Toyota Tundra. Manual — part 2037
a
Apply a light coat of engine oil to a new O-ring
b
Install the O-ring to the oil strainer
c
Install the oil strainer with the 2 bolts
Torque: 10 N*m (102 kgf*cm, 7 ft.*lbf)
NOTE:
Make sure the O-ring is not twisted or damaged.
2009 Toyota Tundra
2009 ENGINE Engine Mechanical (3UR-FE) - Tundra
Fig. 335: Locating Oil Strainer Sub-Assembly With Mounting Bolts
Courtesy of TOYOTA MOTOR SALES, U.S.A., INC.
7
INSTALL NO. 1 OIL PAN BAFFLE PLATE
a
Install the baffle plate with the 7 bolts
2009 Toyota Tundra
2009 ENGINE Engine Mechanical (3UR-FE) - Tundra
Torque: 10 N*m (102 kgf*cm, 7 ft.*lbf)
Fig. 336: Locating No. 1 Oil Pan Baffle Plate Bolts
Courtesy of TOYOTA MOTOR SALES, U.S.A., INC.
8
INSTALL NO. 1 OIL PAN SUB-ASSEMBLY
a
Apply seal packing in a continuous line as shown in the illustration
2009 Toyota Tundra
2009 ENGINE Engine Mechanical (3UR-FE) - Tundra
Seal packing: Toyota Genuine Seal Packing Black, Three Bond 1207B or equivalent
Standard seal diameter: 3.0 to 4.0 mm (0.118 to 0.157 in.)
NOTE:
Remove any oil from the contact surface.
Install the oil pan within 3 minutes and tighten the bolts and nuts within
15 minutes after applying seal packing.
2009 Toyota Tundra
2009 ENGINE Engine Mechanical (3UR-FE) - Tundra
Нет комментариевНе стесняйтесь поделиться с нами вашим ценным мнением.
Текст