Nissan X-Trail 32. Manual — part 1956
SR-38
< REMOVAL AND INSTALLATION >
DIAGNOSIS SENSOR UNIT
DIAGNOSIS SENSOR UNIT
Exploded View
INFOID:0000000010927742
Removal and Installation
INFOID:0000000010927743
WARNING:
Always observe the following items for preventing accidental activation.
• Before servicing, turn ignition switch OFF, disconnect battery negative terminal and wait for 3 min-
utes or more (discharges electricity held in the additional power supply circuit of the air bag diagno-
sis sensor unit).
• Before disconnecting the air bag sensor unit harness connector, be sure to disconnect each har-
ness connector of the air bag modules, seat belt pre-tensioners and lap pre-tensioner to prevent air
bag deployment by static electricity and seat belt pre-tensioner operation.
• Never use air tools or electric tools for servicing (prevents the air bag diagnosis sensor unit from
activating unexpectedly due to vibration).
REMOVAL
NOTE:
Before replacing air bag diagnosis sensor unit, perform “Before Replace ECU” of “Read / Write Configuration”
to save or print current vehicle specification. Refer to
.
1.
Disconnect the connector of all air bag modules, seat belt pre-tensioners and lap pre-tensioner.
2.
Remove center console assembly.
• LHD models: Refer to
IP-25, "Removal and Installation"
.
• RHD models: Refer to
IP-52, "Removal and Installation"
3.
Disconnect air bag diagnosis sensor unit harness connectors.
4.
Remove air bag diagnosis sensor unit mounting bolt, nuts, and then remove air bag diagnosis sensor unit.
Harness clip bracket
: Always replace after every disassembly.
: N·m (kg-m, ft-lb)
JMHIA2884GB
DIAGNOSIS SENSOR UNIT
SR-39
< REMOVAL AND INSTALLATION >
C
D
E
F
G
I
J
K
L
M
A
B
SR
N
O
P
CAUTION:
• To prevent damage to the air bag diagnosis sensor unit, never
impact it
• Replace the diagnosis sensor unit if it is dropped or sustains
an impact.
• Replace the diagnosis sensor unit of deployed driver air bag module, deployed passenger air bag
module, deployed side air bag module, deployed curtain air bag module, deployed seat belt pre-ten-
sioner or deployed lap pre-tensioner.
INSTALLATION
Note the following items, and then install in the reverse order of removal.
CAUTION:
• Never reuse mounting bolts after removal, replace with new bolts.
• Never damage the harness while installing.
• Be sure to perform “After Replace ECU” of “Read / Write Configuration” or “Manual Configuration”
when replacing air bag diagnosis sensor unit. Refer to
• After installation is complete, perform self-diagnosis using CONSULT or air bag warning lamp, if the
system is normal and
″
PAST
″
of
″
Self Diagnostic Result
″
is indicated, always perform
″
ERASE
″
of
″
Self Diagnostic Result
″
using CONSULT. Refer to
.
• After the work is completed, check that no system malfunction is detected by air bag warning lamp.
JMHIA0009ZZ
SR-40
< REMOVAL AND INSTALLATION >
DISPOSAL OF AIR BAG MODULE
DISPOSAL OF AIR BAG MODULE
DRIVER AIR BAG MODULE
DRIVER AIR BAG MODULE : Deployment
INFOID:0000000010927744
DEPLOYMENT OF DRIVER AIR BAG MODULE (OUTSIDE OF VEHICLE)
1.
Unless the vehicle is being scrapped, deploying the air bag in
the vehicle is not recommended. This may cause damage to the
vehicle interior.
Anchor air bag module bracket (SST: KV99105300) (A) in a vice
secured to a firm foundation deployment.
2.
Using wire (D), secure driver air bag module
to air bag mod-
ule bracket (SST: KV99105300) (A) at two places.
CAUTION:
Use wire of at least 1.0 mm (0.039 in) diameter.
3.
Firmly secure air bag module bracket (SST: KV99105300) with
driver air bag module attached, in a vise.
4.
Connect deployment tool adapter (SST: KV99110500) (C) to
driver air bag module and deployment tool (SST: KV99104600)
(B).
5.
Connect the test pin at the tip of deployment tool (SST:
KV99104600) (B) to both terminals of 12V battery (A), and then
the air bag module deploys.
CAUTION:
When deploying the driver air bag module, stand at least 5.0
m (16.4 ft) away from the air bag module.
DRIVER AIR BAG MODULE : Disposal
INFOID:0000000010927745
DISPOSING OF AIR BAG MODULE AND SEAT BELT PRE-TENSIONER
Deployed air bag module, seat belt pre-tensioner, and lap pre-tensioner are very hot. Before disposing of air
bag module and seat belt pre-tensioner, wait at least 30 minutes, and 10 minutes, respectively. Seal them in a
plastic bag before disposal.
CAUTION:
JMHIA0208ZZ
JMHIA2652ZZ
JMHIA0062ZZ
DISPOSAL OF AIR BAG MODULE
SR-41
< REMOVAL AND INSTALLATION >
C
D
E
F
G
I
J
K
L
M
A
B
SR
N
O
P
• Never apply water to a deployed air bag module or seat belt
pre-tensioner or lap pre-tensioner.
• Wear gloves when handling a deployed air bag module or seat
belt pre-tensioner or lap pre-tensioner.
• No poisonous gas is produced upon air bag module deploy-
ment. However, be careful not to inhale gas since it irritates
the throat and can cause choking.
• Never disassemble air bag module, seat belt pre-tensioner
and lap pre-tensioner.
• Air bag module, seat belt pre-tensioner and lap pre-tensioner
cannot be reused.
• Wash your hands clean after the work is complete.
PASSENGER AIR BAG MODULE
PASSENGER AIR BAG MODULE : Deployment
INFOID:0000000010927746
DEPLOYMENT OF PASSENGER AIR BAG MODULE (OUTSIDE OF VEHICLE)
1.
Make 8.5 mm (0.335 in) diameter hole
in air bag module
bracket (SST: KV99105300) (A) at the position shown in figure.
2.
Firmly secure air bag module bracket (SST: KV99105300) (A) in
a vise.
3.
Insert bolt (D) through air bag module bracket and passenger air
bag module
lower side holes, and fix then with nut.
4.
Connect deployment tool (SST: KV99104600) (B) and deploy-
ment tool adapter (SST: KV99110500) (C) to passenger air bag
module.
5.
Connect the test pin at the tip of deployment tool (SST:
KV99104600) (B) to both terminals of 12V battery (A), and then
the air bag module deploys.
CAUTION:
• When deploying the passenger air bag module, never
stand on the deploying side.
• Stand at least 5.0 m (16.4 ft) away from the passenger air
bag module.
PASSENGER AIR BAG MODULE : Disposal
INFOID:0000000010927747
DISPOSING OF AIR BAG MODULE AND SEAT BELT PRE-TENSIONER
SBF276H
JMHIA0225ZZ
JMHIA1708ZZ
JMHIA0062ZZ
Нет комментариевНе стесняйтесь поделиться с нами вашим ценным мнением.
Текст