Nissan Murano Z50 (2006 year). Manual — part 192
AUTOMATIC DRIVE POSITIONER
SE-15
C
D
E
F
G
H
J
K
L
M
A
B
SE
Revision: 2006 August
2006 Murano
MEMORY OPERATION
Selecting the memorized position.
NOTE:
The driver's seat position and pedal adjustment functions (see the following table) operate simultaneously in
the order of priority.
*: In conjunction with sliding the seat, the door mirrors are positioned.
ENTRY OPERATION
When the seat are on the exiting positions, the following operation moves the seat to the previous position
before the exiting operation.
EXITING OPERATION
At Entry/Exiting, the seat are automatically moved to the exiting position.
Priority
Function
Priority
Function
1
Seat sliding, (door mirror LH/RH)*
4
Seat lifter-FR
2
Pedal
5
Seat lifter-RR
3
Seat reclining
PIIA4798E
PIIB2805E
PIIB2806E
SE-16
AUTOMATIC DRIVE POSITIONER
Revision: 2006 August
2006 Murano
KEYFOB INTERLOCK OPERATION
●
The system performs memory operation, exiting operation and return operation by pressing keyfob unlock
button.
NOTE:
●
If Entry/Exiting operation is cancelled, the system performs memory operation only.
●
If ignition switch turns ON in the middle of memory operation, the system does not perform exiting opera-
tion after memory operation.
●
If ignition switch turns ON in the middle of exiting operation, entry operation starts at that time.
PIIA4797E
AUTOMATIC DRIVE POSITIONER
SE-17
C
D
E
F
G
H
J
K
L
M
A
B
SE
Revision: 2006 August
2006 Murano
Component Parts And Harness Connector Location
NIS001F3
PIIB3194E
SE-18
AUTOMATIC DRIVE POSITIONER
Revision: 2006 August
2006 Murano
CAN Communication System Description
NIS001F4
CAN (Controller Area Network) is a serial communication line for real time application. It is an on-vehicle mul-
tiplex communication line with high data communication speed and excellent error detection ability. Many elec-
tronic control units are equipped onto a vehicle, and each control unit shares information and links with other
control units during operation (not independent). In CAN communication, control units are connected with 2
communication lines (CAN H line, CAN L line) allowing a high rate of information transmission with less wiring.
Each control unit transmits/receives data but selectively reads required data only.
CAN Communication Unit
NIS001F5
Refer to
LAN-32, "CAN Communication Unit"
PIIB7814E
AUTOMATIC DRIVE POSITIONER
SE-19
C
D
E
F
G
H
J
K
L
M
A
B
SE
Revision: 2006 August
2006 Murano
Schematic
NIS001F6
TIWB0809E
SE-20
AUTOMATIC DRIVE POSITIONER
Revision: 2006 August
2006 Murano
TIWB0829E
AUTOMATIC DRIVE POSITIONER
SE-21
C
D
E
F
G
H
J
K
L
M
A
B
SE
Revision: 2006 August
2006 Murano
Wiring Diagram — AUT/DP —
NIS001F7
TIWB0810E
SE-22
AUTOMATIC DRIVE POSITIONER
Revision: 2006 August
2006 Murano
TIWB0184E
AUTOMATIC DRIVE POSITIONER
SE-23
C
D
E
F
G
H
J
K
L
M
A
B
SE
Revision: 2006 August
2006 Murano
TIWB0185E
SE-24
AUTOMATIC DRIVE POSITIONER
Revision: 2006 August
2006 Murano
TIWB0186E
AUTOMATIC DRIVE POSITIONER
SE-25
C
D
E
F
G
H
J
K
L
M
A
B
SE
Revision: 2006 August
2006 Murano
TIWB0187E
SE-26
AUTOMATIC DRIVE POSITIONER
Revision: 2006 August
2006 Murano
TIWB0188E
AUTOMATIC DRIVE POSITIONER
SE-27
C
D
E
F
G
H
J
K
L
M
A
B
SE
Revision: 2006 August
2006 Murano
TIWB0189E
SE-28
AUTOMATIC DRIVE POSITIONER
Revision: 2006 August
2006 Murano
TIWB0190E
AUTOMATIC DRIVE POSITIONER
SE-29
C
D
E
F
G
H
J
K
L
M
A
B
SE
Revision: 2006 August
2006 Murano
TIWB0830E
SE-30
AUTOMATIC DRIVE POSITIONER
Revision: 2006 August
2006 Murano
TIWB0811E
Нет комментариевНе стесняйтесь поделиться с нами вашим ценным мнением.
Текст