Nissan Juke (2016 year). Service Repair Manual — part 682
WT-2
Diagnosis Procedure . . . . . . . . . . . ..
SYMPTOM DIAGNOSIS . . . . . . . .
TPMS . . . . . . . . . . . . . . . . .
Symptom Table . . . . . . . . . . . . . ..
LOW TIRE PRESSURE WARNING LAMP
DOES NOT TURN ON . . . . . . . . . ...
Description . . . . . . . . . . . . . . . ..
Diagnosis Procedure . . . . . . . . . . . ..
LOW TIRE PRESSURE WARNING LAMP
DOES NOT TURN OFF . . . . . . . . . .
Description . . . . . . . . . . . . . . . ..
Diagnosis Procedure . . . . . . . . . . . ..
LOW TIRE PRESSURE WARNING LAMP
BLINKS . . . . . . . . . . . . . . . ..
Description . . . . . . . . . . . . . . . ..
Diagnosis Procedure . . . . . . . . . . . ..
TIRE PRESSURE SENSOR ID REGISTRA-
TION CANNOT BE COMPLETED . . . . . .
Description . . . . . . . . . . . . . . . ..
Diagnosis Procedure . . . . . . . . . . . .
NOISE, VIBRATION AND HARSHNESS
(NVH) TROUBLESHOOTING . . . . . . .
NVH Troubleshooting Chart . . . . . . . . ...
PERIODIC MAINTENANCE . . . . . ...
ROAD WHEEL . . . . . . . . . . . . ...
Inspection . . . . . . . . . . . . . . . .
Wheel Balance Adjustment . . . . . . . . . .
Tire Rotation . . . . . . . . . . . . . . ...
REMOVAL AND INSTALLATION . . . ..
ROAD WHEEL TIRE ASSEMBLY . . . . .
Exploded View . . . . . . . . . . . . . .
Removal and Installation . . . . . . . . . . .
Inspection . . . . . . . . . . . . . . . .
TIRE PRESSURE SENSOR . . . . . . . ..
Exploded View . . . . . . . . . . . . . .
Removal and Installation . . . . . . . . . . .
TIRE PRESSURE RECEIVER . . . . . . ...
Removal and Installation . . . . . . . . . . .
SERVICE DATA AND SPECIFICATIONS
(SDS) . . . . . . . . . . . . . . ..
SERVICE DATA AND SPECIFICATIONS
(SDS) . . . . . . . . . . . . . . . . .
Road Wheel . . . . . . . . . . . . . . .
Tire Air Pressure . . . . . . . . . . . . . .
Revision: November 2015
2016 JUKE
PRECAUTIONS
WT-3
< PRECAUTION >
C
D
F
G
H
I
J
K
L
M
A
B
WT
N
O
P
PRECAUTION
PRECAUTIONS
Precaution for Supplemental Restraint System (SRS) "AIR BAG" and "SEAT BELT
PRE-TENSIONER"
INFOID:0000000012201827
The Supplemental Restraint System such as “AIR BAG” and “SEAT BELT PRE-TENSIONER”, used along
with a front seat belt, helps to reduce the risk or severity of injury to the driver and front passenger for certain
types of collision. This system includes seat belt switch inputs and dual stage front air bag modules. The SRS
system uses the seat belt switches to determine the front air bag deployment, and may only deploy one front
air bag, depending on the severity of a collision and whether the front occupants are belted or unbelted.
Information necessary to service the system safely is included in the “SRS AIR BAG” and “SEAT BELT” of this
Service Manual.
WARNING:
Always observe the following items for preventing accidental activation.
• To avoid rendering the SRS inoperative, which could increase the risk of personal injury or death in
the event of a collision that would result in air bag inflation, it is recommended that all maintenance
and repair be performed by an authorized NISSAN/INFINITI dealer.
• Improper repair, including incorrect removal and installation of the SRS, can lead to personal injury
caused by unintentional activation of the system. For removal of Spiral Cable and Air Bag Module,
see “SRS AIR BAG”.
