Nissan X-Trail 32. Manual — part 1955
SR-34
< REMOVAL AND INSTALLATION >
SATELLITE SENSOR
• To prevent damage to the parts, never impact the satellite
sensor.
• Replace the satellite sensor if it is dropped or sustains an
impact.
• Replace the satellite sensor of deployed side air bag module and deployed curtain air bag mod-
ule.
C-pillar Satellite Sensor
1.
Remove luggage side lower finisher. Refer to
INT-43, "LUGGAGE SIDE LOWER FINISHER : Removal
2.
Remove C-pillar satellite sensor mounting nuts.
3.
Disconnect the C-pillar satellite sensor harness connector and then remove the C-pillar satellite sensor.
CAUTION:
• To prevent damage to the parts, never impact the satellite
sensor.
• Replace the satellite sensor if it is dropped or sustains an
impact.
• Replace the satellite sensor of deployed side air bag module, deployed curtain air bag module.
INSTALLATION
Note the following items, and then install in the reverse order of removal.
CAUTION:
• Never reuse mounting nut after removal, replace with the new nut.
• Always install normally aligning to the cutout hole, because performance of the satellite sensor
excessively fluctuates according to the installation position.
• After installation is complete, perform self-diagnosis using CONSULT or air bag warning lamp, if the
system is normal and
″
PAST
″
of
″
Self Diagnostic Result
″
is indicated, always perform
″
ERASE
″
of
″
Self Diagnostic Result
″
using CONSULT. Refer to
.
• After the work is completed, check that no system malfunction is detected by air bag warning lamp.
JMHIA0009ZZ
JMHIA0009ZZ
AIR BAG CUTOFF SWITCH
SR-35
< REMOVAL AND INSTALLATION >
C
D
E
F
G
I
J
K
L
M
A
B
SR
N
O
P
AIR BAG CUTOFF SWITCH
Exploded View
INFOID:0000000010927758
(LHD models) or
(RHD models).
Removal and Installation
INFOID:0000000010927759
REMOVAL
1.
Remove glove box assembly. Refer to
IP-14, "Removal and Installation"
(LHD models) or
(RHD models).
2.
Disangage fixing pawls, and then remove air bag cutoff swich.
INSTALLATION
Install in the reverse order of removal.
: Pawl
JMHIA2942ZZ
SR-36
< REMOVAL AND INSTALLATION >
SEAT BELT PRE-TENSIONER
SEAT BELT PRE-TENSIONER
Exploded View
INFOID:0000000010927738
Removal and Installation
INFOID:0000000010927739
LAP PRE-TENSIONER
SR-37
< REMOVAL AND INSTALLATION >
C
D
E
F
G
I
J
K
L
M
A
B
SR
N
O
P
LAP PRE-TENSIONER
Exploded View
INFOID:0000000010927740
Removal and Installation
INFOID:0000000010927741
Нет комментариевНе стесняйтесь поделиться с нами вашим ценным мнением.
Текст