Nissan Murano Z51 (2008 year). Manual — part 128
DLK-580
< ON-VEHICLE REPAIR >
[WITHOUT INTELLIGENT KEY SYSTEM]
BACK DOOR LOCK
INSTALLATION
Install in the reverse order of removal.
CAUTION:
Check back door open/close, lock/unlock operation after installation.
POWER BACK DOOR DRIVE ASSEMBLY
POWER BACK DOOR DRIVE ASSEMBLY : Exploded View
INFOID:0000000004749875
POWER BACK DOOR DRIVE ASSEMBLY : Removal and Installation
INFOID:0000000004749877
REMOVAL
JMKIA1804GB
1.
TORX bolt
2.
Back door assembly
3.
Power back door drive assembly
4.
Back door lock assembly (normal)
5.
Back door lock assembly (super lock)
6.
Touch sensor (RH/LH)
7.
Cover
8.
Patch
Refer to
for symbols in the figure.
Revision: 2008 October
2009 Murano
BACK DOOR LOCK
DLK-581
< ON-VEHICLE REPAIR >
[WITHOUT INTELLIGENT KEY SYSTEM]
C
D
E
F
G
H
I
J
L
M
A
B
DLK
N
O
P
1.
Remove headlining. Refer to
INT-26, "NORMAL ROOF : Removal and Installation"
(NORMAL ROOF),
INT-29, "SUNROOF : Removal and Installation"
(SUNROOF).
2.
Disconnect power back door drive assembly connector.
3.
Remove mounting bolts of power back door drive assembly (1)
(back door side).
4.
Remove mounting bolts of power back door drive assembly (1)
(body side), and then remove power back door drive assembly.
CAUTION:
Remove the bolts of power back door drive assembly refer-
ring to figure.
INSTALLATION
Install in the reverse order of removal.
CAUTION:
• Install the bolts of power back door drive assembly in the reverse order of removal.
• Check back door open/close operation after installation.
TOUCH SENSOR
JMKIA1918ZZ
JMKIA1919ZZ
Revision: 2008 October
2009 Murano
DLK-582
< ON-VEHICLE REPAIR >
[WITHOUT INTELLIGENT KEY SYSTEM]
BACK DOOR LOCK
TOUCH SENSOR : Exploded View
INFOID:0000000004749879
TOUCH SENSOR : Removal and Installation
INFOID:0000000004749881
CAUTION:
Take care not to bend touch sensor.
REMOVAL
1.
Remove back door finisher inner. Refer to
INT-37, "Removal and Installation"
2.
Disconnect touch sensor connector.
JMKIA1804GB
1.
TORX bolt
2.
Back door assembly
3.
Power back door drive assembly
4.
Back door lock assembly (normal)
5.
Back door lock assembly (super lock)
6.
Touch sensor (RH/LH)
7.
Cover
8.
Patch
Refer to
for symbols in the figure.
Revision: 2008 October
2009 Murano
BACK DOOR LOCK
DLK-583
< ON-VEHICLE REPAIR >
[WITHOUT INTELLIGENT KEY SYSTEM]
C
D
E
F
G
H
I
J
L
M
A
B
DLK
N
O
P
3.
Remove clips and TORX bolts touch sensor (1).
CAUTION:
Remove the TORX bolts (black arrow) and clips (white
arrow) of touch sensor referring to figure.
4.
Pull harness of touch sensor out of back door and remove touch sensor.
INSTALLATION
Install in the reverse order of removal.
CAUTION:
• Install the clips and TORX bolts of touch sensor in the reverse order of removal.
• Never place back door side seal between touch sensor.
• Check back door open/close operation after installation.
JMKIA1920ZZ
Revision: 2008 October
2009 Murano
DLK-584
< ON-VEHICLE REPAIR >
[WITHOUT INTELLIGENT KEY SYSTEM]
FUEL FILLER LID OPENER
FUEL FILLER LID OPENER
Exploded View
INFOID:0000000004749882
Removal and Installation
INFOID:0000000004749883
NOTE:
When fuel filler lid opener actuator is a defective operation, pull the
rod to open fuel filler lid.
