Nissan X-Trail 32. Manual — part 572
OUTSIDE KEY ANTENNA
DLK-629
< REMOVAL AND INSTALLATION >
[TYPE 2]
C
D
E
F
G
H
I
J
L
M
A
B
DLK
N
O
P
OUTSIDE KEY ANTENNA
FRONT DOOR
FRONT DOOR : Removal and Installation
INFOID:0000000010717719
REMOVAL
Remove outside handle grip. Refer to
DLK-612, "OUTSIDE HANDLE : Removal and Installation"
INSTALLATION
Install in the reverse order of removal.
REAR BUMPER
REAR BUMPER : Removal and Installation
INFOID:0000000010717720
REMOVAL
1.
Remove rear bumper fascia. Refer to
EXT-18, "Removal and Installation"
2.
Disconnect outside key antenna (rear bumper) harness connector.
3.
Remove the outside key antenna (rear bumper) mounting clip
,
and then remove outside key antenna (rear bumper)
.
INSTALLATION
Install in the reverse order of removal.
JMKIB2757ZZ
DLK-630
< REMOVAL AND INSTALLATION >
[TYPE 2]
INTELLIGENT KEY WARNING BUZZER
INTELLIGENT KEY WARNING BUZZER
Removal and Installation
INFOID:0000000010717721
REMOVAL
1.
Remove front bumper fascia. Refer to
EXT-15, "Removal and Installation"
.
2.
Disconnect Intelligent Key warning buzzer harness connector.
3.
Remove Intelligent Key warning buzzer mounting bolt
, and
then remove Intelligent Key warning buzzer
.
INSTALLATION
Install in the reverse order of removal.
JMKIB2758ZZ
INTELLIGENT KEY BATTERY
DLK-631
< REMOVAL AND INSTALLATION >
[TYPE 2]
C
D
E
F
G
H
I
J
L
M
A
B
DLK
N
O
P
INTELLIGENT KEY BATTERY
Removal and Installation
INFOID:0000000010717722
1.
Release the lock knob at the back of the Intelligent Key and remove the mechanical key.
2.
Insert remover tool (A) wrapped with a cloth into the slit of the
corner and twist it to separate the upper part from the lower part.
CAUTION:
• Never touch the circuit board or battery terminal.
• The key fob is water-resistant. However, if it does get wet,
immediately wipe it dry.
3.
Replace the battery with new one.
4.
Align the tips of the upper and lower parts, and then push them
together until it is securely closed.
CAUTION:
• When replacing battery, keep dirt, grease, and other for-
eign materials off the electrode contact area.
• After replacing the battery, check that all Intelligent Key
functions work normally.
PIIB6221E
Battery replacement
:Coin-type lithium battery
(CR2032)
PIIB6222E
DLK-632
< REMOVAL AND INSTALLATION >
[TYPE 2]
BACK DOOR OPENER SWITCH ASSEMBLY
BACK DOOR OPENER SWITCH ASSEMBLY
Removal and Installation
INFOID:0000000010717723
REMOVAL
1.
Remove back door inner finisher. Refer to
INT-47, "Removal and Installation"
2.
Remove back door lock assembly. Refer to
DLK-619, "DOOR LOCK : Removal and Installation"
.
3.
Disconnect back door opener switch assembly harness connector.
4.
Remove switch cover mounting screw
.
5.
Remove grommet
, and then remove switch cover
.
6.
Press toward outside (in the direction shown by arrow) and then
remove back door opener switch assembly
.
INSTALLATION
Install in the reverse order of removal.
JMKIB2751ZZ
JMKIB2752ZZ
JMKIB2753ZZ
Нет комментариевНе стесняйтесь поделиться с нами вашим ценным мнением.
Текст