Nissan X-Trail 32. Manual — part 573
AUTOMATIC BACK DOOR CONTROL UNIT
DLK-633
< REMOVAL AND INSTALLATION >
[TYPE 2]
C
D
E
F
G
H
I
J
L
M
A
B
DLK
N
O
P
AUTOMATIC BACK DOOR CONTROL UNIT
Removal and Installation
INFOID:0000000010717724
REMOVAL
1.
For 3 seat row models: Remove third seat. Refer to
SE-70, "Removal and Installation"
2.
Remove luggage side lower finisher LH. Refer to
INT-43, "LUGGAGE SIDE LOWER FINISHER :
.
3.
Disconnect automatic back door control unit harness connector.
4.
Remove the automatic back door control unit mounting bolt
,
and then remove the automatic back door control unit
.
INSTALLATION
Install in the reverse order of removal.
NOTE:
After installing automatic back door control unit, perform additional service when replace control unit. Refer to
.
JMKIB2759ZZ
DLK-634
< REMOVAL AND INSTALLATION >
[TYPE 2]
AUTOMATIC BACK DOOR MAIN SWITCH
AUTOMATIC BACK DOOR MAIN SWITCH
Removal and Installation
INFOID:0000000010717725
REMOVAL
1.
Remove the instrument lower panel LH. Refer to
IP-14, "Removal and Installation"
.
2.
Remove screws
and then remove the switch bracket
from
the instrument lower panel LH
.
3.
Remove automatic back door main switch
from the switch
bracket.
INSTALLATION
Install in the reverse order of removal.
JMKIB3603ZZ
: Pawl
JMKIB3604ZZ
AUTOMATIC BACK DOOR SWITCH
DLK-635
< REMOVAL AND INSTALLATION >
[TYPE 2]
C
D
E
F
G
H
I
J
L
M
A
B
DLK
N
O
P
AUTOMATIC BACK DOOR SWITCH
Removal and Installation
INFOID:0000000010717726
REMOVAL
1.
Remove the instrument lower panel LH. Refer to
IP-14, "Removal and Installation"
.
2.
Remove screws
and then remove the switch bracket
from
the instrument lower panel LH
.
3.
Remove automatic back door switch
from the switch bracket.
INSTALLATION
Install in the reverse order of removal.
JMKIB3603ZZ
: Pawl
JMKIB3605ZZ
DLK-636
< REMOVAL AND INSTALLATION >
[TYPE 2]
AUTOMATIC BACK DOOR CLOSE SWITCH
AUTOMATIC BACK DOOR CLOSE SWITCH
Removal and Installation
INFOID:0000000010717727
REMOVAL
1.
Remove automatic back door close switch and switch finisher
using a remover tool.
CAUTION:
Apply protective tape on the part to protect it from damage.
2.
Disconnect automatic back door close switch harness connector.
3.
Remove automatic back door close switch
from automatic
back door close switch finisher
using flat-bladed screwdriver
(A).
INSTALLATION
Install in the reverse order of removal.
JMKIB2761ZZ
: Pawl
JMKIA6045ZZ
Нет комментариевНе стесняйтесь поделиться с нами вашим ценным мнением.
Текст