Nissan X-Trail 32. Manual — part 2187
TM-706
< UNIT REMOVAL AND INSTALLATION >
[CVT: RE0F10G]
TRANSAXLE ASSEMBLY
*: Stud bolt
Inspection and Adjustment
INFOID:0000000010622931
INSPECTION BEFORE INSTALLATION
After inserting a torque converter to the CVT, check dimension (A)
with in the reference value limit.
INSPECTION AFTER INSTALLATION
Check the following items:
• CVT fluid leakage, refer to
.
• For CVT position, refer to
.
• Start the engine and check for coolant leakage from the parts which are removed and reinstalled.
ADJUSTMENT AFTER INSTALLATION
• Adjust the CVT fluid level. Refer to
• When replaced transaxle assembly, perform "ADDITIONAL SERVICE WHEN REPLACING TRANSAXLE
ASSEMBLY". Refer to
.
Bolt No.
*
*
Insertion direction
Transaxle to engine
Engine to
transaxle
Transaxle
to engine
Engine to
transaxle
Number of bolts
1
1
3
2
4
Bolt length
mm (in)
—
—
60 (2.36)
30(1.18)
55 (2.17)
Stud length
mm (in)
56(2.20)
96(3.78)
—
—
—
Tightening torque
N·m (kg-m, ft-lb)
48.0 (4.9, 35)
JSDIA5239ZZ
B
: Scale
C
: Straightedge
Dimension (A)
: Refer to
.
JPDIA0115ZZ
TORQUE CONVERTER AND CONVERTER HOUSING OIL SEAL
TM-707
< UNIT DISASSEMBLY AND ASSEMBLY >
[CVT: RE0F10G]
C
E
F
G
H
I
J
K
L
M
A
B
TM
N
O
P
UNIT DISASSEMBLY AND ASSEMBLY
TORQUE CONVERTER AND CONVERTER HOUSING OIL SEAL
Exploded View
INFOID:0000000010622932
Disassembly
INFOID:0000000010622933
1.
Remove transaxle assembly. Refer to
TM-704, "Removal and Installation"
2.
Remove torque converter from transaxle assembly.
CAUTION:
Never damage the bushing on the inside of torque converter sleeve when removing torque con-
verter.
3.
Remove O-ring from input shaft.
4.
Remove converter housing oil seal using a suitable tool.
CAUTION:
Be careful not to scratch converter housing.
Assembly
INFOID:0000000010622934
Note the followings and assembly is in the reverse order of disassembly.
CAUTION:
• Never reuse O-ring.
• Never reuse converter housing oil seal.
• Apply CVT fluid to O-ring.
• Apply CVT fluid to converter housing oil seal.
Torque converter
O-ring
Converter housing oil seal
Transaxle assembly
: Always replace after every disassembly.
: Apply CVT fluid
JSDIA4173ZZ
TM-708
< UNIT DISASSEMBLY AND ASSEMBLY >
[CVT: RE0F10G]
TORQUE CONVERTER AND CONVERTER HOUSING OIL SEAL
• Drive converter housing oil seal
evenly using a drift (A) (com-
mercial service tool) so that converter housing oil seal protrudes by
the dimension (B) respectively.
Unit: mm (in)
NOTE:
Converter housing oil seal pulling direction is used as the refer-
ence.
• Attach the pawl
of the torque converter to the drive sprocket
hole
on the transaxle assembly side.
CAUTION:
• Rotate the torque converter for installing torque converter.
• Never damage the bushing inside the torque converter
sleeve when installing the converter housing oil seal.
Inspection
INFOID:0000000010622935
INSPECTION AFTER INSTALLATION
Drift (A)
Outer diameter: 65 (2.56)
Inner diameter: 60 (2.36)
: Transaxle assembly
SCIA7908J
Dimension (B)
: 1.0
±
0.5 mm (0.039
±
0.020 in)
SCIA7909J
SCIA7907J
TORQUE CONVERTER AND CONVERTER HOUSING OIL SEAL
TM-709
< UNIT DISASSEMBLY AND ASSEMBLY >
[CVT: RE0F10G]
C
E
F
G
H
I
J
K
L
M
A
B
TM
N
O
P
• After inserting a torque converter to the CVT, check dimension (A)
with in the reference value limit.
B
: Scale
C
: Straightedge
Dimension (A)
: Refer to
.
JPDIA0115ZZ
Нет комментариевНе стесняйтесь поделиться с нами вашим ценным мнением.
Текст