Kia Carnival (2009+). Manual — part 316
700
2.29
[224]
1.82
[178]
[46]
1.51
[148]
800
1.41
[138]
0.09
[88]
[50]
0.58
[57]
900
0.65
[64]
0.14
[14]
[50]
0
[0]
1,000
0.24
[24]
0
[0]
[24]
1,100
0.24
[24]
0
[0]
[24]
*Test condition:
Ps : Supply Pressure (Ps
=7.1 ± 0.3 KGf/cm")
Pc : Control Pressure
Pex : Exhaust Pressure (Atmosphere pressure)
ATF : DIAMOND ATF SP-Ⅲ
ATF temperature : 30 ± 3°C (86°F)
- Coil resistance : 4.35 ± 35!
- Dither Frequency : 600 ± 20Hz
In case of VFS solenoid valve, the relation between Duty and oil pressure can't be expressed.
2009 > G 2.7 DOHC >
INSPECTION
1. If the value is out of specification according to the chart below, remove the valve body cover.
2. Measure the resistance again after disconnecting solenoid valve connector.
Specification (20°C):
4.3 ~ 4.4! (VFS)
3. If the value is out of specification replace the solenoid valve.
Pin No.
Name
Resistance
7&8
VFS
4.3~4.4! (20°C)
Automatic Transaxle System
Automatic Transaxle Control System - Input
Speed Sensor
Automatic Transaxle System
2009 > G 2.7 DOHC >
DESCRIPTION
Input shaft speed sensor
- Type: Hall sensor
- Current consumption: 22mA (MAX.)
- Sensor body and sensor connector have been unified as one.
Hall type sensor: specification
Air gap (mm)
Input shaft speed sensor
1.3
Coil Resistance
Input shaft speed sensor
over 1M!
Peak-Peak Voltage
High
4.8~5.2V
Low
0.8V
Wave Form With High-scan
Hall Type Sensor: Structure & Interface
Нет комментариевНе стесняйтесь поделиться с нами вашим ценным мнением.
Текст