REMOVAL
1.
Remove filler cap.
2.
Remove mounting screws (A), and then remove fuel filler lid (1).
3.
Remove luggage side finisher lower (LH). Refer to
INT-34, "Removal and Installation"
.
4.
Locate fuel filler lid opener actuator, and then remove the fuel
filler lid opener actuator.
INSTALLATION
Install in the reverse order of removal.
CAUTION:
1.
Fuel filler lid assembly
2.
Bumper rubber
3.
Fuel filler lid opener actuator
JMKIA1957ZZ
JMKIA1960ZZ
JMKIA1959ZZ
Revision: 2008 October
2009 Murano
FUEL FILLER LID OPENER
DLK-585
< ON-VEHICLE REPAIR >
[WITHOUT INTELLIGENT KEY SYSTEM]
C
D
E
F
G
H
I
J
L
M
A
B
DLK
N
O
P
After installation, apply the touch-up paint (the body color) onto the head of the mounting screws.
Revision: 2008 October
2009 Murano
DLK-586
< ON-VEHICLE REPAIR >
[WITHOUT INTELLIGENT KEY SYSTEM]
DOOR SWITCH
DOOR SWITCH
Removal and Installation
INFOID:0000000003625918
REMOVAL
1.
Remove the door switch mounting bolt (A), and then remove
door switch (1).
INSTALLATION
Install in the reverse order of removal.
JMKIA0171ZZ
Revision: 2008 October
2009 Murano
BACK DOOR OPENER SWITCH ASSEMBLY
DLK-587
< ON-VEHICLE REPAIR >
[WITHOUT INTELLIGENT KEY SYSTEM]
C
D
E
F
G
H
I
J
L
M
A
B
DLK
N
O
P
BACK DOOR OPENER SWITCH ASSEMBLY
Exploded View
INFOID:0000000003737088
Removal and Installation
INFOID:0000000003737089
REMOVAL
1.
Remove the back door finisher inner. Refer to
INT-37, "Removal and Installation"
2.
Remove the back door opener switch assembly (1), and then
remove pawl.
INSTALLATION
Install in the reverse order of removal.
1.
Back door opener switch assembly
JMKIA2182ZZ
JMKIA2176ZZ
Revision: 2008 October
2009 Murano
DLK-588
< ON-VEHICLE REPAIR >
[WITHOUT INTELLIGENT KEY SYSTEM]
KEYFOB BATTERY
KEYFOB BATTERY
Removal and Installation
INFOID:0000000003625915
1.
Release the lock knob at the back of the Intelligent Key and remove the mechanical key.
2.
Insert a flat-blade screwdriver (A) wrapped with a cloth into the
slit of the corner and twist it to separate the upper part from the
lower part.
CAUTION:
• Do not touch the circuit board or battery terminal.
• The key fob is water-resistant. However, if it does get wet,
immediately wipe it dry.
3.
Replace the battery with new one.
4.
Align the tips of the upper and lower parts, and then push them
together until it is securely closed.
CAUTION:
• When replacing battery, keep dirt, grease, and other for-
eign materials off the electrode contact area.
• After replacing the battery, check that all Intelligent Key
functions work normally.
PIIB6221E
Battery replacement
:Coin-type lithium battery
(CR2025)
PIIB6222E
Revision: 2008 October
2009 Murano
REMOTE KEYLESS ENTRY RECEIVER
DLK-589
< ON-VEHICLE REPAIR >
[WITHOUT INTELLIGENT KEY SYSTEM]
C
D
E
F
G
H
I
J
L
M
A
B
DLK
N
O
P
REMOTE KEYLESS ENTRY RECEIVER
Exploded View
INFOID:0000000003737090
Removal and Installation
INFOID:0000000003674391
REMOVAL
1.
Remove the instrument lower panel RH. Refer to
IP-12, "Removal and Installation"
2.
