Nissan X-Trail 32. Manual — part 600
FRONT FENDER
DLK-741
< REMOVAL AND INSTALLATION >
[TYPE 3]
C
D
E
F
G
H
I
J
L
M
A
B
DLK
N
O
P
FRONT FENDER
Exploded View
INFOID:0000000010728549
FRONT FENDER
FRONT FENDER : Removal and Installation
INFOID:0000000010728550
REMOVAL
1.
Remove front fender protector. Refer to
EXT-35, "FENDER PROTECTOR : Removal and Installation"
2.
Remove sill cover. Refer to
EXT-62, "Removal and Installation"
3.
Remove front bumper fascia assembly and bumper side bracket. Refer to
EXT-15, "Removal and Installa-
4.
Remove front combination lamp. Refer to
EXL-191, "Removal and Installation"
(LED headlamp),
376, "Removal and Installation"
(halogen headlamp).
5.
Remove front fender cover. Refer to
DLK-742, "FENDER COVER : Removal and Installation"
.
Front fender cover
Front fender spacer
Front hood seal
Front fender bracket
Front fender assembly
Front fender seal
: Pawl
JMKIB3665ZZ
DLK-742
< REMOVAL AND INSTALLATION >
[TYPE 3]
FRONT FENDER
6.
Remove front hood seal fixing clips
and front fender spacers
, and then remove front hood seal
.
7.
Remove mounting bolts of front fender assembly.
8.
Remove front fender stiffener
from the vehicle body while
carefully pulling upper portion of front fender
toward vehicle
outside.
9.
Remove front fender assembly.
CAUTION:
A viscous urethane foam is installed on the back surface of front fender. When removing the front
fender, be careful to not deform the front fender while performing the procedure and removing the
viscous urethane foam a little at a time.
INSTALLATION
Note the following items, and then install in the reverse order of removal.
CAUTION:
• After installation, adjust the following part.
- Hood assembly: Refer to
DLK-733, "HOOD ASSEMBLY : Adjustment"
.
- Front door: Refer to
DLK-746, "DOOR ASSEMBLY : Adjustment"
• After installation, apply the touch-up paint (the body color) onto the head of front fender mounting
bolts.
FENDER COVER
FENDER COVER : Removal and Installation
INFOID:0000000010728551
REMOVAL
1.
Fully open hood assembly.
JMKIB3666ZZ
: Vehicle front
JMKIA5633ZZ
FRONT FENDER
DLK-743
< REMOVAL AND INSTALLATION >
[TYPE 3]
C
D
E
F
G
H
I
J
L
M
A
B
DLK
N
O
P
2.
Disengage fixing pawls according to the numerical order 1
→
3 indicated by arrows as shown in the figure,
and then remove front fender cover.
CAUTION:
When performing the procedure after removing fender cover, protect the lower of windshield glass
with urethane etc.
INSTALLATION
Note the following item, and then install in the reverse order of removal.
CAUTION:
Install so that there is no clearance between windshield and cowl top cover.
: Pawl
: Vehicle front
JMKIB3008ZZ
DLK-744
< REMOVAL AND INSTALLATION >
[TYPE 3]
FRONT DOOR
FRONT DOOR
Exploded View
INFOID:0000000010728552
Front door panel
Door hinge (upper)
Door hinge (lower)
Door check link
Bumper rubber
Bumper rubber
JMKIB3163GB
Нет комментариевНе стесняйтесь поделиться с нами вашим ценным мнением.
Текст