Toyota Tundra. Manual — part 435
3. INSTALL NO. 1 SIDE DEFROSTER NOZZLE DUCT (See REASSEMBLY )
4. INSTALL NO. 3 INSTRUMENT PANEL REGISTER ASSEMBLY (See REASSEMBLY )
5. INSTALL NO. 2 SIDE DEFROSTER NOZZLE DUCT (See REASSEMBLY )
6. INSTALL NO. 1 HEATER TO REGISTER DUCT WITH NO. 2 HEATER TO REGISTER DUCT
(See INSTALLATION )
7. INSTALL INSTRUMENT PANEL SUB-ASSEMBLY
a. for Column Shift Type:
Install the instrument panel (See INSTALLATION ).
b. for Floor Shift Type:
Install the instrument panel (see INSTALLATION ).
LIGHT CONTROL RHEOSTAT
COMPONENTS
2009 Toyota Tundra
2009 ACCESSORIES AND EQUIPMENT Meter - Tundra
Fig. 74: Identifying Light Control Rheostat Components
Courtesy of TOYOTA MOTOR SALES, U.S.A., INC.
REMOVAL
1. REMOVE INSTRUMENT CLUSTER FINISH PANEL ASSEMBLY (see REMOVAL )
2. REMOVE LIGHT CONTROL RHEOSTAT
a. Detach the 2 claws and remove the rheostat.
2009 Toyota Tundra
2009 ACCESSORIES AND EQUIPMENT Meter - Tundra
Fig. 75: Identifying Rheostat And Claws
Courtesy of TOYOTA MOTOR SALES, U.S.A., INC.
INSPECTION
1. INSPECT LIGHT CONTROL RHEOSTAT (w/o TAIL Cancel Switch)
a. Measure the resistance according to the value(s) in the table below.
Fig. 76: Light Control Rheostat Diagram
Courtesy of TOYOTA MOTOR SALES, U.S.A., INC.
Standard resistance
2009 Toyota Tundra
2009 ACCESSORIES AND EQUIPMENT Meter - Tundra
LIGHT CONTROL RHEOSTAT (W/O TAIL CANCEL SWITCH) RESISTANCE
REFERENCE
If the result is not as specified, replace the rheostat.
2. INSPECT LIGHT CONTROL RHEOSTAT (w/ TAIL Cancel Switch)
a. Measure the resistance according to the value(s) in the table below.
Fig. 77: Light Control Rheostat (w/ TAIL Cancel Switch) Diagram
Courtesy of TOYOTA MOTOR SALES, U.S.A., INC.
Standard resistance
LIGHT CONTROL RHEOSTAT (W/ TAIL CANCEL SWITCH) RESISTANCE
Tester Connection Switch Condition Specified Condition
3 (RV) - 1 (E)
Downside --> Upside
See illustration
7 (T) - 1 (E)
2009 Toyota Tundra
2009 ACCESSORIES AND EQUIPMENT Meter - Tundra
Нет комментариевНе стесняйтесь поделиться с нами вашим ценным мнением.
Текст