Remove the remote keyless entry receiver mounting bolt (A),
and then remove remote keyless entry receiver (1).
INSTALLATION
Install in the reverse order of removal.
1.
Remote keyless entry receiver
JMKIA2178ZZ
JMKIA2171ZZ
Revision: 2008 October
2009 Murano
DLK-590
< ON-VEHICLE REPAIR >
[WITHOUT INTELLIGENT KEY SYSTEM]
OUTSIDE WARNING BUZZER
OUTSIDE WARNING BUZZER
Exploded View
INFOID:0000000003674394
Removal and Installation
INFOID:0000000003674395
REMOVAL
1.
Remove the outside warning buzzer mounting bolt (A), and then
remove the outside warning buzzer (1).
INSTALLATION
Install in the reverse order of removal.
1.
Outside warning buzzer
JMKIA1827ZZ
JMKIA1828ZZ
Revision: 2008 October
2009 Murano
KEY SLOT
DLK-591
< ON-VEHICLE REPAIR >
[WITHOUT INTELLIGENT KEY SYSTEM]
C
D
E
F
G
H
I
J
L
M
A
B
DLK
N
O
P
KEY SLOT
Exploded View
INFOID:0000000003757844
Removal and Installation
INFOID:0000000003757845
REMOVAL
1.
Remove the instrument lower panel LH (2). Refer to
IP-12, "Removal and Installation"
2.
Disconnect key slot connector.
3.
Remove the key slot mounting screw (A), and then remove key
slot (1) from instrument lower panel LH (2).
INSTALLATION
Install in the reverse order of removal.
1.
Key slot
JMKIA1820ZZ
JMKIA1821ZZ
Revision: 2008 October
2009 Murano
DLK-592
< ON-VEHICLE REPAIR >
[WITHOUT INTELLIGENT KEY SYSTEM]
FUEL FILLER LID OPENER
FUEL FILLER LID OPENER
Exploded View
INFOID:0000000003625919
Removal and Installation
INFOID:0000000003625920
NOTE:
When fuel filler lid opener actuator is a defective operation, pull the
rod to open fuel filler lid.
REMOVAL
1.
Remove filler cap.
2.
Remove mounting screws (A), and then remove fuel filler lid (1).
3.
Remove luggage side finisher lower (LH). Refer to
INT-34, "Removal and Installation"
.
4.
Locate fuel filler lid opener actuator, and then remove the fuel
filler lid opener actuator.
INSTALLATION
Install in the reverse order of removal.
CAUTION:
1.
Fuel filler lid assembly
2.
Bumper rubber
3.
Fuel filler lid opener actuator
JMKIA1957ZZ
JMKIA1960ZZ
JMKIA1959ZZ
Revision: 2008 October
2009 Murano
FUEL FILLER LID OPENER
DLK-593
< ON-VEHICLE REPAIR >
[WITHOUT INTELLIGENT KEY SYSTEM]
C
D
E
F
G
H
I
J
L
M
A
B
DLK
N
O
P
After installation, apply the touch-up paint (the body color) onto the head of the mounting screws.
Revision: 2008 October
2009 Murano
DLN-1
TRANSMISSION & DRIVELINE
C
E
F
G
H
I
J
K
L
M
SECTION
DLN
A
B
DLN
N
O
P
CONTENTS
DRIVELINE
TRANSFER: TY20A
BASIC INSPECTION . . . . . . . . .
DIAGNOSIS AND REPAIR WORK FLOW . . .
Work Flow . . . . . . . . . . . . . . . .....
FUNCTION DIAGNOSIS . . . . . . . ...
AWD SYSTEM . . . . . . . . . . . . . .
System Diagram . . . . . . . . . . . . . ....
System Description . . . . . . . . . . . . ...
Component Parts Location . . . . . . . . . ....
Component Description . . . . . . . . . . .....
DIAGNOSIS SYSTEM (AWD CONTROL
UNIT) . . . . . . . . . . . . . . . . ..
CONSULT-III Function . . . . . . . . . . .
