Nissan Teana J32. Manual — part 602
EXT-18
< ON-VEHICLE REPAIR >
FRONT GRILLE
FRONT GRILLE
Exploded View
INFOID:0000000003819533
Removal and Installation
INFOID:0000000003819534
REMOVAL
CAUTION:
Apply protection tape around outer circumference of front grille (bumper fascia side).
1.
Fully open hood assembly.
2.
Remove front grille mounting nuts (A).
3.
Pull front grille out toward vehicle front.
4.
Remove the following parts after removing front grille.
Front emblem
1.
Front grille
2.
Front emblem
: Pawl
JMKIA2528ZZ
JMKIA2529ZZ
FRONT GRILLE
EXT-19
< ON-VEHICLE REPAIR >
C
D
E
F
G
H
I
J
L
M
A
B
EXT
N
O
P
INSTALLATION
Install in the reverse order of removal.
EXT-20
< ON-VEHICLE REPAIR >
COWL TOP
COWL TOP
Exploded View
INFOID:0000000003819535
Removal and Installation
INFOID:0000000003819536
REMOVAL
1.
Fully open hood assembly.
2.
Remove front fender covers (LH/RH). Refer to
DLK-199, "Removal and Installation"
3.
Remove front wiper arms (LH/RH) from vehicle. Refer to
WW-105, "Removal and Installation"
4.
Remove cowl top cover seal.
5.
Remove cowl top cover clips on cowl top cover front side.
1.
Cowl top end rubber RH
2.
Cowl top cover seal
3.
Cowl top end rubber LH
4.
Cowl top cover
5.
EPT sealer
6.
Cowl top cover clip
: Clip
for symbols in the figure.
JMKIA2655ZZ
PIIB2815J
COWL TOP
EXT-21
< ON-VEHICLE REPAIR >
C
D
E
F
G
H
I
J
L
M
A
B
EXT
N
O
P
6.
Remove cowl top cover fixing clips on cowl top cover top side.
7.
Remove cowl top end rubbers (LH/RH) from cowl top cover.
CAUTION:
• Replace double-faced adhesive tape on cowl top end rubber with a new tape if cowl top end rub-
ber is reused.
• To secure contact, never wash vehicle within 24 hours after installation.
INSTALLATION
Install in the reverse order of removal.
CAUTION:
• After installing, perform adjustment of wiper arm. Refer to
.
• Always replace cowl top cover EPT sealer on rear of vehicle with a new one when installing old cowl
top cover.
Нет комментариевНе стесняйтесь поделиться с нами вашим ценным мнением.
Текст