Nissan Murano Z50 (2004 year). Manual — part 35
BODY REPAIR
BL-153
C
D
E
F
G
H
J
K
L
M
A
B
BL
Revision: 2004 November
2004 Murano
Body Construction
AIS001XX
BODY CONSTRUCTION
SIIA2166E
BL-154
BODY REPAIR
Revision: 2004 November
2004 Murano
Body Alignment
AIS001XY
BODY CENTER MARKS
A mark has been placed on each part of the body to indicate the vehicle center. When repairing parts dam-
aged by an accident which might affect the vehicle frame (members, pillars, etc.), more accurate and effective
repair will be possible by using these marks together with body alignment specifications.
SIIA2167E
BODY REPAIR
BL-155
C
D
E
F
G
H
J
K
L
M
A
B
BL
Revision: 2004 November
2004 Murano
PANEL PARTS MATCHING MARKS
A mark has been placed on each body panel to indicate the parts matching positions. When repairing parts
damaged by an accident which might affect the vehicle structure (members, pillars, etc.), more accurate and
effective repair will be possible by using these marks together with body alignment specifications.
SIIA2168E
BL-156
BODY REPAIR
Revision: 2004 November
2004 Murano
DESCRIPTION
●
All dimensions indicated in the figures are actual.
●
When using a tracking gauge, adjust both pointers to equal length. Then check the pointers and gauge
itself to make sure there is no free play.
●
When a measuring tape is used, check to be sure there is no elongation, twisting or bending.
●
Measurements should be taken at the center of the mounting holes.
●
An asterisk (*) following the value at the measuring point indicates that the measuring point on the other
side is symmetrically the same value.
●
The coordinates of the measurement points are the distances measured from the standard line of
″
X
″
,
″
Y
″
and
″
Z
″
.
PIIA0104E
BODY REPAIR
BL-157
C
D
E
F
G
H
J
K
L
M
A
B
BL
Revision: 2004 November
2004 Murano
ENGINE COMPARTMENT
Measurement
SIIA2169E
BL-158
BODY REPAIR
Revision: 2004 November
2004 Murano
Measurement Points
SIIA2170E
BODY REPAIR
BL-159
C
D
E
F
G
H
J
K
L
M
A
B
BL
Revision: 2004 November
2004 Murano
UNDERBODY
Measurement
SIIA2440E
BL-160
BODY REPAIR
Revision: 2004 November
2004 Murano
Measurement Points
SIIA2441E
BODY REPAIR
BL-161
C
D
E
F
G
H
J
K
L
M
A
B
BL
Revision: 2004 November
2004 Murano
PASSENGER COMPARTMENT
Measurement
SIIA2173E
BL-162
BODY REPAIR
Revision: 2004 November
2004 Murano
Measurement Points
SIIA2174E
BODY REPAIR
BL-163
C
D
E
F
G
H
J
K
L
M
A
B
BL
Revision: 2004 November
2004 Murano
REAR BODY
Measurement
SIIA2175E
BL-164
BODY REPAIR
Revision: 2004 November
2004 Murano
Measurement Points
SIIA2176E
BODY REPAIR
BL-165
C
D
E
F
G
H
J
K
L
M
A
B
BL
Revision: 2004 November
2004 Murano
Handling Precautions For Plastics
AIS001XZ
HANDLING PRECAUTIONS FOR PLASTICS
1.
When repairing and painting a portion of the body adjacent to plastic parts, consider their characteristics
(influence of heat and solvent) and remove them if necessary or take suitable measures to protect them.
2.
Plastic parts should be repaired and painted using methods suiting the materials
,
characteristics.
Abbre-
viation
Material name
Heat
resisting
temperature
°
C(
°
F)
Resistance to gasoline and
solvents
Other cautions
PE
Polyethylene
60(140)
Gasoline and most solvents are
harmless if applied for a very
short time (wipe up quickly).
Flammable
PVC
Poly Vinyl Chloride
80(176)
Same as above.
Poison gas is emitted
when burned.
EPM/
EPDM
Ethylene Propylene (Diene)
copolymer
80(176)
Same as above.
Flammable
TPO
Thermoplastic Olefine
80(176)
Same as above.
Flammable
PP
Polypropylene
90(194)
Same as above.
Flammable, avoid
battery acid.
UP
Unsaturated Polyester
90(194)
Same as above.
Flammable
PS
Polystyrene
80(176)
Avoid solvents.
Flammable
ABS
Acrylonitrile Butadiene Styrene
80(176)
Avoid gasoline and solvents.
PMMA
Poly Methyl Methacrylate
85(185)
Same as above.
EVAC
Ethylene Vinyl Acetate
90(194)
Same as above.
ASA
Acrylonitrile Styrene Acrylate
100(222)
Same as above.
Flammable
PPE
Poly Phenylene Ether
110(230)
Same as above.
PC
Polycarbonate
120(248)
Same as above.
PAR
Polyarylate
180(356)
Same as above.
PUR
Polyurethane
90(194)
Same as above.
POM
Poly Oxymethylene
120(248)
Same as above.
Avoid battery acid.
PBT+
PC
Poly Butylene Terephthalate +
Polycarbonate
120(248)
Same as above.
Flammable
PA
Polyamide
140(284)
Same as above.
Avoid immersing in
water.
PBT
Poly Butylene Terephthalate
140(284)
Same as above.
PET
Polyester
180(356)
Same as above.
PEI
Polyetherimide
200(392)
Same as above.
BL-166
BODY REPAIR
Revision: 2004 November
2004 Murano
LOCATION OF PLASTIC PARTS
SIIA2177E
BODY REPAIR
BL-167
C
D
E
F
G
H
J
K
L
M
A
B
BL
Revision: 2004 November
2004 Murano
SIIA2178E
BL-168
BODY REPAIR
Revision: 2004 November
2004 Murano
Precautions In Repairing High Strength Steel
AIS001Y0
High strength steel is used for body panels in order to reduce vehicle weight.
Accordingly, precautions in repairing automotive bodies made of high strength steel are described below:
HIGH STRENGTH STEEL (HSS) USED IN NISSAN VEHICLES
SP130 is the most commonly used HSS.
SP150 HSS is used only on parts that require much more strength.
Tensile strength
Nissan/Infiniti designation
Major applicable parts
373 N/mm
2
(38kg/mm
2
,54klb/sq in)
SP130
●
Front & rear side member assembly
●
Hoodledge assembly
●
Lower dash
●
Hood
●
Other reinforcements
Нет комментариевНе стесняйтесь поделиться с нами вашим ценным мнением.
Текст