Nissan X-Trail 32. Manual — part 599
HOOD
DLK-737
< REMOVAL AND INSTALLATION >
[TYPE 3]
C
D
E
F
G
H
I
J
L
M
A
B
DLK
N
O
P
Install in the reverse order of removal.
HOOD INSULATOR
HOOD INSULATOR : Removal and Installation
INFOID:0000000010728546
REMOVAL
1.
Remove hood rod clamp from hood assembly.
2.
Remove hood insulator fixing clips, and then remove hood insulator from hood assembly.
INSTALLATION
Install in the reverse order of removal.
: Clip
JMKIB0387ZZ
DLK-738
< REMOVAL AND INSTALLATION >
[TYPE 3]
RADIATOR CORE SUPPORT
RADIATOR CORE SUPPORT
R9M
R9M : Exploded View
INFOID:0000000010728547
R9M : Removal and Installation
INFOID:0000000010728548
RADIATOR CORE SUPPORT UPPER
Removal
1.
Remove air duct 1. Refer to
EM-308, "Removal and Installation"
2.
Remove front grille assembly. Refer to
EXT-22, "Removal and Installation"
.
3.
Remove hood lock assembly. Refer to
DLK-768, "HOOD LOCK : Removal and Installation"
.
4.
Remove hood lock control cable fixing clips from radiator core support upper. Refer to
Radiator core support upper
Air guide RH
Air lower guide
Air guide LH
Radiator core support lower
Hood lock support stay
: N·m (kg-m, ft-lb)
: Indicates that the part is connected at points with same symbol in actual vehicle.
JMKIB3660GB
RADIATOR CORE SUPPORT
DLK-739
< REMOVAL AND INSTALLATION >
[TYPE 3]
C
D
E
F
G
H
I
J
L
M
A
B
DLK
N
O
P
5.
Remove fixing clip
of engine room harness connector
.
6.
Remove fixing clips
of engine room harness
from radiator
core support upper
.
7.
Remove fixing clip
of engine room harness
from radiator
core support upper
.
8.
Remove crash zone sensor. Refer to
SR-31, "Removal and Installation"
.
9.
Remove hood lock support stay mounting bolts, and then move hood lock support stay to a location where
it does not inhibit work.
10. Remove radiator mounting bracket fixing clips. Refer to
.
11. Remove radiator core support upper mounting bolts, and then remove radiator core support upper.
Installation
Install in the reverse order of removal.
RADIATOR CORE SUPPORT LOWER
Removal
1.
Remove front bumper fascia and apron bracket. Refer to
EXT-15, "Removal and Installation"
2.
Remove air lower guide fixing clips, and then remove air lower guide.
: Vehicle front
JMKIB3661ZZ
: Vehicle front
JMKIB3662ZZ
: Vehicle front
JMKIB3005ZZ
DLK-740
< REMOVAL AND INSTALLATION >
[TYPE 3]
RADIATOR CORE SUPPORT
3.
Using strings (A), hang inlet hose
and inlet hose
together
with charge air cooler.
CAUTION:
Never damage inlet hoses and charge air cooler.
4.
Use belts (A) to suspend radiator and condenser to prevent
them from falling as shown in the figure.
CAUTION:
Never damage radiator and condenser.
5.
Remove radiator core support lower mounting bolts, and then remove radiator core support lower.
Installation
Install in the reverse order of removal.
JMKIB3663ZZ
JMKIB3664ZZ
Нет комментариевНе стесняйтесь поделиться с нами вашим ценным мнением.
Текст