Hummer H3. Manual — part 903

Fig. 2: View Of Hood Latch Cable
Courtesy of GENERAL MOTORS CORP.

3. Release the hood latch release cable from the hood latch assembly.

4. Attach a length of mechanic's wire to the exterior end of the cable and note the routing of

the cable for later installation.

5. Release the retainers securing the cable to the inner fender and the radiator support.

2007 Hummer H3

2007 ACCESSORIES & EQUIPMENT Bolted Exterior Body Panels and Closures - H3

Fig. 3: View Of Hood Latch Cable Routing
Courtesy of GENERAL MOTORS CORP.

6. Push the cable grommet (1) through the cowl panel and into the interior of the vehicle.

2007 Hummer H3

2007 ACCESSORIES & EQUIPMENT Bolted Exterior Body Panels and Closures - H3

Fig. 4: Identifying Hood Release Handle
Courtesy of GENERAL MOTORS CORP.

7. Remove the screws (1) attaching the hood release handle to the knee bolster.

8. Pull the cable the rest of the way through the cowl panel and out from behind the sound

insulation.

9. Detach the mechanic's wire from the cable, leaving the wire in position for aid in

installation of the cable.

10. Remove the cable from the vehicle.

Installation Procedure

2007 Hummer H3

2007 ACCESSORIES & EQUIPMENT Bolted Exterior Body Panels and Closures - H3

Fig. 5: View Of Hood Latch Cable Routing
Courtesy of GENERAL MOTORS CORP.

1. Attach the mechanic's wire to the exterior end of the cable.

2. Using the mechanic's wire as an aid, guide the cable underneath the sound insulation and

pass the exterior portion of the cable through the cowl panel.

3. Seat the cable grommet (1) to the cowl panel.

2007 Hummer H3

2007 ACCESSORIES & EQUIPMENT Bolted Exterior Body Panels and Closures - H3