Nissan X-Trail 32. Manual — part 646
BACK DOOR LOCK
DLK-925
< REMOVAL AND INSTALLATION >
[TYPE 4]
C
D
E
F
G
H
I
J
L
M
A
B
DLK
N
O
P
3.
Check door lock assembly for poor lubrication. Apply body
grease to door lock if necessary.
DOOR LOCK : Unlock procedures
INFOID:0000000010728713
UNLOCK PROCEDURES
NOTE:
Release lock according to the following procedures when lock cannot be unlocked due to a malfunction of
door lock assembly or battery discharge.
Insert a screwdriver, etc. into tool insertion hole
of back door inner finisher
, and then back door lock is
unlocked by operating opener lever
in the direction of arrow as shown in the figure.
: Body grease
JMKIB1220ZZ
: Vehicle front
JMKIB3162ZZ
DLK-926
< REMOVAL AND INSTALLATION >
[TYPE 4]
FUEL FILLER LID OPENER
FUEL FILLER LID OPENER
Exploded View
INFOID:0000000010728679
Fuel filler lid opener cable
Cable protector
Fuel filler lid lock assembly
Bumper rubber
Fuel filler lid assembly
Spring
: Clip
: Pawl
: Always replace after every disassembly.
JMKIB3488ZZ
FUEL FILLER LID OPENER
DLK-927
< REMOVAL AND INSTALLATION >
[TYPE 4]
C
D
E
F
G
H
I
J
L
M
A
B
DLK
N
O
P
FUEL FILLER LID
FUEL FILLER LID : Removal and Installation
INFOID:0000000010728680
REMOVAL
1.
Fully open fuel filler lid.
2.
Remove fuel mounting pin
.
3.
Remove mounting bolts, and then remove fuel filler lid assembly.
INSTALLATION
Note the following items, and then install in the reverse order of removal.
CAUTION:
• After installation, apply the touch-up paint (the body color) onto the head of the mounting screws.
• After installation, check fuel filler lid assembly open/close, lock/unlock operation.
NOTE:
• The following table shows the specified values for checking normal installation status.
• Fitting adjustment cannot be performed.
Unit: mm [in]
FUEL FILLER LID LOCK
FUEL FILLER LID LOCK : Removal and Installation
INFOID:0000000010728681
REMOVAL
1.
Fully open fuel filler lid.
2.
Remove luggage side lower finisher RH. Refer to
INT-43, "LUGGAGE SIDE LOWER FINISHER :
.
3.
Rotate fuel filler lid lock assembly to disengage pawls and
remove fuel filler lid lock assembly according to the numerical
order 1
→
2 indicated by arrows as shown in the figure.
NOTE:
Operation is performed easily when rotating fuel filler lid lock
from passenger room side.
JMKIB3183ZZ
Clearance
Evenness
Fuel filler lid – Body side outer
2.5 – 4.5
[0.098 – 0.177]
(
−
1.0) – (+1.0)
[(
−
0.039) – (+0.039)]
: Pawl
: Vehicle front
JMKIB1094ZZ
DLK-928
< REMOVAL AND INSTALLATION >
[TYPE 4]
FUEL FILLER LID OPENER
4.
Disengage fuel filler lid opener cable
and remove fuel filler lid
opener cable while pressing stopper pin
according to the
numerical order 1
→
4 indicated by arrows as shown in the figure.
INSTALLATION
Note the following item, and then install in the reverse order of removal.
CAUTION:
After installation, check fuel filler lid assembly open/close, lock/unlock operation.
FUEL FILLER OPENER CABLE
FUEL FILLER OPENER CABLE : Removal and Installation
INFOID:0000000010728682
REMOVAL
1.
Remove hood lock control handle mounting bolts, and then hood lock control handle. Refer to
"HOOD LOCK CONTROL HANDLE : Removal and Installation"
.
2.
Remove fuel filler lid opener cable
from fuel filler lid opener
lever
according to the numerical order 1
→
2 indicated by
arrows as shown in the figure.
3.
Remove kicking plate inner LH and rear kicking plate inner (LH and RH). Refer to
PLATE : Removal and Installation"
4.
Remove dash side finisher LH. Refer to
INT-26, "DASH SIDE FINISHER : Removal and Installation"
.
5.
Remove center pillar lower garnish LH. Refer to
INT-27, "CENTER PILLAR LOWER GARNISH : Removal
6.
Remove luggage side lower finisher RH. Refer to
INT-43, "LUGGAGE SIDE LOWER FINISHER :
.
7.
Remove fuel filler lid opener cable from fuel filler lid lock assembly. Refer to
LOCK : Removal and Installation"
.
8.
Remove fuel filler lid opener cable from harness protectors.
9.
Remove fuel filler lid opener cable fixing clips, and then remove fuel filler lid opener cable.
INSTALLATION
Note the following item, and then install in the reverse order of removal.
CAUTION:
After installation, check fuel filler lid assembly open/close, lock/unlock operation.
JMKIA5719ZZ
JMKIA5901ZZ
Нет комментариевНе стесняйтесь поделиться с нами вашим ценным мнением.
Текст