Nissan Juke (2016 year). Service Repair Manual — part 3
AV-12
< SYSTEM DESCRIPTION >
[DISPLAY AUDIO]
SYSTEM
• Spoken voice sound output from the microphone (microphone signal) is input to audio unit.
• Audio unit outputs to cellular phone with Bluetooth
®
communication as a TEL voice signal.
• Voice sound is then heard at the other party.
When Receiving A Call
• Voice sound is input to own cellular phone from the other party.
• TEL voice signal is input to audio unit by establishing Bluetooth
®
communication from cellular phone, and
the signal is output to front speakers.
SPEED SENSITIVE VOLUME SYSTEM
Volume level of this system goes up and down automatically in proportion to the vehicle speed. The control
level can be selected by the customer. Refer to Owner's Manual for operating instructions.
REAR VIEW MONITOR FUNCTION
Operation Description
• When the selector lever is shifted to the reverse position, the rear view monitor image is displayed.
• When the selector lever is shifted to any position other than the reverse position, the original image (the
image displayed before the rear view monitor image) is displayed.
Camera Image Operation Principle
• The audio unit supplies power to the rear view camera when receiving a reverse signal.
• The rear view camera transmits camera images to the audio unit when power is supplied from the audio unit.
• The audio unit combines a warning message and fixed guide lines with an image received from the rear view
camera to display a rear view camera image on the screen.
Vehicle Width and Distance Guide Lines Display Function at Rear View Monitor Display
• The vehicle width and distance guide lines are displayed at the rear view monitor display to allow the driver
to more easily judge distances between the vehicle and objects and help the driver back into a parking
space.
Vehicle Width and Distance Guide Lines Display Function at Rear View Monitor Display
Precautions for Vehicle Width And Distance Guide Lines Display on the Rear View Monitor Display
Vehicle width and distance guide lines on the display may be different from actual lines depending on vehicle
conditions and road conditions.
Precautions for road conditions
JSNIA4330GB
Revision: November 2015
2016 JUKE
AV
SYSTEM
AV-13
< SYSTEM DESCRIPTION >
[DISPLAY AUDIO]
C
D
E
F
G
H
I
J
K
L
M
B
A
O
P
• Since guide lines are drawn based on the road, a different distance may be displayed if a protruding block is
present nearby.
Precautions for block
JSNIA8941GB
Revision: November 2015
2016 JUKE
AV-14
< SYSTEM DESCRIPTION >
[DISPLAY AUDIO]
SYSTEM
• Since guide lines are drawn based on the road, a different distance may be displayed if a protruding block is
present nearby.
JSNIA8943GB
Revision: November 2015
2016 JUKE
AV
DIAGNOSIS SYSTEM (AUDIO UNIT)
AV-15
< SYSTEM DESCRIPTION >
[DISPLAY AUDIO]
C
D
E
F
G
H
I
J
K
L
M
B
A
O
P
DIAGNOSIS SYSTEM (AUDIO UNIT)
Description
INFOID:0000000012202456
The audio unit on board diagnosis performs the functions listed in the table below:
On Board Diagnosis Function
INFOID:0000000012202457
METHOD OF STARTING
1. Turn the ignition ON.
2. Turn the audio unit OFF.
3. While pressing the preset 1 button, turn the volume control dial
clockwise and counterclockwise quickly approximately 15 times
or more. Shifting from current screen to previous screen is per-
formed by pressing BACK button.
4. The trouble diagnosis initial screen is displayed, and Self Diagnosis or Confirmation/Adjustment can be
selected.
SELF DIAGNOSIS MODE
Audio Unit Self Diagnosis
1. Select Self Diagnosis.
2. Self diagnosis screen is displayed. The bar graph visible in center of screen indicates progress of self
diagnosis.
3. Diagnosis results are displayed after the self diagnosis is completed. The unit names and the connection
lines are color coded according to the diagnostic results.
1: Control unit (audio unit) is displayed in red.
Replace audio unit if Self Diagnosis did not run because control unit malfunction is indicated. The symptom is audio unit internal
error. Refer to
AV-50, "Removal and Installation"
.
Mode
Description
Self Diagnosis
Audio unit diagnosis.
Confirmation/
Adjustment
Display Diagnosis
The following check functions are available: color tone check by color
spectrum bar display and gray scale check by gradation bar display.
Vehicle Signals
Diagnosis of signals can be performed for vehicle speed, lights, reverse,
EQ pin, ignition, destination and camera type.
Speaker Test
The connection of a speaker can be confirmed by test tone.
Camera System
Guiding line position that overlaps rear view camera image can be adjust-
ed.
AV COMM Diagnosis
Displayed but not used.
Delete Unit Connection Log
Erase the connection history of unit and error history.
Version Information
Displays the audio system version information.
Initialize Setting
Initializes the audio unit memory.
