Toyota Tundra. Manual — part 2013
Fig. 178: Identifying Engine Assembly Components With Torque Specification (9 Of 15)
Courtesy of TOYOTA MOTOR SALES, U.S.A., INC.
Fig. 179: Identifying Engine Assembly Components With Torque Specifications (10 Of 15)
Courtesy of TOYOTA MOTOR SALES, U.S.A., INC.
2009 Toyota Tundra
2009 ENGINE Engine Mechanical (3UR-FE) - Tundra
Fig. 180: Identifying Engine Assembly Components With Torque Specifications (11 Of 15)
Courtesy of TOYOTA MOTOR SALES, U.S.A., INC.
Fig. 181: Identifying Engine Assembly Components With Torque Specifications (12 Of 15)
Courtesy of TOYOTA MOTOR SALES, U.S.A., INC.
2009 Toyota Tundra
2009 ENGINE Engine Mechanical (3UR-FE) - Tundra
Fig. 182: Identifying Engine Assembly Components With Torque Specifications (13 Of 15)
Courtesy of TOYOTA MOTOR SALES, U.S.A., INC.
Fig. 183: Identifying Engine Assembly Components With Torque Specifications (14 Of 15)
Courtesy of TOYOTA MOTOR SALES, U.S.A., INC.
Fig. 184: Identifying Engine Assembly Components With Torque Specifications (15 Of 15)
2009 Toyota Tundra
2009 ENGINE Engine Mechanical (3UR-FE) - Tundra
Courtesy of TOYOTA MOTOR SALES, U.S.A., INC.
REMOVAL
1
DISCHARGE FUEL SYSTEM PRESSURE (See FUEL INJECTOR )
2
DISCONNECT CABLE FROM NEGATIVE BATTERY TERMINAL
3
REMOVE NO. 1 ENGINE UNDER COVER (See REPLACEMENT )
4
DRAIN ENGINE OIL (See REPLACEMENT )
5
DRAIN ENGINE COOLANT (See REPLACEMENT )
6
REMOVE HOOD SUB-ASSEMBLY
a
Using a screwdriver, release the 2 clips and remove the hood support assembly
HINT:
Tape the screwdriver tip before use
Fig. 185: Removing Hood Support Assembly
Courtesy of TOYOTA MOTOR SALES, U.S.A., INC.
b
Remove the 4 bolts and hood
7
REMOVE WINDSHIELD WIPER MOTOR ASSEMBLY
a
Remove the windshield wiper motor (see REMOVAL )
NOTE:
After the ignition switch is turned OFF, the navigation system
requires approximately 90 seconds to record various types of
memory and setting. As a result, after turning the ignition switch
OFF, wait 90 seconds or more before disconnecting the cable from
the negative (-) battery terminal.
Some systems need to be initialized after the cable is reconnected
(see INITIALIZATION ).
CAUTION: Remove the hood support assembly while supporting the hood
by hand.
2009 Toyota Tundra
2009 ENGINE Engine Mechanical (3UR-FE) - Tundra
Нет комментариевНе стесняйтесь поделиться с нами вашим ценным мнением.
Текст