Nissan X-Trail 32. Manual — part 613
PREPARATION
DLK-793
< PREPARATION >
[TYPE 4]
C
D
E
F
G
H
I
J
L
M
A
B
DLK
N
O
P
PREPARATION
PREPARATION
Commercial Service Tools
INFOID:0000000010755001
Tool name
Description
Engine ear
Locating the noise
Remover tool
Remove the clips, pawls, and metal clips
Power tool
SIIA0995E
PIIB7923J
PIIB1407E
DLK-794
< SYSTEM DESCRIPTION >
[TYPE 4]
COMPONENT PARTS
SYSTEM DESCRIPTION
COMPONENT PARTS
Component Parts Location
INFOID:0000000010755002
View with door opened
View with back door panel
No.
Component
Function
Combination meter
• Performs operation method guide and warning with buzzer.
• Transmits vehicle speed signal to CAN communication line.
TCM
Transmits shift position signal to BCM via CAN communication line.
Refer to
TM-235, "CVT CONTROL SYSTEM : Component Parts Location"
for de-
tailed installation location.
BCM
BCM detects the vehicle status according to signals from each door switch. BCM
transmits drive signal to door lock actuator when BCM receives operation signal
from remote keyless entry receiver (integrated in BCM).
Refer to
BCS-6, "BODY CONTROL SYSTEM : Component Parts Location"
for de-
tailed installation location.
Ignition key cylinder (key switch)
DLK-796, "Ignition Key Cylinder"
Power window main switch (door lock
and unlock switch)
DLK-796, "Door Lock and Unlock Switch"
Front door lock assembly (driver side)
Rear door lock assembly LH
Back door lock assembly
DLK-795, "Back Door Lock Assembly"
JMKIB3591ZZ
COMPONENT PARTS
DLK-795
< SYSTEM DESCRIPTION >
[TYPE 4]
C
D
E
F
G
H
I
J
L
M
A
B
DLK
N
O
P
Back Door Lock Assembly
INFOID:0000000010755003
• Back door lock assembly integrates back door opener actuator and back door switch.
• Back door opener actuator opens the back door according to the back door open signal from BCM.
• Back door switch detects open/close status of back door.
• Back door lock assembly is installed in the back door panel.
Back Door Opener Switch Assembly
INFOID:0000000010755004
• Back door opener switch assembly integrates back door opener switch.
• Back door opener switch detects open operation of back door and transmits back door opener switch signal
to BCM.
• Back door opener switch assembly is installed in the back door
panel.
Door Lock Assembly
INFOID:0000000010755005
• Door lock actuator and unlock sensor are integrated in front door
lock assembly (driver side).
• Door lock actuator receives lock/unlock signal from BCM, and then
locks/unlocks door.
• Only front door lock assembly (driver side) integrates unlock sen-
sor. Unlock sensor transmits lock/unlock status of driver side door
to BCM.
Rear door lock assembly RH
Front door lock assembly (passenger
side)
Door switch
Back door opener switch assembly
DLK-795, "Back Door Opener Switch Assembly"
No.
Component
Function
JMKIB2941ZZ
JMKIA9666ZZ
JMKIA9347ZZ
DLK-796
< SYSTEM DESCRIPTION >
[TYPE 4]
COMPONENT PARTS
Door Lock and Unlock Switch
INFOID:0000000010755006
• Door lock and unlock switch transmits door lock/unlock signal operation to BCM.
• Door lock and unlock switch
is integrated in the power window
main switch.
• Passenger side door lock and unlock switch
is integrated in front
power window switch (passenger side).
Door Switch
INFOID:0000000010755007
Detects door open/close condition.
Ignition Key Cylinder
INFOID:0000000010755008
• Key switch is installed in ignition key cylinder.
• Key switch detects ignition key or keyfob is inserted in ignition key
cylinder, and then transmits key insertion status to BCM.
JMKIA9352ZZ
JMKIB1506ZZ
JMKIA9779ZZ
JMKIB0273ZZ
Нет комментариевНе стесняйтесь поделиться с нами вашим ценным мнением.
Текст