Nissan X-Trail 32. Manual — part 610
REAR DOOR LOCK
DLK-781
< REMOVAL AND INSTALLATION >
[TYPE 3]
C
D
E
F
G
H
I
J
L
M
A
B
DLK
N
O
P
8.
Remove front gasket
and rear gasket
.
9.
Slide outside handle bracket toward rear of vehicle and remove
it.
10. Disconnect outside handle cable
from outside handle bracket
according to the numerical order 1
→
2 indicated by arrows as
shown in the figure.
INSTALLATION
Note the following items, and then install in the reverse order of removal.
CAUTION:
• When installing outside handle cable to outside handle, be careful that outside handle cable is
routed normally.
• After installation, check door lock. Refer to
DLK-779, "DOOR LOCK : Inspection"
.
: Pawl
: Vehicle front
JMKIB2240ZZ
: Vehicle front
JMKIB2241ZZ
JMKIB2242ZZ
DLK-782
< REMOVAL AND INSTALLATION >
[TYPE 3]
BACK DOOR LOCK
BACK DOOR LOCK
Exploded View
INFOID:0000000010728593
DOOR LOCK
DOOR LOCK : Removal and Installation
INFOID:0000000010728594
REMOVAL
1.
Remove back door inner finisher. Refer to
INT-47, "Removal and Installation"
2.
Disconnect back door lock assembly harness connector.
3.
Remove back door lock assembly mounting bolts, and then remove back door lock assembly from back
door panel.
INSTALLATION
Note the following item, and then install in the reverse order of removal.
CAUTION:
After installation, check back door lock. Refer to
DLK-782, "DOOR LOCK : Inspection"
DOOR LOCK : Inspection
INFOID:0000000010728595
1.
After opening and closing the back door, check that door is fixed to the vehicle body normally.
2.
Check the lock/unlock operation of door lock.
Back door panel
Back door lock assembly
: N·m (kg-m, in-lb)
: Body grease
: Indicates that the part is connected at points with same symbol in actual vehicle.
JMKIB3481GB
BACK DOOR LOCK
DLK-783
< REMOVAL AND INSTALLATION >
[TYPE 3]
C
D
E
F
G
H
I
J
L
M
A
B
DLK
N
O
P
3.
Check door lock assembly for poor lubrication. Apply body
grease to door lock if necessary.
DOOR LOCK : Unlock procedures
INFOID:0000000010728596
UNLOCK PROCEDURES
NOTE:
Release lock according to the following procedures when lock cannot be unlocked due to a malfunction of
door lock assembly or battery discharge.
Insert a screwdriver, etc. into tool insertion hole
of back door inner finisher
, and then back door lock is
unlocked by operating opener lever
in the direction of arrow as shown in the figure.
: Body grease
JMKIB1220ZZ
: Vehicle front
JMKIB3162ZZ
DLK-784
< REMOVAL AND INSTALLATION >
[TYPE 3]
FUEL FILLER LID OPENER
FUEL FILLER LID OPENER
Exploded View
INFOID:0000000010728599
FUEL FILLER LID
FUEL FILLER LID : Removal and Installation
INFOID:0000000010728600
REMOVAL
1.
Fully open fuel filler lid.
Fuel filler lid opener cable
Cable protector
Fuel filler lid lock assembly
Bumper rubber
Fuel filler lid assembly
Spring
: Clip
: Pawl
: Always replace after every disassembly.
JMKIB3182ZZ
Нет комментариевНе стесняйтесь поделиться с нами вашим ценным мнением.
Текст