COMPONENT DIAGNOSIS . . . . . . .
C1201 AWD CONTROL UNIT . . . . . . .
Description . . . . . . . . . . . . . . . ..
DTC Logic . . . . . . . . . . . . . . . ...
Diagnosis Procedure . . . . . . . . . . . ...
C1203 ABS ACTUATOR AND ELECTRIC
UNIT (CONTROL UNIT) . . . . . . . . . .
Description . . . . . . . . . . . . . . . ..
DTC Logic . . . . . . . . . . . . . . . ...
Diagnosis Procedure . . . . . . . . . . . ...
C1204 AWD SOLENOID . . . . . . . . .
Description . . . . . . . . . . . . . . . ..
DTC Logic . . . . . . . . . . . . . . . ...
Diagnosis Procedure . . . . . . . . . . . ...
Component Inspection . . . . . . . . . . .
C1205 AWD ACTUATOR RELAY . . . . . .
Description . . . . . . . . . . . . . . . ..
DTC Logic . . . . . . . . . . . . . . . ...
Diagnosis Procedure . . . . . . . . . . . ...
C1210 ECM . . . . . . . . . . . . . ...
Description . . . . . . . . . . . . . . . ...
DTC Logic . . . . . . . . . . . . . . . .
Diagnosis Procedure . . . . . . . . . . . ...
U1000 CAN COMM CIRCUIT . . . . . . ...
Description . . . . . . . . . . . . . . . ...
DTC Logic . . . . . . . . . . . . . . . .
Diagnosis Procedure . . . . . . . . . . . ...
U1010 CONTROL UNIT (CAN) . . . . . . .
Description . . . . . . . . . . . . . . . ...
DTC Logic . . . . . . . . . . . . . . . .
Diagnosis Procedure . . . . . . . . . . . ...
POWER SUPPLY AND GROUND CIRCUIT .
Description . . . . . . . . . . . . . . . ...
Diagnosis Procedure . . . . . . . . . . . ...
AWD LOCK SWITCH . . . . . . . . . .
Description . . . . . . . . . . . . . . . ...
Component Function Check . . . . . . . . .
Diagnosis Procedure . . . . . . . . . . . ...
Component Inspection . . . . . . . . . . . .
AWD WARNING LAMP . . . . . . . . .
Description . . . . . . . . . . . . . . . ...
Component Function Check . . . . . . . . .
Diagnosis Procedure . . . . . . . . . . . ...
AWD LOCK INDICATOR LAMP . . . . . ...
Description . . . . . . . . . . . . . . . ...
Component Function Check . . . . . . . . .
Diagnosis Procedure . . . . . . . . . . . ...
ECU DIAGNOSIS . . . . . . . . . . .
AWD CONTROL UNIT . . . . . . . . . ..
Reference Value . . . . . . . . . . . . . ..
Wiring Diagram - AWD SYSTEM - . . . . . . ..
Fail-Safe . . . . . . . . . . . . . . . . ..
DTC Inspection Priority Chart . . . . . . . . ..
Revision: 2008 October
2009 Murano
DLN-2
DTC Index . . . . . . . . . . . . . . . ..
SYMPTOM DIAGNOSIS . . . . . . . .
AWD WARNING LAMP DOES NOT TURN ON
...
Description . . . . . . . . . . . . . . . ..
Diagnosis Procedure . . . . . . . . . . . ..
AWD WARNING LAMP DOES NOT TURN
OFF . . . . . . . . . . . . . . . . .
Description . . . . . . . . . . . . . . . ..
Diagnosis Procedure . . . . . . . . . . . ..
HEAVY TIGHT-CORNER BRAKING SYMP-
TOM OCCURS . . . . . . . . . . . . ...
Description . . . . . . . . . . . . . . . ..
Diagnosis Procedure . . . . . . . . . . . ..
VEHICLE DOES NOT ENTER AWD MODE . .
Description . . . . . . . . . . . . . . . ..
Diagnosis Procedure . . . . . . . . . . . ..