JSNIA7691ZZ
Diagnosis results
Unit
Connection line
Normal
Green
Green
Unit malfunction
1
Red
Green
Revision: November 2015
2016 JUKE
AV-16
< SYSTEM DESCRIPTION >
[DISPLAY AUDIO]
DIAGNOSIS SYSTEM (AUDIO UNIT)
4. Comments of self diagnosis results can be viewed in the diagnosis result screen.
Audio Unit Self Diagnosis Results
Audio Unit Confirmation/Adjustment
1. Select Confirmation/Adjustment.
2. Select each switch on the Confirmation/Adjustment screen to display the relevant trouble diagnosis
screen. Press the BACK switch to return to the initial Confirmation/Adjustment screen.
Display Diagnosis
Vehicle Signals
A comparison check can be made of each actual vehicle signal and the signals recognized by the system.
Speaker Test
Select Speaker Test to display the Speaker Diagnosis screen. Press Start to generate a test tone in a speaker.
Press Start again to generate a test tone in the next speaker. Press End to stop the test tones.
Camera System
Use this mode to adjust the guide line display position of the rear view monitor if necessary after removing the
rear view camera.
Delete Unit Connection Log
Only Unit Part Is Displayed In Red
Screen switch
Description
Possible cause
Control unit
Malfunction is detected in audio unit power
supply and ground circuits.
• Audio unit power supply or ground cir-
cuits.
Refer to
.
• If no malfunction is detected in audio unit
power supply and ground circuits, re-
place audio unit. Refer to
.
AWNIA2632GB
Diagnosis results
Display
Vehicle status
Remarks
Vehicle speed
ON
Vehicle speed > 0 km/h (0 MPH)
Changes in indication may be delayed. This is normal.
OFF
Vehicle speed = 0 km/h (0 MPH)
Lights
ON
Lighting switch is ON
—
OFF
Lighting switch is OFF
Reverse
ON
Shift position is in
″
R
″
Changes in indication may be delayed. This is normal.
OFF
Shift position is in other than
″
R
″
Revision: November 2015
2016 JUKE
AV
DIAGNOSIS SYSTEM (AUDIO UNIT)
AV-17
< SYSTEM DESCRIPTION >
[DISPLAY AUDIO]
C
D
E
F
G
H
I
J
K
L
M
B
A
O
P
Deletes any unit connection records and error records from the audio unit memory (clears the records of the
unit that has been removed).
Version Information
Displays audio system version numbers.
Initialize Settings
Deletes data stored from the audio unit.
Revision: November 2015
2016 JUKE
AV-18
< ECU DIAGNOSIS INFORMATION >
[DISPLAY AUDIO]
AUDIO UNIT
ECU DIAGNOSIS INFORMATION
AUDIO UNIT
Reference Value
INFOID:0000000012202458
TERMINAL LAYOUT
PHYSICAL VALUES
JSNIA8066ZZ
Terminal
(Wire color)
Description
Condition
Reference value
(Approx.)
+
–
Signal name
Input/
Output
Ignition
switch
Operation
2
(W)
3
(GR)
Sound signal front speaker
LH
Output
ON
Sound output
4
(LG)
5
(V)
Sound signal rear speaker
LH
Output
ON
Sound output
6
(G)
15
(V)
Steering switch signal A
Input
Ignition
switch
ON
Keep pressing SOURCE
switch.
0 V
Keep pressing SEEK UP
switch.
1.0 V
Keep pressing SEEK
DOWN switch.
2.0 V
Keep pressing TEL switch.
3.0 V
Except for above.
5.0 V
7
(L)
Ground ACC power supply
Input
ACC
—
Battery voltage
8
(GR)
Ground
Illumination control signal
ground
—
ON
—
0 V
SKIB3609E
SKIB3609E
Revision: November 2015
2016 JUKE
AV
AUDIO UNIT
AV-19
< ECU DIAGNOSIS INFORMATION >
[DISPLAY AUDIO]
C
D
E
F
G
H
I
J
K
L
M
B
A
O
P
9
(V)
Ground Illumination control signal
Input
ON
• Lighting switch 1ST
• When meter illumination
is maximum
• Lighting switch 1ST
• When meter illumination
is step 11
• Lighting switch 1ST
• When meter illumination
is minimum
0 V
11
(G)
12
(R)
Sound signal front speaker
RH
Output
ON
Sound output
13
(BR)
14
(Y)
Sound signal rear speaker
RH
Output
ON
Sound output
16
(R)
15
(V)
Steering switch signal B
Input
Ignition
switch
ON
Keep pressing VOL DOWN
switch.
0 V
Keep pressing VOL UP
switch.
1.0 V
Keep pressing TEL END
switch.
2.0 V
Except for above.
5.0 V
18
(Y)
Ground
Vehicle speed signal (8-
pulse)
Input
ON
When vehicle speed is ap-
prox. 40 km/h (25 MPH)
19
(BR)
Ground Battery power supply
Input
OFF
—
Battery voltage
20
(B)
Ground Ground
—
ON
—
0 V
Terminal
(Wire color)
Description
Condition
Reference value
(Approx.)
+
–
Signal name
Input/
Output
Ignition
switch
Operation
JPNIA1687GB
JPNIA1686GB
SKIB3609E
SKIB3609E
JSNIA0012GB
Revision: November 2015
2016 JUKE
Нет комментариевНе стесняйтесь поделиться с нами вашим ценным мнением.
Текст