Toyota Tundra. Manual — part 2014
8
REMOVE COWL TOP OUTER PANEL SUB-ASSEMBLY (See REMOVAL )
9
REMOVE V-BANK COVER SUB-ASSEMBLY
a
Raise the front of the V-bank cover to detach the 2 pins Then remove the 2 V-bank cover hooks
from the bracket, and remove the V-bank cover
Fig. 186: Removing V-Bank Cover Sub-Assembly
Courtesy of TOYOTA MOTOR SALES, U.S.A., INC.
10
REMOVE AIR CLEANER HOSE ASSEMBLY
a
Disconnect the vacuum hose and ventilation hose
b
Loosen the 2 clamps
Fig. 187: Locating Air Cleaner Hose Assembly Clamps
Courtesy of TOYOTA MOTOR SALES, U.S.A., INC.
c
Remove the air cleaner hose
11
REMOVE AIR CLEANER ASSEMBLY
a
Remove the air cleaner cap
1
Disconnect the MAF meter connector
2
Using a clip remover, detach the wire harness clamp
3
Unfasten the 4 hook clamps and then remove the air cleaner cap
2009 Toyota Tundra
2009 ENGINE Engine Mechanical (3UR-FE) - Tundra
Fig. 188: Locating Air Cleaner Assembly Hook Clamps
Courtesy of TOYOTA MOTOR SALES, U.S.A., INC.
b
Remove the air cleaner element
c
Remove the 2 bolts and air cleaner case
Fig. 189: Locating Air Cleaner Case Bolts
Courtesy of TOYOTA MOTOR SALES, U.S.A., INC.
12
REMOVE INLET RADIATOR HOSE
13
REMOVE OUTLET RADIATOR HOSE
14
REMOVE RADIATOR SIDE DEFLECTOR RH (w/o Trailer Towing System) (See
DISASSEMBLY )
15
REMOVE RADIATOR SIDE DEFLECTOR LH (See DISASSEMBLY )
16
REMOVE OIL COOLER ASSEMBLY (w/ Trailer Towing System)
a
Remove the oil cooler (see REMOVAL )
17
REMOVE FAN AND GENERATOR V BELT (See REMOVAL )
18
REMOVE FAN SHROUD (See REMOVAL )
19
REMOVE RADIATOR ASSEMBLY (See DISASSEMBLY )
20
DISCONNECT FUEL MAIN AND RETURN HOSE
a
Remove the fuel pipe clamp
b
Disconnect the fuel main and return hoses (see FUEL SYSTEM )
2009 Toyota Tundra
2009 ENGINE Engine Mechanical (3UR-FE) - Tundra
Fig. 190: Identifying Fuel Main And Return Hoses
Courtesy of TOYOTA MOTOR SALES, U.S.A., INC.
21
DISCONNECT WIRE HARNESS AND HOSE
a
Disconnect the union to check valve hose
b
Disconnect the purge line hose
Fig. 191: Locating Purge Line Hose
Courtesy of TOYOTA MOTOR SALES, U.S.A., INC.
c
Disconnect the heater hoses
d
Disconnect the clamp and ECM connector
HINT:
Refer to the following procedures to disconnect the ECM connector (see REMOVAL )
2009 Toyota Tundra
2009 ENGINE Engine Mechanical (3UR-FE) - Tundra
Fig. 192: Locating Clamp And ECM Connector
Courtesy of TOYOTA MOTOR SALES, U.S.A., INC.
e
Disconnect the 4 connectors from the connector holder block
Fig. 193: Locating Connector Holder Block Connectors
Courtesy of TOYOTA MOTOR SALES, U.S.A., INC.
f
Remove the nut and connector bracket and disconnect the 2 air pump connectors
Fig. 194: Locating Air Pump Connectors
Courtesy of TOYOTA MOTOR SALES, U.S.A., INC.
g
Remove the bolt and disconnect the ground wire
h
Disconnect the 2 air injection system hoses
i
Remove the nut and disconnect the wire from the positive (+) battery cable
j
Disconnect the cable from the positive (+) battery terminal
k
Remove the bolt and disconnect the ground wire
l
Disconnect the 4 air injection control driver connectors
2009 Toyota Tundra
2009 ENGINE Engine Mechanical (3UR-FE) - Tundra
Нет комментариевНе стесняйтесь поделиться с нами вашим ценным мнением.
Текст