AWD WARNING LAMP BLINKS QUICKLY . .
Description . . . . . . . . . . . . . . . ..
AWD WARNING LAMP BLINKS SLOWLY . ..
Description . . . . . . . . . . . . . . . ..
Diagnosis Procedure . . . . . . . . . . . ..
NOISE, VIBRATION AND HARSHNESS
(NVH) TROUBLESHOOTING . . . . . . .
NVH Troubleshooting Chart . . . . . . . . ...
PRECAUTION . . . . . . . . . . . .
PRECAUTIONS . . . . . . . . . . . . .
Precaution for Procedure without Cowl Top Cover ...
Service Notice or Precautions for Transfer . . . .
PREPARATION . . . . . . . . . . ...
PREPARATION . . . . . . . . . . . . .
Special Service Tool . . . . . . . . . . . ...
Commercial Service Tool . . . . . . . . . ...
ON-VEHICLE MAINTENANCE . . . . ...
TRANSFER OIL . . . . . . . . . . . . .
Inspection . . . . . . . . . . . . . . . ...
Draining . . . . . . . . . . . . . . . . ..
Refilling . . . . . . . . . . . . . . . . ...
ON-VEHICLE REPAIR . . . . . . . .
AWD CONTROL UNIT . . . . . . . . . ...
Exploded View . . . . . . . . . . . . . ....
Removal and Installation . . . . . . . . . ....
SIDE OIL SEAL . . . . . . . . . . . . .
Exploded View . . . . . . . . . . . . . .
Removal and Installation . . . . . . . . . . .
REMOVAL AND INSTALLATION . . . ..
TRANSFER ASSEMBLY . . . . . . . . ...
Exploded View . . . . . . . . . . . . . .
Removal and Installation . . . . . . . . . . .
DISASSEMBLY AND ASSEMBLY . . .
ADAPTER CASE . . . . . . . . . . . ...
Exploded View . . . . . . . . . . . . . .
Disassembly . . . . . . . . . . . . . . .
Assembly . . . . . . . . . . . . . . . .
Inspection After Disassembly . . . . . . . . ..
GEAR RING . . . . . . . . . . . . . ...
Exploded View . . . . . . . . . . . . . .
Disassembly . . . . . . . . . . . . . . .
Assembly . . . . . . . . . . . . . . . .
Inspection After Disassembly . . . . . . . . ..
DRIVE PINION . . . . . . . . . . . . ...
Exploded View . . . . . . . . . . . . . .
Disassembly . . . . . . . . . . . . . . .
Assembly . . . . . . . . . . . . . . . .
Adjustment . . . . . . . . . . . . . . . ..
Inspection After Disassembly . . . . . . . . ..
TRANSFER CASE . . . . . . . . . . . .
Exploded View . . . . . . . . . . . . . .
Disassembly . . . . . . . . . . . . . . .
Assembly . . . . . . . . . . . . . . . .
Inspection . . . . . . . . . . . . . . . .
SERVICE DATA AND SPECIFICATIONS
(SDS) . . . . . . . . . . . . . . ..
SERVICE DATA AND SPECIFICATIONS
(SDS) . . . . . . . . . . . . . . . . .
General Specifications . . . . . . . . . . .
Preload Torque . . . . . . . . . . . . . ...
Backlash . . . . . . . . . . . . . . . . .
Companion Flange Runout . . . . . . . . . .
REAR PROPELLER SHAFT: 3F63A-EDJ75
SYMPTOM DIAGNOSIS . . . . . . .
NOISE, VIBRATION AND HARSHNESS
(NVH) TROUBLESHOOTING . . . . . . .
NVH Troubleshooting Chart . . . . . . . . .
PREPARATION . . . . . . . . . . ..
PREPARATION . . . . . . . . . . . . .
Commercial Service Tool . . . . . . . . . .
ON-VEHICLE MAINTENANCE . . . . ..
Revision: 2008 October
2009 Murano
Нет комментариевНе стесняйтесь поделиться с нами вашим ценным мнением.
Текст