Toyota Tundra. Manual — part 2356
Fig. 73: Identifying Dust Protector
Courtesy of TOYOTA MOTOR SALES, U.S.A., INC.
3
INSTALL STARTER CLUTCH SUB-ASSEMBLY
a
Apply grease to the steel ball, return spring, clutch roller, retainer and idler gear
b
Install the steel ball
c
Install a new O-ring to the starter housing
d
Insert the return spring into the magnet starter switch hole
e
Install the starter clutch, idler gear, retainer and clutch roller
2009 Toyota Tundra
2009 ENG NE Starting (2UZ-FE) - Tundra
Fig. 74: Identifying Starter Clutch Sub-Assembly
Courtesy of TOYOTA MOTOR SALES, U.S.A., INC.
f
Install the starter housing to the magnet switch with the 2 screws
Torque: 9.3 N*m (95 kgf*cm, 82 in.*lbf)
g
Install the dust protector as shown in the illustration
2009 Toyota Tundra
2009 ENG NE Starting (2UZ-FE) - Tundra
Fig. 75: Identifying Dust Protector
Courtesy of TOYOTA MOTOR SALES, U.S.A., INC.
4
INSTALL STARTER YOKE ASSEMBLY
a
Install anew O-ring to the groove of the starter yoke
2009 Toyota Tundra
2009 ENG NE Starting (2UZ-FE) - Tundra
b
Align the protrusion of the starter yoke with the groove of the magnetic switch
Fig. 76: Aligning Protrusion Of Starter Yoke Assembly With Groove Of Magnetic Switch
Courtesy of TOYOTA MOTOR SALES, U.S.A., INC.
2009 Toyota Tundra
2009 ENG NE Starting (2UZ-FE) - Tundra
Нет комментариевНе стесняйтесь поделиться с нами вашим ценным мнением.
Текст