Nissan X-Trail 32. Manual — part 611

FUEL FILLER LID OPENER

DLK-785

< REMOVAL AND INSTALLATION >

[TYPE 3]

C

D

E

F

G

H

I

J

L

M

A

B

DLK

N

O

P

2.

Remove fuel mounting pin

.

3.

Remove mounting bolts, and then remove fuel filler lid assembly.

INSTALLATION

Note the following items, and then install in the reverse order of removal.

CAUTION:

• After installation, apply the touch-up paint (the body color) onto the head of the mounting screws.
• After installation, check fuel filler lid assembly open/close, lock/unlock operation.
NOTE:
• The following table shows the specified values for checking normal installation status.
• Fitting adjustment cannot be performed.

Unit: mm [in]

FUEL FILLER LID LOCK

FUEL FILLER LID LOCK : Removal and Installation

INFOID:0000000010728601

REMOVAL

1.

Fully open fuel filler lid.

2.

Remove luggage side lower finisher RH. Refer to

INT-43, "LUGGAGE SIDE LOWER FINISHER :

Removal and Installation"

.

3.

Rotate fuel filler lid lock assembly to disengage pawls and
remove fuel filler lid lock assembly according to the numerical
order 1

→

2 indicated by arrows as shown in the figure.

NOTE:
Operation is performed easily when rotating fuel filler lid lock
from passenger room side.

4.

Disengage fuel filler lid opener cable

and remove fuel filler lid

opener cable while pressing stopper pin

according to the

numerical order 1

→

4 indicated by arrows as shown in the figure.

JMKIB3183ZZ

Clearance

Evenness

Fuel filler lid – Body side outer

2.5 – 4.5

[0.098 – 0.177]

(

−

1.0) – (+1.0)

[(

−

0.039) – (+0.039)]

: Pawl

: Vehicle front

JMKIB1094ZZ

JMKIA5719ZZ

DLK-786

< REMOVAL AND INSTALLATION >

[TYPE 3]

FUEL FILLER LID OPENER

INSTALLATION

Note the following item, and then install in the reverse order of removal.

CAUTION:

After installation, check fuel filler lid assembly open/close, lock/unlock operation.

FUEL FILLER OPENER CABLE

FUEL FILLER OPENER CABLE : Removal and Installation

INFOID:0000000010728602

REMOVAL

1.

Remove hood lock control handle mounting bolts, and then hood lock control handle. Refer to

DLK-770,

"HOOD LOCK CONTROL HANDLE : Removal and Installation"

.

2.

Remove fuel filler lid opener cable

from fuel filler lid opener

lever

according to the numerical order 1

→

2 indicated by

arrows as shown in the figure.

3.

Remove kicking plate inner RH and rear kicking plate inner RH. Refer to

INT-24, "KICKING PLATE :

Removal and Installation"

.

4.

Remove dash side finisher RH. Refer to

INT-26, "DASH SIDE FINISHER : Removal and Installation"

.

5.

Remove center pillar lower garnish RH. Refer to

INT-27, "CENTER PILLAR LOWER GARNISH : Removal

and Installation"

.

6.

Remove luggage side lower finisher RH. Refer to

INT-43, "LUGGAGE SIDE LOWER FINISHER :

Removal and Installation"

.

7.

Remove fuel filler lid opener cable from fuel filler lid lock assembly. Refer to

DLK-785, "FUEL FILLER LID

LOCK : Removal and Installation"

.

8.

Remove fuel filler lid opener cable from harness protectors.

9.

Remove fuel filler lid opener cable fixing clips, and then remove fuel filler lid opener cable.

INSTALLATION

Note the following item, and then install in the reverse order of removal.

CAUTION:

After installation, check fuel filler lid assembly open/close, lock/unlock operation.

JMKIA5672ZZ

DOOR SWITCH

DLK-787

< REMOVAL AND INSTALLATION >

[TYPE 3]

C

D

E

F

G

H

I

J

L

M

A

B

DLK

N

O

P

DOOR SWITCH

Removal and Installation

INFOID:0000000010708478

REMOVAL

1.

Remove the TORX bolt

.

2.

Disconnect door switch harness connector and then remove
door switch

.

INSTALLATION

Install in the reverse order of removal.

JMKIA2173ZZ

DLK-788

< REMOVAL AND INSTALLATION >

[TYPE 3]

DOOR LOCK STATUS INDICATOR

DOOR LOCK STATUS INDICATOR

Removal and Installation

INFOID:0000000010735504

REMOVAL

1.

Remove A/C control. Refer to

HAC-125, "Removal and Installation"

.

2.

Remove door lock status indicator mounting bolt

, and then

remove door lock status indicator

.

INSTALLATION

Install in the reverse order of removal.

JMKIB3656ZZ