Hummer H3. Manual — part 951
Fig. 38: Installing Axle Bearing
Courtesy of GENERAL MOTORS CORP.
1. Position the axle bearing in the intermediate housing.
2. Using the J 45232 (1) and the J 8092 (2), install the axle bearing. See Special Tools.
2007 Hummer H3
2007 Driveline/Axle Front Drive Axle - H3
Fig. 39: Installing Axle Seal
Courtesy of GENERAL MOTORS CORP.
3. Using the J 21426 (1), install the axle seal.
2007 Hummer H3
2007 Driveline/Axle Front Drive Axle - H3
Fig. 40: View Of Front Wheel Drive Shaft
Courtesy of GENERAL MOTORS CORP.
4. Install the wheel drive shaft. Refer to Wheel Drive Shaft Replacement .
2007 Hummer H3
2007 Driveline/Axle Front Drive Axle - H3
Fig. 41: View Of Lower Control Arm Swaybar Link
Courtesy of GENERAL MOTORS CORP.
5. Install the swaybar link to the lower control arm. Refer to Stabilizer Shaft Link
Replacement .
6. Check in fluid level. Refer to Front Axle Lubricant Level Inspection.
7. Lower the vehicle.
DIFFERENTIAL CARRIER ASSEMBLY COVER AND/OR GASKET REPLACEMENT
Removal Procedure
2007 Hummer H3
2007 Driveline/Axle Front Drive Axle - H3
Нет комментариевНе стесняйтесь поделиться с нами вашим ценным мнением.
Текст