Hummer H3. Manual — part 460
the 2 in place of the guide pins. See Special Tools.
4. Remove J 44219 . See Special Tools.
5. Snug the crankshaft rear oil seal housing bolts.
6. Install the remaining two crankshaft rear oil seal housing bolts.
Tighten: Tighten the crankshaft rear oil seal housing bolts to 10 N.m (89 lb in).
NOTE:
Refer to FASTENER NOTICE .
2007 Hummer H3
2007 ENGINE Engine Mechanical - 3.7L - H3
Fig. 657: View Of Bottom Of Oil Pan Sealing Area
Courtesy of GENERAL MOTORS CORP.
7. Wipe off any excess material from the bottom of the oil pan sealing area (1).
OIL PUMP SUCTION PIPE AND SCREEN ASSEMBLY INSTALLATION
2007 Hummer H3
2007 ENGINE Engine Mechanical - 3.7L - H3
Fig. 658: View Of Oil Pump Pipe & Screen Assembly
Courtesy of GENERAL MOTORS CORP.
1. Install a new oil pump pipe gasket.
2. Install the oil pump pipe and screen assembly.
3. Add sealant GM P/N 12346004 (Canadian P/N 10953480) to the oil pump pipe bolt
threads.
4. Install the oil pump pipe and screen assembly bolts.
NOTE:
Refer to FASTENER NOTICE .
2007 Hummer H3
2007 ENGINE Engine Mechanical - 3.7L - H3
Tighten: Tighten the oil pump pipe and screen assembly bolts to 10 N.m (89 lb in).
OIL PAN INSTALLATION
Fig. 659: View Of Oil Pan Sealant Application
Courtesy of GENERAL MOTORS CORP.
1. Apply a 5.5 mm (0.22 in) bead of sealer GM P/N 12378521 (Canadian P/N 88901148) or
equivalent, to the oil pan in areas marked (1).
2. Apply a 3 mm (0.12 in) bead of sealer GM P/N 12378521 (Canadian P/N 88901148) to the
oil pan area marked (2).
2007 Hummer H3
2007 ENGINE Engine Mechanical - 3.7L - H3
Нет комментариевНе стесняйтесь поделиться с нами вашим ценным мнением.
Текст