Nissan X-Trail 32. Manual — part 1598
MWI-74
< SYSTEM DESCRIPTION >
SYSTEM
INDICATOR
Parking sensor error
•
SN-17, "INFORMATION DISPLAY (COMBINATION
METER) : Parking Sensor Error"
(WITHOUT PARK AS-
SIST)
•
SN-128, "INFORMATION DISPLAY (COMBINATION
METER) : Parking Sensor Error"
(WITH PARK ASSIST)
Stop/Start system warning
EC-864, "INFORMATION DISPLAY (COMBINATION
METER) : Indicator/Information"
Indicator
Reference
Chassis control display
BRC-67, "INFORMATION DISPLAY (COMBINATION
METER) : Chassis Control Display"
(BRAKE CONTROL
SYSTEM), and
DAS-187, "INFORMATION DISPLAY (COM-
BINATION METER) : Chassis Control Display"
(DRIVER
ASSISTANCE SYSTEM)
ASCD indicator
•
EC-474, "INFORMATION DISPLAY (COMBINATION
METER) : ASCD Indicator"
(QR25DE)
•
EC-864, "INFORMATION DISPLAY (COMBINATION
METER) : Indicator/Information"
(R9M)
4WD torque distribution indicator
•
DLN-23, "INFORMATION DISPLAY (COMBINATION
METER) : 4WD Torque Distribution Indicator"
(TY21C)
•
DLN-127, "INFORMATION DISPLAY (COMBINATION
METER) : 4WD Torque Distribution Indicator"
(TY30A)
ECO mode indicator
DMS-8, "INFORMATION DISPLAY (COMBINATION
METER) : ECO Mode Indicator"
Shift position indicator
•
TM-268, "INFORMATION DISPLAY (COMBINATION
METER) : Shift Position Indicator"
(RE0F10D)
•
TM-505, "INFORMATION DISPLAY (COMBINATION
METER) : Shift Position Indicator"
(RE0F10G)
Gear shift indicator
EC-864, "INFORMATION DISPLAY (COMBINATION
METER) : Indicator/Information"
Low tire pressure location Indicator
WT-12, "INFORMATION DISPLAY (COMBINATION
METER) : Low Tire Pressure Location Indicator"
Tire pressure display
WT-13, "INFORMATION DISPLAY (COMBINATION
METER) : Tire Pressure Display"
LDW system display
DAS-30, "LDW : Menu Displayed by Pressing Each Switch"
BSW system display
DAS-33, "BSW : Menu Displayed by Pressing Each Switch"
DAA system display
DAS-38, "DAA : Menu Displayed by Pressing Each Switch"
TSR system display
DAS-36, "TSR : Menu Displayed by Pressing Each Switch"
Audio indicator
•
AV-17, "AUDIO SYSTEM : System Description"
(BASE
AUDIO)
•
(WITH NAVIGATION)
Navigation indicator
Hands-free phone indicator
•
AV-17, "AUDIO SYSTEM : System Description"
(BASE
AUDIO)
•
(WITH NAVIGATION)
Sonar indicator
•
SN-13, "SONAR SYSTEM : System Description"
(WITH-
OUT PARK ASSIST)
•
SN-124, "SONAR SYSTEM : System Description"
(WITH
PARK ASSIST)
Alert
MWI-64, "WARNING/INDICATOR (ON INFORMATION DIS-
PLAY) : Alert"
Maintenance
MWI-65, "WARNING/INDICATOR (ON INFORMATION DIS-
PLAY) : Maintenance"
Warning
Reference
MWI
SYSTEM
MWI-75
< SYSTEM DESCRIPTION >
C
D
E
F
G
H
I
J
K
L
M
B
A
O
P
ODO/TRIP METER
The combination meter calculates mileage, based on the following signals and displays the mileage on the
information display.
WARNING CONFIRMATION
• The combination meter can cause an interrupt on the information display to indicate a warning, based on
signals received from each unit and switch.
• The indicated warning can be checked with “WARNING” during the satisfaction of an interrupt indication
condition for each warning.
SETTINGS
The condition of following items can be set.
• Driver assistance
• Clock
• Meter settings
• Vehicle settings
• Maintenance
• Alarm
• Tire Pressures
• Unit
• Language
• Factory Reset
TRIP COMPUTER
Current Fuel Consumption
The combination meter calculates current fuel consumption based on the following signals, and the calculated
value is displayed on the information display.
Current fuel consumption can be compared with average fuel consumption.
NOTE:
• Current fuel consumption on the information display is updated approximately every 0.1 seconds.
• Current fuel consumption on the information display shows 0 l/100km (0 mpg) when vehicle speed is 0 km/h
(0 MPH).
ECO Pedal Guide
Stop/Start switch status
EC-864, "INFORMATION DISPLAY (COMBINATION
METER) : Indicator/Information"
Stop/Start system indicator
EC-864, "INFORMATION DISPLAY (COMBINATION
METER) : Indicator/Information"
Indicator
Reference
Signal name
Signal path
Ignition signal
—
Vehicle speed signal
ABS actuator and electric unit (control unit)
Combination meter
Signal name
Signal source
Ignition signal
—
Fuel consumption monitor signal
ECM
Combination meter
Vehicle speed signal
ABS actuator and electric unit (control unit)
Combination meter
Steering switch signal
Steering switch
Combination meter
MWI-76
< SYSTEM DESCRIPTION >
SYSTEM
The ECO pedal guide consists of Gauge 1
(displays accelerator
pedal angle) and Gauge 2
(displays the guideline of ECO driving).
GAUGE1
• ECM corrects the accelerator pedal angle to the maximum angle for ECO driving, according to vehicle
speeds.
The maximum accelerator pedal angle increases/decreases as the vehicle speed increases/decrease.
The maximum accelerator angle corrected by ECM is the limitation of ECO driving. The ECO driving is pos-
sible only when the number of unlit segments
of the indicator bar is equal to or less than that of Gauge 2.
The less the number of unlit segments
of the indicator bar, the
more the degree of ECO driving is. And the more the number of
unlit segments, the less the degree of ECO driving is.
ECM judges the number of lighting segments according to the accelerator pedal angle and vehicle speed
and transmits a CAN communication signal to the combination meter via CAN communication.
The combination meter indicates the number of segments necessary for the ECO pedal guide, according to
an ECO pedal guide signal.
NOTE:
The combination meter corrects the number of lighting segments according to a vehicle speed signal.
GAUGE2
JSNIA5878ZZ
JSNIA5879ZZ
MWI
SYSTEM
MWI-77
< SYSTEM DESCRIPTION >
C
D
E
F
G
H
I
J
K
L
M
B
A
O
P
• The combination meter turns ON/OFF the Gauge 2 (guide line for ECO driving) according to a vehicle speed
signal.
ECO DRIVE INDICATOR
JSNIA6510GB
Нет комментариевНе стесняйтесь поделиться с нами вашим ценным мнением.
Текст