• Never use electrical test equipment on any circuit related to the SRS unless instructed to in this Ser-
vice Manual. SRS wiring harnesses can be identified by yellow and/or orange harnesses or harness
connectors.
PRECAUTIONS WHEN USING POWER TOOLS (AIR OR ELECTRIC) AND HAMMERS
WARNING:
Always observe the following items for preventing accidental activation.
• When working near the Air Bag Diagnosis Sensor Unit or other Air Bag System sensors with the
ignition ON or engine running, never use air or electric power tools or strike near the sensor(s) with
a hammer. Heavy vibration could activate the sensor(s) and deploy the air bag(s), possibly causing
serious injury.
• When using air or electric power tools or hammers, always switch the ignition OFF, disconnect the
battery or batteries, and wait at least 3 minutes before performing any service.
Precautions for Removing Battery Terminal
INFOID:0000000012201828
• When removing the 12V battery terminal, turn OFF the ignition
switch and wait at least 30 seconds.
NOTE:
ECU may be active for several tens of seconds after the ignition
switch is turned OFF. If the battery terminal is removed before ECU
stops, then a DTC detection error or ECU data corruption may
occur.
• For vehicles with the 2-batteries, be sure to connect the main bat-
tery and the sub battery before turning ON the ignition switch.
NOTE:
If the ignition switch is turned ON with any one of the terminals of
main battery and sub battery disconnected, then DTC may be
detected.
• After installing the 12V battery, always check "Self Diagnosis Result" of all ECUs and erase DTC.
NOTE:
The removal of 12V battery may cause a DTC detection error.
Service Notice and Precautions for TPMS
INFOID:0000000012201829
• Low tire pressure warning lamp blinks for 1min, then turns ON when occurring any malfunction except low
tire pressure. Erase the self-diagnosis memories for Tire Pressure Monitoring System (TPMS), or register
the ID to turn low tire pressure warning lamp OFF. For ID registration, refer to
SEF289H
Revision: November 2015
2016 JUKE
WT-4
< PRECAUTION >
PRECAUTIONS
• ID registration is required when replacing or rotating wheels, replacing tire pressure sensor or BCM. Refer to
• Replace grommet seal, valve core and valve cap of tire pressure sensor in TPMS, when replacing each tire
by reaching the wear limit. Refer to
• Because the tire pressure sensor conforms to North America radio law, the following items must be
observed.
- The sensor may be used only in North America.
- It may not be used in any method other than the specified method.
- It must not be disassembled or modified.
Service Notice and Precautions for Road Wheel
INFOID:0000000012201830
• Genuine NISSAN aluminum wheel is designed for each type of vehicle. Use it on the specified vehicle only.
• Use Genuine NISSAN parts for the road wheels, valve caps and wheel nuts.
• Always use them after adjusting the wheel balance. For the balance weights, use Genuine NISSAN alumi-
num wheel weights.
• Use caution when handling the aluminum wheels, because they can be easily scratched. When removing
dirt, do not use any abrasives, a wire brush, or other items that may scratch the coating. Use a neutral deter-
gent if a detergent is needed.
• After driving on roads scattered with anti-icing salts, wash off the wheels completely.
• When installing road wheels onto the vehicle, always wipe off any dirt or foreign substances to prevent them
from being trapped between the contact surfaces of wheel.
• Never apply oil to nut and bolt threads.
• When tightening the valve cap there is a risk of damaging the valve cap if a tool is used. Tighten by hand.
Revision: November 2015
2016 JUKE
PREPARATION
WT-5
< PREPARATION >
C
D
F
G
H
I
J
K
L
M
A
B
WT
N
O
P
PREPARATION
PREPARATION
Special Service Tool
INFOID:0000000012201831
The actual shapes of TechMate tools may differ from those of special service tools illustrated here.
