Freightliner Business Class. Manual — part 5
Maintenance Operation Sets for Groups 46 through 83
REQUIRED MAINTENANCE OPERATION SET
IM
M1 M2 M3 M4 M5
Maintenance Operation Number and Operation Description
Air Conditioner Checking, R–12 and R–134a Refrigerant Systems
•
•
•
•
•
•
Table 13, Maintenance Operation Sets for Groups 46 through 83
General Information
00
Maintenance Operation Sets Tables: 00–08
00/15
IMPORTANT: After performing all operations in this
table, perform all daily and weekly maintenance op-
erations listed in the "Pretrip Inspection and Daily
Maintenance" chapter of the
Business Class Trucks
Driver’s Manual
. Also, perform all M1 Maintenance
Interval Operations at the Initial Maintenance (IM).
NOTE: Numbers in this table are maintenance opera-
tion reference numbers matching those in the text of
this manual. The Initial Maintenance consists of all
M1 Operations plus the other operations listed below.
Initial Maintenance (IM) Operations
Maint.
Oper. No.
Initial Maintenance (IM) Operations
Perform All M1 Operations
Clutch (Pull-Type) Inspecting and Adjusting
Eaton Fuller and Meritor Transmission Oil Changing and Magnetic Plug
Cleaning
Aisin Transmission Fluid and Filter Changing and Magnetic Plug Cleaning
Frame Fastener Torque Checking
U-Bolt Torque Checking
All-Axle Alignment Checking
Axle Lubricant Changing and Magnetic Plug Cleaning
Two-Speed-Axle Shift Unit Oil Level Checking
General Information
00
Initial Maintenance (IM) Operations Table: 00–09
00/16
IMPORTANT: After performing all operations in this
table, perform all daily and weekly maintenance op-
erations listed in the "Pretrip Inspection and Daily
Maintenance" chapter of the
Business Class Trucks
Driver’s Manual
.
NOTE: Numbers in this table are maintenance opera-
tion reference numbers matching those in the text of
this manual.
M1 Maintenance Interval Operations
Maint.
Oper. No.
M1 Maintenance Interval Operations
Lubrication and Fluid Level Check (all but FL112, includes the following):
•
Clutch Release Bearing and Cross-Shaft Lubricating
•
Hydraulic Fluid Level Checking
•
Manual Transmission Oil Level Checking
•
Fifth Wheel Lubricating
•
Suspension Lubricating
•
Knuckle Pin Lubricating
•
Tie-Rod End Lubricating
•
All-Wheel-Drive Front Axle Oil Level Checking
•
Axle Lubricant Level Checking
•
Driveline Lubricating
•
Foot Brake Valve Actuator Lubricating, Bendix E-12
•
Manual Slack Adjuster Lubricating
•
Automatic Slack Adjuster Lubricating, Meritor
•
Automatic Slack Adjuster Lubricating, Gunite
•
Automatic Slack Adjuster Lubricating, Haldex
•
Drag Link Lubricating
•
Power Steering Reservoir Fluid Level Checking
•
Steering Gear Lubricating (Ross TAS Series)
•
Weatherstrip, Door Hinge, and Door Latch Lubricating
General Information
00
M1 Maintenance Interval Operations Table: 00–10
00/17
Maint.
Oper. No.
M1 Maintenance Interval Operations
Lubrication and Fluid Level Check (FL112 only, includes the following):
•
Clutch Release Bearing and Cross-Shaft Lubricating
•
Manual Transmission Oil Level Checking
•
Fifth Wheel Lubricating
•
Suspension Lubricating
•
Knuckle Pin Lubricating
•
Tie-Rod End Lubricating
•
All-Wheel-Drive Front Axle Oil Level Checking
•
Axle Lubricant Level Checking
•
Two-Speed-Axle Shift Unit Oil Level Checking
•
Driveline Lubricating
•
Foot Brake Valve Actuator Lubricating, Bendix E-12
•
Camshaft Bracket Bushing Lubricating
•
Manual Slack Adjuster Lubricating
•
Automatic Slack Adjuster Lubricating, Meritor
•
Air Reservoir Automatic Drain Valve Disassembly, Cleaning, Inspect-
ing, and Lubricating, Bendix DV-2
•
Automatic Slack Adjuster Lubricating, Gunite
•
Automatic Slack Adjuster Lubricating, Haldex
•
Steering Driveline Lubricating
•
Drag Link Lubricating
•
Power Steering Reservoir Fluid Level Checking
•
Steering Gear Lubricating (Ross TAS Series)
•
Weatherstrip, Door Hinge, and Door Latch Lubricating
Chrysler Transmission Fluid and Filter Changing
Chrysler Transmission Band Adjusting
Fifth Wheel Inspecting
Suspension Inspecting
Tie-Rod End Inspecting
Axle Breather Checking
Driveline Inspecting
Air Dryer Inspecting, Bendix AD–9
Air Brake Valve Inspecting and Leak Checking, Bendix BP–R1
Air Brake Valve Operation Checking, Bendix BP–R1 and E–12
Relay Valve Checking, Midland
Quick Release and Flipper Valves Checking, Midland
Brake Chamber Inspecting (All Models)
General Information
00
M1 Maintenance Interval Operations Table: 00–10
00/18
Нет комментариевНе стесняйтесь поделиться с нами вашим ценным мнением.
Текст