Hummer H1 (2002+). Manual — part 216
______________________________________________________
Electrical System 12-89
®
05745159
Figure 12-98: Rear Wiper Motor Schematic
C42
REAR
WIPER
MOTOR
M
G4
66 RD
FUSE
11G
25 AMP
SWITCHED
12V
INTERMITTENT
RELAY
59 BK
C20-L13
62 LB
67 BR
C20-C
66 RD
G1
59 BK
REAR
WIPER
SWITCH
C3-A4
67 BR
REAR
WASHER
MOTOR
M
G2
58 BK
59 BK
FUSE
13G
25 AMP
65 YL
00-S12-015
G1
59 BK
G4
17 PP
SWITCHED
12V
38 RD
C1-67
C3-B1
BATT
MAXI
7W
20 AMP
64 LG
C41-59
C20-B
C1-70
C3-E4
943 TN
HEAD-
LAMP
SWITCH
C20-E
C41-D
C41-B
C
D
B
A
C41-C
4-1-00
12-90
Electrical System
_______________________________________________________
®
Left Heated Windshield Inoperative
Step
Action
Value(s)
Yes
No
1
Gain access to the heated windshield connections.
With the ignition in the “RUN” position, preform a
voltage drop test between the yellow wire (CKT 740)
and the black wire (CKT 59) going to the left hand
windshield. Turn the heated windshield “ON”. Is the
specified voltage present?
12v
Replace the
heated
windshield.
Go to step 2.
2
Using a DVOM check the resistance to ground at
the black wire (CKT 59) going to the left side
windshield. Does the resistance to ground meet
the specified range?
<.2
Ω
Go to step 3.
Repair the open
or bad connection
in CKT 59
between the
windshield and
G4.
3
Remove the left hand heated windshield relay from
the exterior fuse box. Check the voltage drop
between cavities 1 (CKT 580) and 2 (CKT 59). With
the ignition in the run position, turn the heated wind-
shield switch to “ON”. Is the specified voltage
present?
12v
Go to step 4.
Repair the open
or bad connec-
tion in CKT 580
between the
heated wind-
shield switch
and Heated
windshield relay
(R-4).
4
With the ignition still in the run position. Preform
a voltage drop test between cavities 2 (CKT 59)
and 3 (CKT 738). Is the specified voltage present?
12v
Go to step 5.
Repair the open
or bad connection
in CKT 738
between fuse 2C
and R-4.
5
With a DVOM check the resistance between cav-
ity 5 (CKT 740) and the yellow wire (CKT 740)
going to the left side windshield. Does the resis-
tance meet the specified value?
<.2
Ω
Replace relay
R-4.
Repair the open
or bad connection
in CKT 740
between the left
side heated wind-
shield and R-4.
4-1-00
______________________________________________________
Electrical System 12-91
®
05745159
Right Heated Windshield Inoperative
Step
Action
Value(s)
Yes
No
1
Gain access to the heated windshield connections.
With the ignition in the “RUN” position and the
heated windshield switch on, preform a voltage drop
test between the purple wire (CKT 739) and the black
wire (CKT 59) going to the right hand windshield.
Turn the heated windshield “ON”. Is the specified
voltage present?
12v
Replace the
heated
windshield.
Go to step 2.
2
Using a DVOM check the resistance to ground at
the black wire (CKT 59) going to the right side
windshield. Does the resistance to ground meet
the specified range?
<.2
Ω
Go to step 3.
Repair the open
or bad connection
in CKT 59
between the
windshield and
G4.
3
Remove the right hand heated windshield relay from
the exterior fuse box. Check the voltage drop
between cavities 1 (CKT 580) and 2 (CKT 59). With
the ignition in the “RUN” position, turn the heated
windshield switch to “ON”. Is the specified voltage
present?
12v
Go to step 4.
Repair the open
or bad connec-
tion in CKT 580
between the
heated wind-
shield switch and
the heated wind-
shield relay (R-2).
4
With the ignition still in the “RUN” position. Preform
a voltage drop test between cavities 2 (CKT 59) and
3 (CKT 737). Is the specified voltage present?
12v
Go to step 5.
Repair the open
or bad connection
in CKT 738
between fuse 2C
and R-2.
5
With a DVOM check the resistance between cav-
ity 5 (CKT 739) and the purple wire (CKT 739)
going to the right side windshield. Does the resis-
tance meet the specified value?
<.2
Ω
Replace relay
R-2.
Repair the open
or bad connection
in CKT 739
between the left
side heated wind-
shield and R-2.
4-1-00
12-92
Electrical System
_______________________________________________________
®
Both Heated Windshields Inoperative
Step
Action
Value(s)
Yes
No
1
Gain access to the heated windshield connections.
Using a DVOM check the resistance to ground on
the black wires at both windshields. Does the
resistance meet the specified value?
<.2
Ω
Go to step 2.
Repair the open
or bad connection
in CKT 59
between the
windshields and
G4.
2
Remove the heated windshield switch from the
bezel. Turn the ignition switch to the “RUN”
position and turn the heated windshield switch to
the “ON” position. Using a DVOM check the
voltage drop between the brown wire (CKT 580)
and the black wire (CKT 58). Is the specified volt-
age present?
12v
Repair the open
or bad connection
in CKT 580
between the
heated wind-
shield switch and
the relays.
Go to step 3.
3
Using a DVOM measure the resistance to ground on
the black wire (CKT 58) at the heated windshield
switch. Does the resistance meet the specification?
<.2
Ω
Go to step 4.
Repair the open
or bad connection
in CKT 58
between the
heated wind-
shield switch and
G4.
4
With the ignition in the “RUN” position and the
heated windshield switch in the “ON” position.
Use a DVOM to check for voltage at both tan
wires (CKT 83) at the heated windshield switch.
Is the specified voltage present?
12v
Replace the
heated wind-
shield switch.
Repair the open
or bad connec-
tion in CKT 83
between the
windshield
switch and fuse
1C interior.
4-1-00
Нет комментариевНе стесняйтесь поделиться с нами вашим ценным мнением.
Текст