Commercial Service Tool
INFOID:0000000012201832
Tool number
(TechMate No.)
Tool name
Description
—
(J-50190)
Signal tech II
• Activate and display TPMS tire pressure
sensor IDs
• Display tire pressure reported by the TPMS
tire pressure sensor
• Read TPMS DTCs
• Register TPMS tire pressure sensor IDs
• Test remote keyless entry keyfob relative
signal strength
• Compatible with future sensors
• Equipped with a display
KV48105501
(J-45295-A)
Tire pressure sensor activation tool
• Activate TPMS tire pressure sensor IDs
• Compatible with future sensors
• Equipped with a display (KV48105501 only)
ALEIA0131ZZ
ALEIA0183ZZ
Tool name
Description
Power tool
Loosening bolts and nuts
PBIC0190E
Revision: November 2015
2016 JUKE
WT-6
< SYSTEM DESCRIPTION >
COMPONENT PARTS
SYSTEM DESCRIPTION
COMPONENT PARTS
Component Parts Location
INFOID:0000000012201833
Component Description
INFOID:0000000012201834
1.
ABS actuator and electric unit (control
unit)
Refer to
.
2.
BCM
Refer to
SYSTEM : Component Parts Loca-
tion"
3.
Remote keyless entry receiver
(tire pressure receiver)
4.
Tire pressure sensor
A.
View with the glove box assembly re-
moved
B.
Wheel
C.
Low tire pressure warning lamp, in-
formation display
(in combination meter)
JSEIA0322ZZ
Component parts
Function
BCM (Body Control Module)
.
Tire pressure sensor
Tire pressure receiver
WT-7, "Tire Pressure Receiver"
Turn signal lamp
ID registration of each wheel has been completed, turn signal lamp flashes.
Combination meter
Mainly receives the following signals from BCM via CAN communication.
• Low tire pressure warning lamp signal
• TPMS malfunction warning lamp signal
ABS actuator and electric unit (control unit)
Mainly transmits the following signals to BCM via CAN communication.
• Vehicle speed signal (ABS)
Low tire pressure warning lamp
Information display
Revision: November 2015
2016 JUKE
COMPONENT PARTS
WT-7
< SYSTEM DESCRIPTION >
C
D
F
G
H
I
J
K
L
M
A
B
WT
N
O
P
BCM
INFOID:0000000012201835
The BCM reads the air pressure signal received by the tire pressure receiver, and controls the low tire pres-
sure warning lamp operation. It also has a judgment function to detect a system malfunction.
Tire Pressure Sensor
INFOID:0000000012201836
The tire pressure sensor integrated with a valve is installed on a wheel, and transmits a detected air pressure
signal by radio wave.
Tire Pressure Receiver
INFOID:0000000012201837
• The tire pressure receiver is incorporated into remote keyless entry receiver.
• The tire pressure receiver receives the air pressure signal transmitted by the tire pressure sensor in each
wheel.
Information Display
INFOID:0000000012201838
The vehicle information display is shown when a low tire pressure warning lamp signal is transmitted from
BCM to combination meter via CAN communication.
Condition
Vehicle information display
Ignition switch OFF
Not indicated
Ignition switch ON
Low tire pressure warning lamp remains ON after blinking for one
minute. [Tire Pressure Monitoring System (TPMS) malfunction.]
Not indicated
Ignition switch ON
Low tire pressure warning lamp remains ON. (low tire pressure)
Indicated
Revision: November 2015
2016 JUKE
WT-8
< SYSTEM DESCRIPTION >
SYSTEM
SYSTEM
System Description
INFOID:0000000012201839
• During driving, the TPMS (Tire Pressure Monitoring System) receives the signal transmitted from tire pres-
sure sensor installed in each wheel. The BCM (Body Control Module) of this system has pressure judgment
and trouble diagnosis functions. When the tire pressure monitoring system detects low inflation pressure or
another unusual symptom, the low tire pressure warning lamps in the combination meter comes on.
