Nissan Teana J32. Manual — part 766
INSTRUMENT PANEL ASSEMBLY
IP-21
< ON-VEHICLE REPAIR >
C
D
E
F
G
H
I
K
L
M
A
B
IP
N
O
P
• Put selector lever in the [D] position.
• Pull back instrument panel assembly, and then remove front
squawker LH harness clip (A).
• Remove instrument panel from passenger door opening portion.
CAUTION:
• Cover center console upper surface with a shop cloth to prevent it from being damaged.
• When removing instrument panel assembly, 2 workers are required so as to prevent it from drop-
ping.
48. Remove the following parts after removing instrument panel assembly.
• Front passenger air bag module. Refer to
SR-12, "Removal and Installation"
• Side ventilator grille LH/RH. Refer to
VTL-46, "SIDE VENTILATOR GRILLE : Removal and Installation"
• Side defroster nozzle LH/RH. Refer to
VTL-47, "SIDE DEFROSTER GRILLE : Removal and Installa-
• Ventilator duct LH/RH. Refer to
VTL-48, "VENTILATOR DUCT : Removal and Installation"
• Defroster nozzle. Refer to
VTL-49, "SIDE DEFROSTER NOZZLE : Removal and Installation"
.
• Antenna feeder. Refer to
INSTALLATION
Install in the reverse order of removal.
JMJIA1923ZZ
IP-22
< ON-VEHICLE REPAIR >
CENTER CONSOLE ASSEMBLY
CENTER CONSOLE ASSEMBLY
Exploded View
INFOID:0000000003816779
Removal and Installation
INFOID:0000000003819349
REMOVAL
1.
Ashtray lamp harness
2.
Cigarette lighter complete
3.
Cigarette lighter ring
4.
Console ashtray assembly
5.
Instrument lower cover RH
6.
Instrument lower cover LH
7.
Center console assembly
8.
Console switch panel
9.
Console bracket
10. Inside key antenna
11.
Console rear ashtray
12. Console rear finisher
13. Rear ventilator grille
14. Power socket cap
15. Power socket inner case
16. Console mask
17. Console lid assembly
18. Cup holder assembly
19. Console finisher assembly
20. Indicator lamp harness
21. Shift lock switch
22. Inner ashtray
23. Control device upper case
24. Auxiliary input jacks
JMJIA1924ZZ
CENTER CONSOLE ASSEMBLY
IP-23
< ON-VEHICLE REPAIR >
C
D
E
F
G
H
I
K
L
M
A
B
IP
N
O
P
1.
Remove instrument finisher D.
• Remove instrument finisher D (1) fixing clips with remover tool
(A).
• Pull back instrument finisher D, and then remove instrument
finisher D.
2.
Remove instrument finisher E.
• Remove instrument finisher E (1) fixing clips with remover tool
(A).
• Pull back instrument finisher E, and then remove instrument
finisher E.
3.
Remove front body side welt LH. Refer to
INT-39, "Removal and Installation"
.
4.
Remove hood opener lever fixing bolts. Refer to
DLK-220, "Removal and Installation"
.
5.
Remove fuse block lid.
• Open the fuse block lid (1).
• Pull fuse block lid, backward to disengage from instrument
lower panel LH.
6.
Remove instrument lower panel LH.
• Remove instrument lower panel LH (1) fixing screw (A).
• Pull instrument lower panel LH, backward to disengage from
instrument panel assembly.
• Release data link connector (pawl) then remove it from instru-
ment lower panel LH.
• Disconnect harness connectors and aspirator duct.
: Clip
JMJIA1892ZZ
: Clip
JMJIA1893ZZ
: Pawl
JMJIA1896ZZ
: Clip
: Pawl
JMJIA1897ZZ
IP-24
< ON-VEHICLE REPAIR >
CENTER CONSOLE ASSEMBLY
7.
Remove instrument lower cover LH.
• Disengage instrument lower cover LH (1) fixing pawl and
metal clips.
• Pull back instrument lower cover LH.
8.
Remove front body side welt RH. Refer to
INT-39, "Removal and Installation"
9.
Remove instrument side finisher RH.
• Insert a remover tool (A) into lower space.
• Pull the instrument side finisher RH (1) crosswise.
10. Remove glove box assembly.
• Remove glove box assembly (1) fixing screws (A).
• Open the glove box lid.
• Remove glove box assembly fixing screws (B).
• Pull back glove box assembly.
• Disconnect harness connector.
11. Remove instrument side panel RH.
• Remove instrument side panel RH (1) fixing screw (A).
• Pull toward the direction the arrow is pointing.
: Pawl
: Metal clip
JMJIA1898ZZ
: Pawl
: Metal clip
JMJIA1900ZZ
: Pawl
JMJIA1901ZZ
: Clip
: Pawl
JMJIA1902ZZ
Нет комментариевНе стесняйтесь поделиться с нами вашим ценным мнением.
Текст