AND INSTALLATION >
LICENSE PLATE LAMP
3. Rotate license plate lamp socket (1) counterclockwise and
remove.
4. Remove license plate lamp bulb (2) from bulb socket.
Installation
Installation is in the reverse order of removal.
JPLIA0930ZZ
FRONT COMBINATION LAMP
EXL-155
< UNIT DISASSEMBLY AND ASSEMBLY >
C
D
E
F
G
H
I
J
K
M
A
B
EXL
N
O
P
UNIT DISASSEMBLY AND ASSEMBLY
FRONT COMBINATION LAMP
Exploded View
INFOID:0000000009175418
Disassembly and Assembly
INFOID:0000000009175419
WARNING:
Do not touch bulb by hand while it is lit or right after being turned off. Burning may result.
CAUTION:
• Do not touch glass surface of the bulb with bare hands or allow oil or grease to get on it to prevent
damage to bulb.
• Do not leave the bulb out of the lamp reflector for a long time because dust, moisture, smoke, etc.
may affect the performance of the lamp.
DISASSEMBLY
1. Remove the front combination lamp. Refer to
EXL-141, "Removal and Installation"
.
2. Rotate the halogen lamp bulb (low beam) counterclockwise and remove.
3. Rotate the halogen lamp bulb (high beam) counterclockwise and remove.
4. Rotate parking lamp socket counterclockwise and remove.
5. Remove parking lamp bulb from parking bulb socket.
6. Rotate front turn signal lamp socket counterclockwise and remove.
7. Remove front turn signal lamp bulb from front turn signal bulb socket.
8. Rotate side marker lamp socket counterclockwise and remove.
9. Remove side marker lamp bulb from side marker bulb socket.
ASSEMBLY
Assembly is in the reverse order of disassembly.
1.
Front combination lamp
2. Side marker lamp bulb
3. Side marker bulb socket
4.
Halogen lamp bulb (low beam)
5. Halogen lamp bulb (high beam) 6. Front turn signal lamp bulb
7.
Parking lamp bulb socket
8. Parking lamp bulb
9. Front turn signal bulb socket
10. Front combination lamp assembly
ALLIA1192ZZ
Нет комментариевНе стесняйтесь поделиться с нами вашим ценным мнением.
Текст