• If the tire pressure is less than the specified value, the low tire pressure warning lamp illuminates that the tire
pressure is less than the specified value.
• Activates the TPMS (Tire Pressure Monitoring System) when the vehicle speed is 40 km/h (25 MPH) or
more.
SYSTEM DIAGRAM
INPUT/OUTPUT SIGNAL
Major signal transmission between each unit via communication lines is shown in the following table.
LOW TIRE PRESSURE WARNING LAMP INDICATION CONDITION
Uses CAN communication from the BCM to illuminate the low tire pressure warning lamp on the combination
meter.
JSEIA0323GB
Component parts
Signal item
Combination meter
Mainly receives the following signals from BCM via CAN communication.
• Low tire pressure warning lamp signal
• TPMS malfunction warning lamp signal
ABS actuator and electric unit (con-
trol unit)
Mainly transmits the following signals to BCM via CAN communication.
• Vehicle speed signal (ABS)
Condition
Low tire pressure warning lamp
Ignition switch OFF
OFF
Ignition switch ON
(system normal)
Warning lamp turns on for 1second, then turns off.
Low tire pressure
ON
Tire pressure sensor ID not registered in BCM
Tire pressure monitoring system malfunction
(Other diagnostic item)
Warning lamp blinks 1 min, then turns on.
Revision: November 2015
2016 JUKE
DIAGNOSIS SYSTEM (BCM)
WT-9
< SYSTEM DESCRIPTION >
C
D
F
G
H
I
J
K
L
M
A
B
WT
N
O
P
DIAGNOSIS SYSTEM (BCM)
COMMON ITEM
COMMON ITEM : CONSULT Function (BCM - COMMON ITEM)
INFOID:0000000013002476
APPLICATION ITEM
CONSULT performs the following functions via CAN communication with BCM.
SYSTEM APPLICATION
BCM can perform the following functions for each system.
NOTE:
It can perform the diagnosis modes except the following for all sub system selection items.
×
: Applicable item
NOTE:
*: For models with automatic A/C, this diagnosis mode is not used.
FREEZE FRAME DATA (FFD)
The BCM records the following vehicle condition at the time a particular DTC is detected, and displays on
CONSULT.
Diagnosis mode
Function Description
Work Support
Changes the setting for each system function.
Self Diagnostic Result
Displays the diagnosis results judged by BCM.
CAN Diag Support Monitor
Monitors the reception status of CAN communication viewed from BCM.
Data Monitor
The BCM input/output signals are displayed.
Active Test
The signals used to activate each device are forcibly supplied from BCM.
Ecu Identification
The BCM part number is displayed.
Configuration
• Read and save the vehicle specification.
• Write the vehicle specification when replacing BCM.
System
Sub system selection item
Diagnosis mode
Work Support
Data Monitor
Active Test
Door lock
DOOR LOCK
×
×
×
Rear window defogger
REAR DEFOGGER
×
×
Warning chime
BUZZER
×
×
Interior room lamp timer
INT LAMP
×
×
×
Exterior lamp
HEAD LAMP
×
×
×
Wiper and washer
WIPER
×
×
×
Turn signal and hazard warning lamps
FLASHER
×
×
×
Air conditioning system
AIR CONDITONER
×
×
*
• Intelligent Key system
• Engine start system
INTELLIGENT KEY
×
×
×
Combination switch
COMB SW
×
Body control system
BCM
×
NVIS - NATS
IMMU
×
×
×
Interior room lamp battery saver
BATTERY SAVER
×
×
×
Back door open
TRUNK
×
Theft warning alarm
THEFT ALM
×
×
×
RAP
RETAINED PWR
×
Signal buffer system
SIGNAL BUFFER
×
×
TPMS
AIR PRESSURE MONITOR
×
×
×
Revision: November 2015
2016 JUKE
Нет комментариевНе стесняйтесь поделиться с нами вашим ценным мнением.
Текст