Toyota Tundra. Manual — part 2357
c
Install the starter yoke with the 2 through bolts
Torque: 9.3 N*m (95 kgf*cm, 82 in.*lbf)
Fig. 77: Locating Starter Yoke With Through Bolts
Courtesy of TOYOTA MOTOR SALES, U.S.A., INC.
d
Connect the lead wire to the magnetic switch terminal with the nut
2009 Toyota Tundra
2009 ENG NE Starting (2UZ-FE) - Tundra
Torque: 5.9 N*m (60 kgf*cm, 52 in.*lbf)
INSTALLATION
1
INSTALL STARTER ASSEMBLY
a
Connect the starter wire with the nut
Torque: 9.8 N*m (100 kgf*cm, 87 in.*lbf)
b
Connect the starter connector
c
Connect the starter to the cylinder block
d
Connect the ground wire with the bolt
Torque: 17 N*m (173 kgf*cm, 13 ft.*lbf)
e
Install the engine wire protector to the starter with the bolt
Torque: 9.8 N*m (100 kgf*cm, 87 in.*lbf)
2009 Toyota Tundra
2009 ENG NE Starting (2UZ-FE) - Tundra
Fig. 78: Identifying Engine Wire Protector Bolt
Courtesy of TOYOTA MOTOR SALES, U.S.A., INC.
f
Install the starter with the 2 bolts
2009 Toyota Tundra
2009 ENG NE Starting (2UZ-FE) - Tundra
Torque: 25 N*m (255 kgf*cm, 18 ft.*lbf)
Fig. 79: Locating Starter Assembly Bolts
Courtesy of TOYOTA MOTOR SALES, U.S.A., INC.
2
INSTALL AIR PUMP ASSEMBLY (See INSTALLATION )
3
INSTALL NO. 4 AIR INJECTION SYSTEM HOSE
4
INSTALL WATER BY-PASS PIPE SUB-ASSEMBLY (See INSTALLATION )
2009 Toyota Tundra
2009 ENG NE Starting (2UZ-FE) - Tundra
Нет комментариевНе стесняйтесь поделиться с нами вашим ценным мнением.
Текст